📄 ftoption.h
字号:
/* ... some code ... */
/* return FT_Err_Ok; */
/* } */
/* */
/* You can provide your own implementation of FT_EXPORT and */
/* FT_EXPORT_DEF here if you want. If you leave them undefined, they */
/* will be later automatically defined as `extern return_type' to */
/* allow normal compilation. */
/* */
#undef FT_EXPORT
#undef FT_EXPORT_DEF
/*************************************************************************/
/* */
/* Debug level */
/* */
/* FreeType can be compiled in debug or trace mode. In debug mode, */
/* errors are reported through the `ftdebug' component. In trace */
/* mode, additional messages are sent to the standard output during */
/* execution. */
/* */
/* Define FT_DEBUG_LEVEL_ERROR to build the library in debug mode. */
/* Define FT_DEBUG_LEVEL_TRACE to build it in trace mode. */
/* */
/* Don't define any of these macros to compile in `release' mode! */
/* */
#undef FT_DEBUG_LEVEL_ERROR
#undef FT_DEBUG_LEVEL_TRACE
/*************************************************************************/
/* */
/* Memory Debugging */
/* */
/* FreeType now comes with an integrated memory debugger that is */
/* capable of detecting simple errors like memory leaks or double */
/* deletes. To compile it within your build of the library, you */
/* should define FT_DEBUG_MEMORY here. */
/* */
/* Note that the memory debugger is only activated at runtime when */
/* when the _environment_ variable "FT_DEBUG_MEMORY" is also defined! */
/* */
#undef FT_DEBUG_MEMORY
/*************************************************************************/
/* */
/* The size in bytes of the render pool used by the scan-line converter */
/* to do all of its work. */
/* */
/* This must be greater than 4kByte. */
/* */
#define FT_RENDER_POOL_SIZE 16384L
/*************************************************************************/
/* */
/* FT_MAX_MODULES */
/* */
/* The maximum number of modules that can be registered in a single */
/* FreeType library object. 16 is the default. */
/* */
#define FT_MAX_MODULES 16
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** S F N T D R I V E R C O N F I G U R A T I O N ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* Define TT_CONFIG_OPTION_EMBEDDED_BITMAPS if you want to support */
/* embedded bitmaps in all formats using the SFNT module (namely */
/* TrueType & OpenType). */
/* */
#define TT_CONFIG_OPTION_EMBEDDED_BITMAPS
/*************************************************************************/
/* */
/* Define TT_CONFIG_OPTION_POSTSCRIPT_NAMES if you want to be able to */
/* load and enumerate the glyph Postscript names in a TrueType or */
/* OpenType file. */
/* */
/* Note that when you do not compile the `PSNames' module by undefining */
/* the above FT_CONFIG_OPTION_POSTSCRIPT_NAMES, the `sfnt' module will */
/* contain additional code used to read the PS Names table from a font. */
/* */
/* (By default, the module uses `PSNames' to extract glyph names.) */
/* */
#define TT_CONFIG_OPTION_POSTSCRIPT_NAMES
/*************************************************************************/
/* */
/* Define TT_CONFIG_OPTION_SFNT_NAMES if your applications need to */
/* access the internal name table in a SFNT-based format like TrueType */
/* or OpenType. The name table contains various strings used to */
/* describe the font, like family name, copyright, version, etc. It */
/* does not contain any glyph name though. */
/* */
/* Accessing SFNT names is done through the functions declared in */
/* `freetype/ftnames.h'. */
/* */
#define TT_CONFIG_OPTION_SFNT_NAMES
/*************************************************************************/
/* */
/* TrueType CMap support */
/* */
/* Here you can fine-tune which TrueType CMap table format shall be */
/* supported. */
#define TT_CONFIG_CMAP_FORMAT_0
#define TT_CONFIG_CMAP_FORMAT_2
#define TT_CONFIG_CMAP_FORMAT_4
#define TT_CONFIG_CMAP_FORMAT_6
#define TT_CONFIG_CMAP_FORMAT_8
#define TT_CONFIG_CMAP_FORMAT_10
#define TT_CONFIG_CMAP_FORMAT_12
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** T R U E T Y P E D R I V E R C O N F I G U R A T I O N ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* Define TT_CONFIG_OPTION_BYTECODE_INTERPRETER if you want to compile */
/* a bytecode interpreter in the TrueType driver. Note that there are */
/* important patent issues related to the use of the interpreter. */
/* */
/* By undefining this, you will only compile the code necessary to load */
/* TrueType glyphs without hinting. */
/* */
#undef TT_CONFIG_OPTION_BYTECODE_INTERPRETER
/*************************************************************************/
/* */
/* Define TT_CONFIG_OPTION_INTERPRETER_SWITCH to compile the TrueType */
/* bytecode interpreter with a huge switch statement, rather than a call */
/* table. This results in smaller and faster code for a number of */
/* architectures. */
/* */
/* Note however that on some compiler/processor combinations, undefining */
/* this macro will generate faster, though larger, code. */
/* */
#define TT_CONFIG_OPTION_INTERPRETER_SWITCH
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** T Y P E 1 D R I V E R C O N F I G U R A T I O N ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* T1_MAX_DICT_DEPTH is the maximal depth of nest dictionaries and */
/* arrays in the Type 1 stream (see t1load.c). A minimum of 4 is */
/* required. */
/* */
#define T1_MAX_DICT_DEPTH 5
/*************************************************************************/
/* */
/* T1_MAX_SUBRS_CALLS details the maximum number of nested sub-routine */
/* calls during glyph loading. */
/* */
#define T1_MAX_SUBRS_CALLS 16
/*************************************************************************/
/* */
/* T1_MAX_CHARSTRING_OPERANDS is the charstring stack's capacity. A */
/* minimum of 16 is required. */
/* */
/* The Chinese font MingTiEG-Medium (CNS 11643 character set) needs 256. */
/* */
#define T1_MAX_CHARSTRINGS_OPERANDS 256
/*************************************************************************/
/* */
/* Define T1_CONFIG_OPTION_DISABLE_HINTER if you want to generate a */
/* driver with no hinter. This can be useful to debug the parser. */
/* */
#undef T1_CONFIG_OPTION_DISABLE_HINTER
/*************************************************************************/
/* */
/* Define this configuration macro if you want to prevent the */
/* compilation of `t1afm', which is in charge of reading Type 1 AFM */
/* files into an existing face. Note that if set, the T1 driver will be */
/* unable to produce kerning distances. */
/* */
#undef T1_CONFIG_OPTION_NO_AFM
/*************************************************************************/
/* */
/* Define this configuration macro if you want to prevent the */
/* compilation of the Multiple Masters font support in the Type 1 */
/* driver. */
/* */
#undef T1_CONFIG_OPTION_NO_MM_SUPPORT
/* */
FT_END_HEADER
#endif /* __FTOPTION_H__ */
/* END */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -