📄 event_array.c

📁 HIP 硬件设备管理标准接口
💻 C
📖 第 1 页 / 共 5 页
字号:
	"       severity=\"SAHPI_MINOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Insufficient chassis power to support redundancy\" />\n"	"\n"	"<event name=\"EN_OVER_CURRENT_SWITCH_2\" hex=\"0EA1A402\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 2 Current Fault Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_CUTOFF_LO_FAULT_N5V\" hex=\"0803C800\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System shutoff due to -5v under voltage.\" />\n"	"\n"	"<event name=\"EN_SWITCH_3_POST_ERROR\" hex=\"0EA0E003\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 3 POST Error.\" />\n"	"\n"	"<event name=\"EN_BLADE_7_COMM_FAIL\" hex=\"0E008007\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"SP Communications Failure on Blade 7.\" />\n"	"\n"	"<event name=\"EN_BLADE_3_COMM_FAIL\" hex=\"0E008003\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"SP Communications Failure on Blade 3.\" />\n"	"\n"	"<event name=\"EN_FAULT_SWITCH_2\" hex=\"0EA00002\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 2 Fault Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_FAULT_PS3_CUR_FAIL\" hex=\"0821A003\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 3 Current Fault\" />\n"	"\n"	"<event name=\"EN_IO_5V_WARNING_LOW\" hex=\"0A034C00\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"IO Board +5V under recommended voltage.\" />\n"	"\n"	"<event name=\"EN_BUST_18V_WARNING_LOW\" hex=\"0E83C802\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_EXP\" dup=\"0\"\n"	"       msg=\"BSE +18V under recommended voltage.\" />\n"	"\n"	"<event name=\"EN_FAULT_SWITCH_4\" hex=\"0EA00004\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 4 Fault Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_FAULT_PS2_TEMP_WARN\" hex=\"0821C002\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 2 Temperature Warning\" />\n"	"\n"	"<event name=\"EN_FAN1_PFA\" hex=\"000A6001\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Blower 1 Outside Recommended Speed.\" />\n"	"\n"	"<event name=\"EN_CPU_BD_POWER_FAULT\" hex=\"0401A000\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"CPU Board power fault.\" />\n"	"\n"	"<event name=\"EN_SWITCH_4_REMOVED\" hex=\"0EA04004\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 4 was removed.\" />\n"	"\n"	"<event name=\"EN_BUST_1_8V_WARNING_LOW\" hex=\"0E87A802\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_EXP\" dup=\"0\"\n"	"       msg=\"BSE +1.8V under recommended voltage.\" />\n"	"\n"	"<event name=\"EN_FAULT_PS2_12V_OVR_CUR\" hex=\"08236002\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 2 12V Over Current Fault\" />\n"	"\n"	"<event name=\"EN_FAULT_VRM_POWER_GOOD\" hex=\"04428000\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"VRM Power Good Fault\" />\n"	"\n"	"<event name=\"EN_OVER_CURRENT_SWITCH_4\" hex=\"0EA1A404\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 4 Current Fault Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_FAULT_PS4_12V_OVR_CUR\" hex=\"08236004\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 4 12V Over Current Fault\" />\n"	"\n"	"<event name=\"EN_PROC_HOT_CPU3\" hex=\"0421C403\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"CPU 3 shut off due to over temperature\" />\n"	"\n"	"<event name=\"EN_SWITCH_3_POWERED_OFF\" hex=\"0EA06003\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 3 was instructed to power off.\" />\n"	"\n"	"<event name=\"EN_SWITCH_3_REMOVED\" hex=\"0EA04003\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 3 was removed.\" />\n"	"\n"	"<event name=\"EN_SWITCH_3_POWERED_ON\" hex=\"0EA08003\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 3 was instructed to power on.\" />\n"	"\n"	"<event name=\"EN_PFA_LO_FAULT_2_5V\" hex=\"FF031880\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"1\"\n"	"       msg=\"System under recommended voltage on +2.5v.\" />\n"	"\n"	"<event name=\"EN_CUTOFF_HI_FAULT_1_8V\" hex=\"0807A480\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System shutoff due to 1.8V CPU over voltage\" />\n"	"\n"	"<event name=\"EN_SWITCH_2_POWERED_ON\" hex=\"0EA08002\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 2 was instructed to power on.\" />\n"	"\n"	"<event name=\"EN_FAULT_SWITCH_1\" hex=\"0EA00001\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 1 Fault\" />\n"	"\n"	"<event name=\"EN_BUST_2_5V_WARNING_HI\" hex=\"0E830402\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_EXP\" dup=\"0\"\n"	"       msg=\"BSE +2.5V over recommended voltage.\" />\n"	"\n"	"<event name=\"EN_FAULT_PS1_12V_OVER\" hex=\"08236481\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 1 12V Over Voltage Fault\" />\n"	"\n"	"<event name=\"EN_FAULT_SYS_POWER_GOOD\" hex=\"00028001\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System Power Good Fault\" />\n"	"\n"	"<event name=\"EN_SWITCH_4_POST_ERROR\" hex=\"0EA0E004\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 4 POST Error.\" />\n"	"\n"	"<event name=\"EN_BLADE_1_CFG_FAIL\" hex=\"0E006001\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 1 is incompatible with I/O module configuration.\" />\n"	"\n"	"<event name=\"EN_OVER_TEMP_SWITCH_1\" hex=\"0EA1C401\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 1 Temperature Fault Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_SWITCH_1_POST_ERROR\" hex=\"0EA0E001\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 1 POST Error.\" />\n"	"\n"	"<event name=\"EN_PS1_INSTALLED\" hex=\"08216001\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 1 was installed.\" />\n"	"\n"	"<event name=\"EN_FAULT_PS1_12V_UNDER\" hex=\"08236801\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 1 12V Under Voltage Fault\" />\n"	"\n"	"<event name=\"EN_BLADE_C_CFG_FAIL\" hex=\"0E00600C\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 12 is incompatible with I/O module configuration.\" />\n"	"\n"	"<event name=\"EN_FAULT_PS1\" hex=\"08200001\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 1 Fault\" />\n"	"\n"	"<event name=\"EN_IO_1_5V_WARNING_LOW\" hex=\"0A040C00\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"IO Board +1.5V under recommended voltage.\" />\n"	"\n"	"<event name=\"EN_BLADE_8_CFG_FAIL\" hex=\"0E006008\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 8 is incompatible with I/O module configuration.\" />\n"	"\n"	"<event name=\"EN_FAULT_SWITCH_4\" hex=\"0EA00004\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 4 Fault\" />\n"	"\n"	"<event name=\"EN_FAULT_PS4\" hex=\"08200004\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 4 Fault\" />\n"	"\n"	"<event name=\"EN_PFA_LO_FAULT_5V\" hex=\"08035800\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System under recommended 5V Fault.\" />\n"	"\n"	"<event name=\"EN_FAN3_SPEED\" hex=\"00026803\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Blower 3 Failure Single blower failure\" />\n"	"\n"	"<event name=\"EN_MM_1_INSTALLED\" hex=\"00282001\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Management Module 1 was installed.\" />\n"	"\n"	"<event name=\"EN_BLADE_E_INSTALLED\" hex=\"0E00200E\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 14 was installed.\" />\n"	"\n"	"<event name=\"EN_BLADE_B_CFG_FAIL\" hex=\"0E00600B\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 11 is incompatible with I/O module configuration.\" />\n"	"\n"	"<event name=\"EN_FAULT_PS3_DC_GOOD\" hex=\"08028003\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 3 DC Good Fault\" />\n"	"\n"	"<event name=\"EN_BLADE_9_REMOVED\" hex=\"0E004009\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 9 was removed.\" />\n"	"\n"	"<event name=\"EN_BLADE_B_REMOVED\" hex=\"0E00400B\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 11 was removed.\" />\n"	"\n"	"<event name=\"EN_BLADE_A_CFG_FAIL\" hex=\"0E00600A\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 10 is incompatible with I/O module configuration.\" />\n"	"\n"	"<event name=\"EN_BLADE_9_INSTALLED\" hex=\"0E002009\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 9 was installed.\" />\n"	"\n"	"<event name=\"EN_PFA_LO_FAULT_2_5V\" hex=\"08031880\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System under recommended voltage on +2.5v._HPIDUP1\" />\n"	"\n"	"<event name=\"EN_FAULT_FP_R\" hex=\"09020000\" type=\"ALL\"\n"	"       severity=\"SAHPI_MINOR\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"System front panel controller not responding.\" />\n"	"\n"	"<event name=\"EN_IO_12V_WARNING_LOW\" hex=\"0A036C00\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"IO Board +12V under recommended voltage.\" />\n"	"\n"	"<event name=\"EN_MEDIA_TRAY_REMOVED\" hex=\"06A1E001\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"The media tray was removed.\" />\n"	"\n"	"<event name=\"EN_FAULT_PS1_REMOVED\" hex=\"0821E001\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 1 Removed.\" />\n"	"\n"	"<event name=\"EN_BUST_18V_WARNING_HI\" hex=\"0E83C402\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_EXP\" dup=\"0\"\n"	"       msg=\"BSE +18V over recommended voltage.\" />\n"	"\n"	"<event name=\"EN_SWITCH_2_REMOVED\" hex=\"0EA04002\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 2 was removed.\" />\n"	"\n"	"<event name=\"EN_FAULT_PS3_EPOW\" hex=\"08180003\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Input Voltage Removed from Power Supply 3\" />\n"	"\n"	"<event name=\"EN_BUST_3_3V_WARNING_LOW\" hex=\"0E832802\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_EXP\" dup=\"0\"\n"	"       msg=\"BSE +3.3V under recommended voltage.\" />\n"
⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -