event_array.c

HIP 硬件设备管理标准接口

	"\n"
	"<event name=\"EN_FAULT_PS3_12V_OVR_CUR\" hex=\"08236003\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"
	"       msg=\"Power Supply 3 12V Over Current Fault\" />\n"
	"\n"
	"<event name=\"EN_BLADE_5_CFG_FAIL\" hex=\"0E006005\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"Blade Server 5 is incompatible with I/O module configuration.\" />\n"
	"\n"
	"<event name=\"EN_CUTOFF_HI_OVER_TEMP_CPU3\" hex=\"0421C483\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"System shutoff due to CPU 3 over temperature.\" />\n"
	"\n"
	"<event name=\"EN_BLADE_8_INSTALLED\" hex=\"0E002008\" type=\"ALL\"\n"
	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"Blade Server 8 was installed.\" />\n"
	"\n"
	"<event name=\"EN_IO_5V_WARNING_HI\" hex=\"0A035C00\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"IO Board +5V over recommended voltage.\" />\n"
	"\n"
	"<event name=\"EN_SWITCH_1_CFG_ERROR\" hex=\"0EA0C001\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"I/O module 1 is incompatible with Blade Server configuration. Multiple I/O module failures\" />\n"
	"\n"
	"<event name=\"EN_FAULT_PS3_12V_UNDER\" hex=\"08236803\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"
	"       msg=\"Power Supply 3 12V Under Voltage Fault\" />\n"
	"\n"
	"<event name=\"EN_FAULT_PS2_OVR_TEMP\" hex=\"0821C082\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"
	"       msg=\"Power Supply 2 Temperature Fault\" />\n"
	"\n"
	"<event name=\"EN_MM_NON_REDUNDANT\" hex=\"00284000\" type=\"ALL\"\n"
	"       severity=\"SAHPI_MINOR\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"Chassis Running Nonredundant Management Modules\" />\n"
	"\n"
	"<event name=\"EN_OVER_CURRENT_SWITCH_4\" hex=\"0EA1A404\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"I/O module 4 Current Fault\" />\n"
	"\n"
	"<event name=\"EN_CUTOFF_LO_FAULT_PLANAR_5V\" hex=\"06034800\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"System shutoff due to +5v under voltage.\" />\n"
	"\n"
	"<event name=\"EN_BOOT_FAIL\" hex=\"00000077\" type=\"ALL\"\n"
	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"System Boot Failed\" />\n"
	"\n"
	"<event name=\"EN_OVER_CURRENT_SWITCH_3\" hex=\"0EA1A403\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"I/O module 3 Current Fault\" />\n"
	"\n"
	"<event name=\"EN_BLADE_PWR_DWN\" hex=\"1C000001\" type=\"ALL\"\n"
	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"Blade Server Powered Down\" />\n"
	"\n"
	"<event name=\"EN_SWITCH_1_POWERED_ON\" hex=\"0EA08001\" type=\"ALL\"\n"
	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"I/O module 1 was instructed to power on.\" />\n"
	"\n"
	"<event name=\"EN_SWITCH_1_REMOVED\" hex=\"0EA04001\" type=\"ALL\"\n"
	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"I/O module 1 was removed.\" />\n"
	"\n"
	"<event name=\"EN_CUTOFF_LO_FAULT_12V_PLANAR\" hex=\"06036800\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"System shutoff due to +12v under voltage.\" />\n"
	"\n"
	"<event name=\"EN_THERM_TRIP_CPU2\" hex=\"0421D082\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"CPU 2 Over Temperature\" />\n"
	"\n"
	"<event name=\"EN_CUTOFF_HI_OVER_TEMP_CPU1\" hex=\"0421C481\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"System shutoff due to CPU 1 over temperature.\" />\n"
	"\n"
	"<event name=\"EN_BLADE_A_REMOVED\" hex=\"0E00400A\" type=\"ALL\"\n"
	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"Blade Server 10 was removed.\" />\n"
	"\n"
	"<event name=\"EN_SWITCH_2_POWERED_OFF\" hex=\"0EA06002\" type=\"ALL\"\n"
	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"I/O module 2 was instructed to power off.\" />\n"
	"\n"
	"<event name=\"EN_IO_1_5V_WARNING_HI\" hex=\"0A041C00\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"IO Board +1.5V over recommended voltage.\" />\n"
	"\n"
	"<event name=\"EN_FAULT_PS2_CUR_FAIL\" hex=\"0821A002\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"
	"       msg=\"Power Supply 2 Current Fault\" />\n"
	"\n"
	"<event name=\"EN_PFA_LO_FAULT_1_25V\" hex=\"08001800\" type=\"ALL\"\n"
	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"System under recommended voltage on +1.25v.\" />\n"
	"\n"
	"<event name=\"EN_BLADE_C_INSTALLED\" hex=\"0E00200C\" type=\"ALL\"\n"
	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"Blade Server 12 was installed.\" />\n"
	"\n"
	"<event name=\"EN_CUTOFF_HI_OVER_TEMP_AMBIENT\" hex=\"0001C480\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"System shutoff due to high ambient temperature.\" />\n"
	"\n"
	"<event name=\"EN_BUST_3_3V_WARNING_HI\" hex=\"0E832402\" type=\"ALL\"\n"
	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_EXP\" dup=\"0\"\n"
	"       msg=\"BSE +3.3V over recommended voltage.\" />\n"
	"\n"
	"<event name=\"EN_IO_3_3V_WARNING_HI\" hex=\"0A02DC00\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"IO Board +3.3V over recommended voltage.\" />\n"
	"\n"
	"<event name=\"EN_PFA_HI_FAULT_1_25V\" hex=\"08001400\" type=\"ALL\"\n"
	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"System over recommended voltage on +1.25v.\" />\n"
	"\n"
	"<event name=\"EN_IO_3_3V_WARNING_LOW\" hex=\"0A02CC00\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"IO Board +3.3V under recommended voltage.\" />\n"
	"\n"
	"<event name=\"EN_THERM_TRIP_CPU3\" hex=\"0421D083\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"CPU 3 Over Temperature\" />\n"
	"\n"
	"<event name=\"EN_SWITCH_4_POST_TIMEOUT\" hex=\"0EA0D004\" type=\"ALL\"\n"
	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"I/O module 4 POST Timeout. Multiple I/O module failures\" />\n"
	"\n"
	"<event name=\"EN_DASD\" hex=\"00000069\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"DASD backplane Failure\" />\n"
	"\n"
	"<event name=\"EN_FAULT_PS1_EPOW\" hex=\"08180001\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"
	"       msg=\"Input Voltage Removed from Power Supply 1\" />\n"
	"\n"
	"<event name=\"EN_FAULT_PS3_12V_OVER\" hex=\"08236483\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"
	"       msg=\"Power Supply 3 12V Over Voltage Fault\" />\n"
	"\n"
	"<event name=\"EN_BLADE_4_INSTALLED\" hex=\"0E002004\" type=\"ALL\"\n"
	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"Blade Server 4 was installed.\" />\n"
	"\n"
	"<event name=\"EN_PFA_HI_FAULT_12V_PLANAR\" hex=\"06037500\" type=\"ALL\"\n"
	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"System over recommended voltage for +12v._HPIDUP1\" />\n"
	"\n"
	"<event name=\"EN_CUTOFF_LO_FAULT_3_35V\" hex=\"08032880\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"System shutoff due to +3.3v under voltage.\" />\n"
	"\n"
	"<event name=\"EN_FAULT_POWER_GOOD\" hex=\"00028000\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"Power Good Fault\" />\n"
	"\n"
	"<event name=\"EN_BLADE_2_INSTALLED\" hex=\"0E002002\" type=\"ALL\"\n"
	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"Blade Server 2 was installed.\" />\n"
	"\n"
	"<event name=\"EN_PFA_LO_FAULT_12V_PLANAR\" hex=\"FF037800\" type=\"ALL\"\n"
	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"1\"\n"
	"       msg=\"System under recommended voltage for +12v.\" />\n"
	"\n"
	"<event name=\"EN_FAN2_SPEED\" hex=\"00026802\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"
	"       msg=\"Blower 2 Failure Multiple blower failures\" />\n"
	"\n"
	"<event name=\"EN_CUTOFF_HI_FAULT_3_35V\" hex=\"08032480\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"System shutoff due to +3.3v over voltage.\" />\n"
	"\n"
	"<event name=\"EN_SWITCH_2_CFG_ERROR\" hex=\"0EA0C002\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"I/O module 2 is incompatible with Blade Server configuration. Multiple I/O module failures\" />\n"
	"\n"
	"<event name=\"EN_PFA_LO_FAULT_1_8V\" hex=\"0807B800\" type=\"ALL\"\n"
	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"System is under recommended voltage for 1.8V CPU\" />\n"
	"\n"
	"<event name=\"EN_OVER_TEMP_SWITCH_2\" hex=\"0EA1C402\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"I/O module 2 Temperature Fault Multiple I/O module failures\" />\n"
	"\n"
	"<event name=\"EN_CUTOFF_HI_FAULT_2_5V\" hex=\"08030480\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"System shutoff due to +2.5v over voltage.\" />\n"
	"\n"
	"<event name=\"EN_OVER_TEMP_WARN_SWITCH_3\" hex=\"0EA1D403\" type=\"ALL\"\n"
	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"I/O module 3 Temperature Warning Multiple I/O module failures\" />\n"
	"\n"
	"<event name=\"EN_FAULT_SWITCH_1\" hex=\"0EA00001\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"I/O module 1 Fault Multiple I/O module failures\" />\n"
	"\n"
	"<event name=\"EN_SWITCH_NON_REDUNDANT\" hex=\"0EA16000\" type=\"ALL\"\n"
	"       severity=\"SAHPI_MINOR\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"Chassis Running Nonredundant I/O Modules\" />\n"
	"\n"
	"<event name=\"EN_FAULT_FAN3\" hex=\"0A026003\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"
	"       msg=\"Blower 3 Fault Single blower failure\" />\n"
	"\n"
	"<event name=\"EN_FAULT_PS3_TEMP_WARN\" hex=\"0821C003\" type=\"ALL\"\n"
	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"
	"       msg=\"Power Supply 3 Temperature Warning\" />\n"
	"\n"
	"<event name=\"EN_BLADE_9_COMM_FAIL\" hex=\"0E008009\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"SP Communications Failure on Blade 9.\" />\n"
	"\n"
	"<event name=\"EN_SWITCH_1_CFG_ERROR\" hex=\"0EA0C001\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"I/O module 1 is incompatible with Blade Server configuration.\" />\n"
	"\n"
	"<event name=\"EN_SWITCH_1_POST_ERROR\" hex=\"0EA0E001\" type=\"ALL\"\n"
	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"I/O module 1 POST Error. Multiple I/O module failures\" />\n"
	"\n"
	"<event name=\"EN_SWITCH_3_CFG_ERROR\" hex=\"0EA0C003\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"I/O module 3 is incompatible with Blade Server configuration.\" />\n"
	"\n"
	"<event name=\"EN_PFA_HI_OVER_TEMP_CPU2\" hex=\"0421D502\" type=\"ALL\"\n"
	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"System over temperature for CPU 2.\" />\n"
	"\n"
	"<event name=\"EN_PFA_LO_FAULT_N5V\" hex=\"0803D800\" type=\"ALL\"\n"
	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"
	"       msg=\"System under recommended voltage for -5v.\" />\n"
	"\n"
	"<event name=\"EN_FAN4_SPEED\" hex=\"00026804\" type=\"ALL\"\n"
	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"
	"       msg=\"Blower 4 Failure Single blower failure\" />\n"
	"\n"
	"</events>\n"
	"\0"
};