📄 m500a.h
字号:
#ifndef M500A_H
#define M500A_H
// P I C C - C O M M A N D S
// commands which are handled by the tag
// Each tag command is written to the reader IC and transfered via RF
#define PICC_REQSTD 0x26 // request idle
#define PICC_REQALL 0x52 // request all
#define PICC_ANTICOLL1 0x93 // anticollision level 1
#define PICC_ANTICOLL2 0x95 // anticollision level 2
#define PICC_ANTICOLL3 0x97 // anticollision level 3
#define PICC_AUTHENT1A 0x60 // authentication step 1
#define PICC_AUTHENT1B 0x61 // authentication step 2
#define PICC_READ 0x30 // read block
#define PICC_WRITE 0xA0 // write block
#define PICC_DECREMENT 0xC0 // decrement value
#define PICC_INCREMENT 0xC1 // increment value
#define PICC_RESTORE 0xC2 // restore command code
#define PICC_TRANSFER 0xB0 // transfer command code
#define PICC_HALT 0x50 // halt
//////////////////////////////////////////////////////////////////////
// Mifare Error Codes
// Each function returns a status value, which corresponds to the
// mifare error codes.
#define MI_OK 0
#define MI_CHK_OK 0
#define MI_CRC_ZERO 0
#define MI_CRC_NOTZERO 1
#define MI_NOTAGERR (-1)
#define MI_CHK_FAILED (-1)
#define MI_CRCERR (-2)
#define MI_CHK_COMPERR (-2)
#define MI_EMPTY (-3)
#define MI_AUTHERR (-4)
#define MI_PARITYERR (-5)
#define MI_CODEERR (-6)
#define MI_SERNRERR (-8)
#define MI_KEYERR (-9)
#define MI_NOTAUTHERR (-10)
#define MI_BITCOUNTERR (-11)
#define MI_BYTECOUNTERR (-12)
#define MI_IDLE (-13)
#define MI_TRANSERR (-14)
#define MI_WRITEERR (-15)
#define MI_INCRERR (-16)
#define MI_DECRERR (-17)
#define MI_READERR (-18)
#define MI_OVFLERR (-19)
#define MI_POLLING (-20)
#define MI_FRAMINGERR (-21)
#define MI_ACCESSERR (-22)
#define MI_UNKNOWN_COMMAND (-23)
#define MI_COLLERR (-24)
#define MI_RESETERR (-25)
#define MI_INITERR (-25)
#define MI_INTERFACEERR (-26)
#define MI_ACCESSTIMEOUT (-27)
#define MI_NOBITWISEANTICOLL (-28)
#define MI_QUIT (-30)
#define MI_RECBUF_OVERFLOW (-50)
#define MI_SENDBYTENR (-51)
#define MI_SENDBUF_OVERFLOW (-53)
#define MI_BAUDRATE_NOT_SUPPORTED (-54)
#define MI_SAME_BAUDRATE_REQUIRED (-55)
#define MI_WRONG_PARAMETER_VALUE (-60)
#define MI_BREAK (-99)
#define MI_NY_IMPLEMENTED (-100)
#define MI_NO_MFRC (-101)
#define MI_MFRC_NOTAUTH (-102)
#define MI_WRONG_DES_MODE (-103)
#define MI_HOST_AUTH_FAILED (-104)
#define MI_WRONG_LOAD_MODE (-106)
#define MI_WRONG_DESKEY (-107)
#define MI_MKLOAD_FAILED (-108)
#define MI_FIFOERR (-109)
#define MI_WRONG_ADDR (-110)
#define MI_DESKEYLOAD_FAILED (-111)
#define MI_WRONG_SEL_CNT (-114)
#define MI_WRONG_TEST_MODE (-117)
#define MI_TEST_FAILED (-118)
#define MI_TOC_ERROR (-119)
#define MI_COMM_ABORT (-120)
#define MI_INVALID_BASE (-121)
#define MI_MFRC_RESET (-122)
#define MI_WRONG_VALUE (-123)
#define MI_VALERR (-124)
#define GetRegPage(addr) (0x80 | (addr>>3))
#define nocard 0
#define mifare1S50 1
#define mifare1S70 2
#define mifarelight 3
#define unknowncard 4
// write data to address 糶
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -