📄 event_array.c

📁 HIP 硬件设备管理标准接口
💻 C
📖 第 1 页 / 共 5 页
字号:
	"\n"	"<event name=\"EN_CUTOFF_HI_FAULT_PLANAR_5V\" hex=\"06034480\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System shutoff due to +5v over voltage.\" />\n"	"\n"	"<event name=\"EN_BLADE_2_COMM_FAIL\" hex=\"0E008002\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"SP Communications Failure on Blade 2.\" />\n"	"\n"	"<event name=\"EN_SWITCH_2_POST_ERROR\" hex=\"0EA0E002\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 2 POST Error. Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_BLADE_C_REMOVED\" hex=\"0E00400C\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 12 was removed.\" />\n"	"\n"	"<event name=\"EN_BLADE_PWR_DN_PM_TEMP\" hex=\"0821C080\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Power Modules are over temperature, Blade Server Powering Down\" />\n"	"\n"	"<event name=\"EN_FAN2_PFA\" hex=\"000A6002\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Blower 2 Outside Recommended Speed.\" />\n"	"\n"	"<event name=\"EN_CUTOFF_HI_OVER_TEMP_DASD1\" hex=\"0681C481\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_EXP\" dup=\"0\"\n"	"       msg=\"System shutoff due to BSE Option temperature.\" />\n"	"\n"	"<event name=\"EN_SWITCH_3_POST_TIMEOUT\" hex=\"0EA0D003\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 3 POST Timeout.\" />\n"	"\n"	"<event name=\"EN_BLADE_1_REMOVED\" hex=\"0E004001\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 1 was removed.\" />\n"	"\n"	"<event name=\"EN_BLADE_9_CFG_FAIL\" hex=\"0E006009\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 9 is incompatible with I/O module configuration.\" />\n"	"\n"	"<event name=\"EN_FAULT_SWITCH_3\" hex=\"0EA00003\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 3 Fault\" />\n"	"\n"	"<event name=\"EN_CPU_BD_VOLTAGE_FAULT\" hex=\"04018000\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"CPU Board voltage fault.\" />\n"	"\n"	"<event name=\"EN_TEST_EVENT\" hex=\"FFFFFFFF\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"NO_OVR\" dup=\"0\"\n"	"       msg=\"Bogus Test Event.\" />\n"	"\n"	"<event name=\"EN_SWITCH_2_CFG_ERROR\" hex=\"0EA0C002\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 2 is incompatible with Blade Server configuration.\" />\n"	"\n"	"<event name=\"EN_BLADE_D_INSTALLED\" hex=\"0E00200D\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 13 was installed.\" />\n"	"\n"	"<event name=\"EN_PFA_HI_FAULT_2_5V\" hex=\"FF031480\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"1\"\n"	"       msg=\"System over recommended voltage on +2.5v.\" />\n"	"\n"	"<event name=\"EN_PFA_HI_OVER_TEMP_CPU1\" hex=\"0421D501\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System over temperature for CPU 1.\" />\n"	"\n"	"<event name=\"EN_FAN4_SPEED\" hex=\"00026804\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Blower 4 Failure Multiple blower failures\" />\n"	"\n"	"<event name=\"EN_OVER_TEMP_SWITCH_3\" hex=\"0EA1C403\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 3 Temperature Fault Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_OVER_CURRENT_SWITCH_1\" hex=\"0EA1A401\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 1 Current Fault Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_BLADE_3_CFG_FAIL\" hex=\"0E006003\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 3 is incompatible with I/O module configuration.\" />\n"	"\n"	"<event name=\"EN_FAULT_PS2_REMOVED\" hex=\"0821E002\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 2 Removed.\" />\n"	"\n"	"<event name=\"EN_PROC_HOT_CPU2\" hex=\"0421C402\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"CPU 2 shut off due to over temperature\" />\n"	"\n"	"<event name=\"EN_BLADE_D_REMOVED\" hex=\"0E00400D\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 13 was removed.\" />\n"	"\n"	"<event name=\"EN_BLADE_6_REMOVED\" hex=\"0E004006\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 6 was removed.\" />\n"	"\n"	"<event name=\"EN_BLADE_D_CFG_FAIL\" hex=\"0E00600D\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 13 is incompatible with I/O module configuration.\" />\n"	"\n"	"<event name=\"EN_FAN1_SPEED\" hex=\"00026801\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Blower 1 Failure Multiple blower failures\" />\n"	"\n"	"<event name=\"EN_PFA_LO_FAULT_PLANAR_5V\" hex=\"06035800\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System under recommended voltage for +5v.\" />\n"	"\n"	"<event name=\"EN_FAN3_PFA\" hex=\"000A6003\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Blower 3 Outside Recommended Speed.\" />\n"	"\n"	"<event name=\"EN_CUTOFF_HI_OVER_TEMP_CPU2\" hex=\"0421C482\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System shutoff due to CPU 2 over temperature.\" />\n"	"\n"	"<event name=\"EN_MM_1_REMOVED\" hex=\"00284001\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Management Module 1 was removed.\" />\n"	"\n"	"<event name=\"EN_BUST_5V_WARNING_LOW\" hex=\"0E834802\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_EXP\" dup=\"0\"\n"	"       msg=\"BSE +5V under recommended voltage.\" />\n"	"\n"	"<event name=\"EN_PFA_HI_OVER_TEMP_DASD1\" hex=\"0681D481\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_EXP\" dup=\"0\"\n"	"       msg=\"BSE Option over recommended temperature.\" />\n"	"\n"	"<event name=\"EN_FAULT_PS2_12V_OVER\" hex=\"08236482\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 2 12V Over Voltage Fault\" />\n"	"\n"	"<event name=\"EN_OVER_TEMP_WARN_SWITCH_2\" hex=\"0EA1D402\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 2 Temperature Warning Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_PFA_HI_OVER_TEMP_CPU3\" hex=\"0421D503\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System over temperature for CPU 3.\" />\n"	"\n"	"<event name=\"EN_OVER_TEMP_WARN_SWITCH_3\" hex=\"0EA1D403\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 3 Temperature Warning\" />\n"	"\n"	"<event name=\"EN_SWITCH_4_CFG_ERROR\" hex=\"0EA0C004\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 4 is incompatible with Blade Server configuration. Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_IO_BD_VOLTAGE_FAULT\" hex=\"06018000\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"IO Board voltage fault.\" />\n"	"\n"	"<event name=\"EN_BLADE_6_COMM_FAIL\" hex=\"0E008006\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"SP Communications Failure on Blade 6.\" />\n"	"\n"	"<event name=\"EN_BLADE_2_REMOVED\" hex=\"0E004002\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 2 was removed.\" />\n"	"\n"	"<event name=\"EN_SWITCH_2_INSTALLED\" hex=\"0EA02002\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 2 was installed.\" />\n"	"\n"	"<event name=\"EN_FAULT_PS1_TEMP_WARN\" hex=\"0821C001\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 1 Temperature Warning\" />\n"	"\n"	"<event name=\"EN_SWITCH_1_POST_TIMEOUT\" hex=\"0EA0D001\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 1 POST Timeout. Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_BLADE_3_REMOVED\" hex=\"0E004003\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 3 was removed.\" />\n"	"\n"	"<event name=\"EN_MM_2_REMOVED\" hex=\"00284002\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Management Module 2 was removed.\" />\n"	"\n"	"<event name=\"EN_FAULT_FAN3\" hex=\"0A026003\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Blower 3 Fault Multiple blower failures\" />\n"	"\n"	"<event name=\"EN_SWITCH_3_INSTALLED\" hex=\"0EA02003\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 3 was installed.\" />\n"	"\n"	"<event name=\"EN_FAULT_PS1_OVR_TEMP\" hex=\"0821C081\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 1 Temperature Fault\" />\n"	"\n"	"<event name=\"EN_PROC_HOT_CPU4\" hex=\"0421C404\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"CPU 4 shut off due to over temperature\" />\n"	"\n"	"<event name=\"EN_BUST_1_8V_WARNING_HI\" hex=\"0E87A402\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_EXP\" dup=\"0\"\n"	"       msg=\"BSE +1.8V over recommended voltage.\" />\n"	"\n"	"<event name=\"EN_FAULT_SWITCH_3\" hex=\"0EA00003\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 3 Fault Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_SWITCH_3_POST_ERROR\" hex=\"0EA0E003\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 3 POST Error. Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_BUST_5V_WARNING_HI\" hex=\"0E834402\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_EXP\" dup=\"0\"\n"	"       msg=\"BSE +5V over recommended voltage.\" />\n"	"\n"	"<event name=\"EN_BUST_12V_WARNING_LOW\" hex=\"0E836802\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_EXP\" dup=\"0\"\n"	"       msg=\"BSE +12V under recommended voltage.\" />\n"	"\n"	"<event name=\"EN_OVER_TEMP_SWITCH_4\" hex=\"0EA1C404\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 4 Temperature Fault Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_OVER_TEMP_WARN_SWITCH_4\" hex=\"0EA1D404\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 4 Temperature Warning Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_OVER_CURRENT_SWITCH_3\" hex=\"0EA1A403\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 3 Current Fault Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_OVER_TEMP_SWITCH_2\" hex=\"0EA1C402\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 2 Temperature Fault\" />\n"	"\n"	"<event name=\"EN_OVER_CURRENT_SWITCH_1\" hex=\"0EA1A401\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 1 Current Fault\" />\n"	"\n"	"<event name=\"EN_IO_BD_POWER_FAULT\" hex=\"0601A000\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"IO Board power fault.\" />\n"	"\n"	"<event name=\"EN_NR_PWR_SUPPLY\" hex=\"08080001\" type=\"ALL\"\n"
⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -