📄 isr.lst
字号:
Sunplus u'nSP Assembler - Ver. 1.14.3.1
Listing File Has Been Relocated
//========================================================
// 文件名称： isr.asm
// 功能描述： 将解码队列的语音资源送到DAC进行播放
// 维护记录： 2005-09-12 v1.0
//========================================================
.INCLUDE a2000.inc
< //////////////////////////////////////////////////////////////////////////////////////////
< // Progarm: SACM-A2000 API external definition for sacmV26e.lib
< // Writen by: Andy
< // Date: 2000/06/20
< // Date: 2001/10/11 Add Manual mode definition
< //////////////////////////////////////////////////////////////////////////////////////////
<
< .EXTERNAL F_SACM_A2000_Initial //
< .EXTERNAL F_SACM_A2000_ServiceLoop // For Auto Mode only
< .EXTERNAL F_SACM_A2000_Play // For Auto Mode only
< .EXTERNAL F_SACM_A2000_Play_Ex // For Auto Mode only/few delay for sentence
< .EXTERNAL F_SACM_A2000_Stop //
< .EXTERNAL F_SACM_A2000_Pause //
< .EXTERNAL F_SACM_A2000_Resume //
< .EXTERNAL F_SACM_A2000_Volume //
< .EXTERNAL F_SACM_A2000_Status //
<
< .EXTERNAL F_SACM_A2000_InitDecoder // For Manual Mode only
< .EXTERNAL F_SACM_A2000_Decoder // For Manual Mode only
< .EXTERNAL F_SACM_A2000_InitQueue // For Manual Mode only
< .EXTERNAL F_SACM_A2000_FillQueue // For Manual Mode only
< .EXTERNAL F_SACM_A2000_TestQueue // For Manual Mode only
<
< .EXTERNAL F_FIQ_Service_SACM_A2000 // ISR
<
<
< //========================================================================================
< // End of a2000.inc
< //========================================================================================
<
.INCLUDE hardware.inc
< //========================================================================================
< // Progarm: The file be included by modules
< // Arranged by: Andy Hsu
< // Date: 2000/06/23: first version
< // 2000/07/24: modified
< // 2000/10/20: modified for version 52A chip sacmv25.lib
< // 2001/10/07: modified for sacmv25f.lib
< // 2001/11/06: Independent Queue for A2000/S480/MS01 Manual Mode
< // 2001/11/06: Fix volume parameter problem - sacmv25i.lib
< // 2005/10/20: Modified for SACMV26e.lib by Xinqiang Zhang
< //
< // For: sacmV26e.lib
< //
< //========================================================================================
<
< //////////////////////////////////////////////////////////////////
< // Definitions for I/O Port
< //////////////////////////////////////////////////////////////////
< .DEFINE P_IOA_Data 0x7000 // Write Data into data register and read from IOA pad
< .DEFINE P_IOA_Buffer 0x7001 // Write Data into buffer register and read from buffer register
< .DEFINE P_IOA_Dir 0x7002 // Direction vector for IOA
< .DEFINE P_IOA_Attrib 0x7003 // Attribute vector for IOA
< .DEFINE P_IOA_Latch 0x7004 // Latch PortA data for key change wake-up
<
< .DEFINE P_IOB_Data 0x7005 // Write Data into the data register and read from IOB pad
< .DEFINE P_IOB_Buffer 0x7006 // Write Data into buffer register and read from buffer register
< .DEFINE P_IOB_Dir 0x7007 // Direction vector for IOB
< .DEFINE P_IOB_Attrib 0x7008 // Attribute vector for IOB
<
< .DEFINE P_FeedBack 0x7009 // Clock form external R,C
< .DEFINE P_TimerA_Data 0x700A // Data port for TimerA
< .DEFINE P_TimerA_Ctrl 0x700B // Control Port for TimerA
< .DEFINE P_TimerB_Data 0x700C // Data port for TimerB
< .DEFINE P_TimerB_Ctrl 0x700D // Control Port for TimerB
< .DEFINE P_TimeBase_Setup 0x700E // TimerBase Freq. Set
< .DEFINE P_TimeBase_Clear 0x700F // Reset Timerbase counter
< .DEFINE P_INT_Ctrl 0x7010 // Control port for interrupt source
< .DEFINE P_INT_Clear 0x7011 // Clear interrupt source
< .DEFINE P_Watchdog_Clear 0x7012 // Watchdog Reset
< .DEFINE P_SystemClock 0x7013 // Change system clock frequency(include go to standby mode)
<
< //... PA6442 New version MC52A (For EC-03)....
< .DEFINE P_ADC 0x7014 // Data Port for AD
< .DEFINE P_ADC_Ctrl 0x7015 // Control Port for AD control
< .DEFINE P_ADC_Status 0x7015 // AD Port Status
< .DEFINE P_DAC2 0x7016 // Data Port for DAC2
< .DEFINE P_PWM 0x7016 // Data Port for PWM
< .DEFINE P_DAC1 0x7017 // Data Port for DAC1
< .DEFINE P_DAC_Ctrl 0x702A // Control Port for two DAC and audio output mode
< //............................................
<
< .DEFINE P_IR_Ctrl 0x7018 // Control Port for IR
< .DEFINE P_LVD_Ctrl 0x7019 // Control Port for LVD
< .DEFINE P_SIO_Data 0x701A // Data port for serial IO
< .DEFINE P_SIO_Addr_Low 0x701B // Address Port low
< .DEFINE P_SIO_Addr_Mid 0x701C // Address Port middle
< .DEFINE P_SIO_Addr_High 0x701D // Address Port high
< .DEFINE P_SIO_Ctrl 0x701E // Control Port
< .DEFINE P_SIO_Start 0x701F // Start port for serial interface
< .DEFINE P_SIO_Stop 0x7020 // Stop port for serial interface
<
< .DEFINE P_UART_Command1 0x7021 // Command1 Port for UART
< .DEFINE P_UART_Command2 0x7022 // Command2 Port for UART
< .DEFINE P_UART_Data 0x7023 // Data Port for UART
< .DEFINE P_UART_BaudScalarLow 0x7024 // Set Baud Rate scalar low
< .DEFINE P_UART_BaudScalarHigh 0x7025 // Set Baud Rate scalar high
<
<
< //... Definitions for P_INT_Ctrl ..............
< .DEFINE C_IRQ6_TMB2 0x0001 // Timer B IRQ6
< .DEFINE C_IRQ6_TMB1 0x0002 // Timer A IRQ6
< .DEFINE C_IRQ5_2Hz 0x0004 // 2Hz IRQ5
< .DEFINE C_IRQ5_4Hz 0x0008 // 4Hz IRQ5
< .DEFINE C_IRQ4_1KHz 0x0010 // 1024Hz IRQ4
< .DEFINE C_IRQ4_2KHz 0x0020 // 2048Hz IRQ4
< .DEFINE C_IRQ4_4KHz 0x0040 // 4096Hz IRQ4
< .DEFINE C_IRQ3_KEY 0x0080 // Key Change IRQ3
< .DEFINE C_IRQ3_EXT1 0x0100 // Ext1 IRQ3
< .DEFINE C_IRQ3_EXT2 0x0200 // Ext2 IRQ3
< .DEFINE C_IRQ2_TMB 0x0400 // Timer B IRQ2
< .DEFINE C_FIQ_TMB 0x0800 // Timer B FIQ
< .DEFINE C_IRQ1_TMA 0x1000 // Timer A IRQ1
< .DEFINE C_FIQ_TMA 0x2000 // Timer A FIQ
< .DEFINE C_IRQ0_PWM 0x4000 // PWM IRQ0
< .DEFINE C_FIQ_PWM 0x8000 // PWM FIQ
<
< // Definitions for P_TimerA/B_Ctrl ............
< .DEFINE C_Fosc_2 0x0000 //
< .DEFINE C_Fosc_256 0x0001 //
< .DEFINE C_32768Hz 0x0002 //
< .DEFINE C_8192Hz 0x0003 //
< .DEFINE C_4096Hz 0x0004 //
< .DEFINE C_A1 0x0005 //
< .DEFINE C_A0 0x0006 //
< .DEFINE C_Ext1 0x0007 //
<
< .DEFINE C_2048Hz 0x0000 //
< .DEFINE C_1024Hz 0x0008 //
< .DEFINE C_256Hz 0x0010 //
< .DEFINE C_TMB1Hz 0x0018 //
< .DEFINE C_4Hz 0x0020 //
< .DEFINE C_2Hz 0x0028 //
< .DEFINE C_B1 0x0030 //
< .DEFINE C_Ext2 0x0038 //
<
< .DEFINE C_Off 0x0000 //
< .DEFINE C_D1 0x0040 //
< .DEFINE C_D2 0x0080 //
< .DEFINE C_D3 0x00C0 //
< .DEFINE C_D4 0x0100 //
< .DEFINE C_D5 0x0140 //
< .DEFINE C_D6 0x0180 //
< .DEFINE C_D7 0x01C0 //
< .DEFINE C_D8 0x0200 //
< .DEFINE C_D9 0x0240 //
< .DEFINE C_D10 0x0280 //
< .DEFINE C_D11 0x02C0 //
< .DEFINE C_D12 0x0300 //
< .DEFINE C_D13 0x0340 //
< .DEFINE C_D14 0x0380 //
< .DEFINE C_TA_Div_2 0x03C0 // Timer A
< .DEFINE C_TB_Div_2 0x03C0 // Timer B
<
< //... Definition for P_SystemClock ............
< .DEFINE C_Fosc 0x0000 // b3..b0
< .DEFINE C_Fosc_Div_2 0x0001 //
< .DEFINE C_Fosc_Div_4 0x0002 //
< .DEFINE C_Fosc_Div_8 0x0003 // (default)
< .DEFINE C_Fosc_Div_16 0x0004 //
< .DEFINE C_Fosc_Div_32 0x0005 //
< .DEFINE C_Fosc_Div_64 0x0006 //
< .DEFINE C_Sleep 0x0007 //
<
< .DEFINE C_32K_Work 0x0000 // b4
< .DEFINE C_32K_Off 0x0000 //
< .DEFINE C_StrongMode 0x0000 // b5
< .DEFINE C_AutoMode 0x0000 //
<
< //... Define for P_AD_Ctrl ....................
< .DEFINE C_AD 0x0001 //
< .DEFINE C_DA 0x0000 //
< .DEFINE C_MIC 0x0000 //
< .DEFINE C_LINE 0x0002 //
<
< //... Define for P_DA_Ctrl ....................
< .DEFINE C_PushPull 0x0000 // b0, (default)
< .DEFINE C_DoubleEnd 0x0001 // b0
< .DEFINE C_DAC_Mode 0x0000 // b1, (default)
< .DEFINE C_PWM_Mode 0x0002 // b1
<
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -