zcl_samplesw.c

Zigbee2007.rar

 * @fn      zclSampleSw_HandleKeys
 *
 * @brief   Handles all key events for this device.
 *
 * @param   shift - true if in shift/alt.
 * @param   keys - bit field for key events. Valid entries:
 *                 HAL_KEY_SW_4
 *                 HAL_KEY_SW_3
 *                 HAL_KEY_SW_2
 *                 HAL_KEY_SW_1
 *
 * @return  none
 */
static void zclSampleSw_HandleKeys( byte shift, byte keys )
{
  zAddrType_t dstAddr;

  if ( keys & HAL_KEY_SW_1 )//up
  {
    // Using this as the "Light Switch"
#ifdef ZCL_ON_OFF
    zclGeneral_SendOnOff_CmdToggle( SAMPLESW_ENDPOINT, &zclSampleSw_DstAddr, false, 0 );
#endif
  }

  if ( keys & HAL_KEY_SW_2 )//right
  {
    HalLedSet ( HAL_LED_4, HAL_LED_MODE_OFF );

    // Initiate an End Device Bind Request, this bind request will
    // only use a cluster list that is important to binding.
    dstAddr.addrMode = afAddr16Bit;
    dstAddr.addr.shortAddr = 0;   // Coordinator makes the match
    ZDP_EndDeviceBindReq( &dstAddr, NLME_GetShortAddr(),
                           SAMPLESW_ENDPOINT,
                           ZCL_HA_PROFILE_ID,
                           0, NULL,   // No incoming clusters to bind
                           ZCLSAMPLESW_BINDINGLIST, bindingOutClusters,
                           TRUE );
  }

  if ( keys & HAL_KEY_SW_3 )
  {
  }

  if ( keys & HAL_KEY_SW_4 )//left
  {
    HalLedSet ( HAL_LED_4, HAL_LED_MODE_OFF );

    // Initiate a Match Description Request (Service Discovery)
    dstAddr.addrMode = AddrBroadcast;
    dstAddr.addr.shortAddr = NWK_BROADCAST_SHORTADDR;
    ZDP_MatchDescReq( &dstAddr, NWK_BROADCAST_SHORTADDR,
                       ZCL_HA_PROFILE_ID,
                       ZCLSAMPLESW_BINDINGLIST, bindingOutClusters,
                       0, NULL,   // No incoming clusters to bind
                       FALSE );
  }
}

/*********************************************************************
 * @fn      zclSampleSw_ProcessIdentifyTimeChange
 *
 * @brief   Called to process any change to the IdentifyTime attribute.
 *
 * @param   none
 *
 * @return  none
 */
static void zclSampleSw_ProcessIdentifyTimeChange( void )
{
  if ( zclSampleSw_IdentifyTime > 0 )
  {
    osal_start_timerEx( zclSampleSw_TaskID, SAMPLESW_IDENTIFY_TIMEOUT_EVT, 1000 );
    HalLedBlink ( HAL_LED_4, 0xFF, HAL_LED_DEFAULT_DUTY_CYCLE, HAL_LED_DEFAULT_FLASH_TIME );
  }
  else
  {
    if ( zclSampleSw_OnOff )
      HalLedSet ( HAL_LED_4, HAL_LED_MODE_ON );
    else
      HalLedSet ( HAL_LED_4, HAL_LED_MODE_OFF );
    osal_stop_timerEx( zclSampleSw_TaskID, SAMPLESW_IDENTIFY_TIMEOUT_EVT );
  }
}

/*********************************************************************
 * @fn      zclSampleSw_BasicResetCB
 *
 * @brief   Callback from the ZCL General Cluster Library
 *          to set all the Basic Cluster attributes to  default values.
 *
 * @param   none
 *
 * @return  none
 */
static void zclSampleSw_BasicResetCB( void )
{
}

/*********************************************************************
 * @fn      zclSampleSw_IdentifyCB
 *
 * @brief   Callback from the ZCL General Cluster Library when
 *          it received an Identity Command for this application.
 *
 * @param   srcAddr - source address and endpoint of the response message
 * @param   identifyTime - the number of seconds to identify yourself
 *
 * @return  none
 */
static void zclSampleSw_IdentifyCB( zclIdentify_t *pCmd )
{
  zclSampleSw_IdentifyTime = pCmd->identifyTime;
  zclSampleSw_ProcessIdentifyTimeChange();
}

/*********************************************************************
 * @fn      zclSampleSw_IdentifyQueryRspCB
 *
 * @brief   Callback from the ZCL General Cluster Library when
 *          it received an Identity Query Response Command for this application.
 *
 * @param   srcAddr - source address
 * @param   timeout - number of seconds to identify yourself (valid for query response)
 *
 * @return  none
 */
static void zclSampleSw_IdentifyQueryRspCB(  zclIdentifyQueryRsp_t *pRsp )
{
  // Query Response (with timeout value)
}

/******************************************************************************
 *
 *  Functions for processing ZCL Foundation incoming Command/Response messages
 *
 *****************************************************************************/

/*********************************************************************
 * @fn      zclSampleSw_ProcessIncomingMsg
 *
 * @brief   Process ZCL Foundation incoming message
 *
 * @param   pInMsg - pointer to the received message
 *
 * @return  none
 */
static void zclSampleSw_ProcessIncomingMsg( zclIncomingMsg_t *pInMsg )
{
  switch ( pInMsg->zclHdr.commandID )
  {
#ifdef ZCL_READ
    case ZCL_CMD_READ_RSP:
      zclSampleSw_ProcessInReadRspCmd( pInMsg );
      break;
#endif
#ifdef ZCL_WRITE
    case ZCL_CMD_WRITE_RSP:
      zclSampleSw_ProcessInWriteRspCmd( pInMsg );
      break;
#endif
#ifdef ZCL_REPORT
    // See ZCL Test Applicaiton (zcl_testapp.c) for sample code on Attribute Reporting
    case ZCL_CMD_CONFIG_REPORT:
      //zclSampleSw_ProcessInConfigReportCmd( pInMsg );
      break;

    case ZCL_CMD_CONFIG_REPORT_RSP:
      //zclSampleSw_ProcessInConfigReportRspCmd( pInMsg );
      break;

    case ZCL_CMD_READ_REPORT_CFG:
      //zclSampleSw_ProcessInReadReportCfgCmd( pInMsg );
      break;

    case ZCL_CMD_READ_REPORT_CFG_RSP:
      //zclSampleSw_ProcessInReadReportCfgRspCmd( pInMsg );
      break;

    case ZCL_CMD_REPORT:
      //zclSampleSw_ProcessInReportCmd( pInMsg );
      break;
#endif
    case ZCL_CMD_DEFAULT_RSP:
      zclSampleSw_ProcessInDefaultRspCmd( pInMsg );
      break;
#ifdef ZCL_DISCOVER
    case ZCL_CMD_DISCOVER_RSP:
      zclSampleSw_ProcessInDiscRspCmd( pInMsg );
      break;
#endif
    default:
      break;
  }

  if ( pInMsg->attrCmd )
    osal_mem_free( pInMsg->attrCmd );
}

#ifdef ZCL_READ
/*********************************************************************
 * @fn      zclSampleSw_ProcessInReadRspCmd
 *
 * @brief   Process the "Profile" Read Response Command
 *
 * @param   pInMsg - incoming message to process
 *
 * @return  none
 */
static uint8 zclSampleSw_ProcessInReadRspCmd( zclIncomingMsg_t *pInMsg )
{
  zclReadRspCmd_t *readRspCmd;
  uint8 i;

  readRspCmd = (zclReadRspCmd_t *)pInMsg->attrCmd;
  for (i = 0; i < readRspCmd->numAttr; i++)
  {
    // Notify the originator of the results of the original read attributes
    // attempt and, for each successfull request, the value of the requested
    // attribute
  }

  return TRUE;
}
#endif // ZCL_READ

#ifdef ZCL_WRITE
/*********************************************************************
 * @fn      zclSampleSw_ProcessInWriteRspCmd
 *
 * @brief   Process the "Profile" Write Response Command
 *
 * @param   pInMsg - incoming message to process
 *
 * @return  none
 */
static uint8 zclSampleSw_ProcessInWriteRspCmd( zclIncomingMsg_t *pInMsg )
{
  zclWriteRspCmd_t *writeRspCmd;
  uint8 i;

  writeRspCmd = (zclWriteRspCmd_t *)pInMsg->attrCmd;
  for (i = 0; i < writeRspCmd->numAttr; i++)
  {
    // Notify the device of the results of the its original write attributes
    // command.
  }

  return TRUE;
}
#endif // ZCL_WRITE

/*********************************************************************
 * @fn      zclSampleSw_ProcessInDefaultRspCmd
 *
 * @brief   Process the "Profile" Default Response Command
 *
 * @param   pInMsg - incoming message to process
 *
 * @return  none
 */
static uint8 zclSampleSw_ProcessInDefaultRspCmd( zclIncomingMsg_t *pInMsg )
{
  // zclDefaultRspCmd_t *defaultRspCmd = (zclDefaultRspCmd_t *)pInMsg->attrCmd;

  // Device is notified of the Default Response command.

  return TRUE;
}

#ifdef ZCL_DISCOVER
/*********************************************************************
 * @fn      zclSampleSw_ProcessInDiscRspCmd
 *
 * @brief   Process the "Profile" Discover Response Command
 *
 * @param   pInMsg - incoming message to process
 *
 * @return  none
 */
static uint8 zclSampleSw_ProcessInDiscRspCmd( zclIncomingMsg_t *pInMsg )
{
  zclDiscoverRspCmd_t *discoverRspCmd;
  uint8 i;

  discoverRspCmd = (zclDiscoverRspCmd_t *)pInMsg->attrCmd;
  for ( i = 0; i < discoverRspCmd->numAttr; i++ )
  {
    // Device is notified of the result of its attribute discovery command.
  }

  return TRUE;
}
#endif // ZCL_DISCOVER


/****************************************************************************
****************************************************************************/