📄 event_array.c

📁 HIP 硬件设备管理标准接口
💻 C
📖 第 1 页 / 共 5 页
字号:
	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_EXP\" dup=\"0\"\n"	"       msg=\"BSE +12V over recommended voltage.\" />\n"	"\n"	"<event name=\"EN_NC_VOLT\" hex=\"0000006F\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System over/under recommended voltage\" />\n"	"\n"	"<event name=\"EN_IO_12V_WARNING_HI\" hex=\"0A037C00\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"IO Board +12V over recommended voltage.\" />\n"	"\n"	"<event name=\"EN_BLADE_4_REMOVED\" hex=\"0E004004\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 4 was removed.\" />\n"	"\n"	"<event name=\"EN_BLADE_5_COMM_FAIL\" hex=\"0E008005\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"SP Communications Failure on Blade 5.\" />\n"	"\n"	"<event name=\"EN_BLADE_5_INSTALLED\" hex=\"0E002005\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 5 was installed.\" />\n"	"\n"	"<event name=\"EN_OVER_TEMP_WARN_SWITCH_2\" hex=\"0EA1D402\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 2 Temperature Warning\" />\n"	"\n"	"<event name=\"EN_FAULT_PS4_OVR_TEMP\" hex=\"0821C084\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 4 Temperature Fault\" />\n"	"\n"	"<event name=\"EN_CUTOFF_HI_FAULT_VRM1\" hex=\"04400481\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System shutoff due to VRM 1 over voltage.\" />\n"	"\n"	"<event name=\"EN_PFA_HI_FAULT_3_35V\" hex=\"08033480\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System over recommended voltage on +3.3v._HPIDUP1\" />\n"	"\n"	"<event name=\"EN_SWITCH_2_POST_TIMEOUT\" hex=\"0EA0D002\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 2 POST Timeout.\" />\n"	"\n"	"<event name=\"EN_IO_2_5V_WARNING_HI\" hex=\"0A031C00\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"IO Board +2.5V over recommended voltage.\" />\n"	"\n"	"<event name=\"EN_PFA_HI_FAULT_1_5V\" hex=\"08041400\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System over recommended voltage on +1.5v.\" />\n"	"\n"	"<event name=\"EN_BLADE_6_CFG_FAIL\" hex=\"0E006006\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 6 is incompatible with I/O module configuration.\" />\n"	"\n"	"<event name=\"EN_BLADE_B_INSTALLED\" hex=\"0E00200B\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 11 was installed.\" />\n"	"\n"	"<event name=\"EN_FAULT_PS1_DC_GOOD\" hex=\"08028001\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 1 DC Good Fault\" />\n"	"\n"	"<event name=\"EN_IO_2_5V_WARNING_LOW\" hex=\"0A030C00\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"IO Board 2.5V under recommended voltage.\" />\n"	"\n"	"<event name=\"EN_FAULT_PS2_EPOW\" hex=\"08180002\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Input Voltage Removed from Power Supply 2\" />\n"	"\n"	"<event name=\"EN_BLADE_8_COMM_FAIL\" hex=\"0E008008\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"SP Communications Failure on Blade 8.\" />\n"	"\n"	"<event name=\"EN_PFA_LO_FAULT_12V_PLANAR\" hex=\"06037800\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System under recommended voltage for +12v._HPIDUP1\" />\n"	"\n"	"<event name=\"EN_THERM_TRIP_CPU4\" hex=\"0421D084\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"CPU 4 Over Temperature\" />\n"	"\n"	"<event name=\"EN_PFA_HI_FAULT_12V_PLANAR\" hex=\"FF037500\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"1\"\n"	"       msg=\"System over recommended voltage for +12v.\" />\n"	"\n"	"<event name=\"EN_PFA_HI_FAULT_3_35V\" hex=\"FF033480\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"1\"\n"	"       msg=\"System over recommended voltage on +3.3v.\" />\n"	"\n"	"<event name=\"EN_FAN4_PFA\" hex=\"000A6004\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Blower 4 Outside Recommended Speed.\" />\n"	"\n"	"<event name=\"EN_BLADE_D_COMM_FAIL\" hex=\"0E00800D\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"SP Communications Failure on Blade 13.\" />\n"	"\n"	"<event name=\"EN_PFA_LO_FAULT_3_35V\" hex=\"08033880\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System under recommended voltage on +3.3v._HPIDUP1\" />\n"	"\n"	"<event name=\"EN_SWITCH_1_INSTALLED\" hex=\"0EA02001\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 1 was installed.\" />\n"	"\n"	"<event name=\"EN_SWITCH_3_CFG_ERROR\" hex=\"0EA0C003\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 3 is incompatible with Blade Server configuration. Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_OVER_TEMP_WARN_SWITCH_1\" hex=\"0EA1D401\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 1 Temperature Warning Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_SWITCH_4_CFG_ERROR\" hex=\"0EA0C004\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 4 is incompatible with Blade Server configuration.\" />\n"	"\n"	"<event name=\"EN_CUTOFF_HI_FAULT_N5V\" hex=\"0803C480\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System shutoff due to -5v over voltage.\" />\n"	"\n"	"<event name=\"EN_OVER_TEMP_SWITCH_4\" hex=\"0EA1C404\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 4 Temperature Fault\" />\n"	"\n"	"<event name=\"EN_SWITCH_4_POWERED_OFF\" hex=\"0EA06004\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 4 was instructed to power off.\" />\n"	"\n"	"<event name=\"EN_BLADE_3_INSTALLED\" hex=\"0E002003\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 3 was installed.\" />\n"	"\n"	"<event name=\"EN_BLADE_C_COMM_FAIL\" hex=\"0E00800C\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"SP Communications Failure on Blade 12.\" />\n"	"\n"	"<event name=\"EN_PROC_HOT_CPU1\" hex=\"0421C401\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"CPU 1 shut off due to over temperature\" />\n"	"\n"	"<event name=\"EN_BLADE_6_INSTALLED\" hex=\"0E002006\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 6 was installed.\" />\n"	"\n"	"<event name=\"EN_BLADE_E_REMOVED\" hex=\"0E00400E\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 14 was removed.\" />\n"	"\n"	"<event name=\"EN_SWITCH_4_INSTALLED\" hex=\"0EA02004\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 4 was installed.\" />\n"	"\n"	"<event name=\"EN_BLADE_A_COMM_FAIL\" hex=\"0E00800A\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"SP Communications Failure on Blade 10.\" />\n"	"\n"	"<event name=\"EN_FAN1_SPEED\" hex=\"00026801\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Blower 1 Failure Single blower failure\" />\n"	"\n"	"<event name=\"EN_FAULT_PS1_12V_OVR_CUR\" hex=\"08236001\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 1 12V Over Current Fault\" />\n"	"\n"	"<event name=\"EN_BLADE_1_COMM_FAIL\" hex=\"0E008001\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"SP Communications Failure on Blade 1.\" />\n"	"\n"	"<event name=\"EN_CUTOFF_LO_FAULT_2_5V\" hex=\"08030880\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System shutoff due to +2.5v under voltage.\" />\n"	"\n"	"<event name=\"EN_BLADE_7_CFG_FAIL\" hex=\"0E006007\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 7 is incompatible with I/O module configuration.\" />\n"	"\n"	"<event name=\"EN_OVER_CURRENT_SWITCH_2\" hex=\"0EA1A402\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 2 Current Fault\" />\n"	"\n"	"<event name=\"EN_BLADE_7_INSTALLED\" hex=\"0E002007\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"Blade Server 7 was installed.\" />\n"	"\n"	"<event name=\"EN_SWITCH_2_POST_TIMEOUT\" hex=\"0EA0D002\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 2 POST Timeout. Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_BUST_2_5V_WARNING_LOW\" hex=\"0E830802\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV | OVR_EXP\" dup=\"0\"\n"	"       msg=\"BSE +2.5V under recommended voltage.\" />\n"	"\n"	"<event name=\"EN_FAULT_PS3_OVR_TEMP\" hex=\"0821C083\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 3 Temperature Fault\" />\n"	"\n"	"<event name=\"EN_OVER_TEMP_SWITCH_3\" hex=\"0EA1C403\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 3 Temperature Fault\" />\n"	"\n"	"<event name=\"EN_SWITCH_1_POWERED_OFF\" hex=\"0EA06001\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 1 was instructed to power off.\" />\n"	"\n"	"<event name=\"EN_SWITCH_4_POST_ERROR\" hex=\"0EA0E004\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 4 POST Error. Multiple I/O module failures\" />\n"	"\n"	"<event name=\"EN_SWITCH_4_POWERED_ON\" hex=\"0EA08004\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"I/O module 4 was instructed to power on.\" />\n"	"\n"	"<event name=\"EN_CUTOFF_HI_FAULT_12V_PLANAR\" hex=\"06036480\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System shutoff due to +12v over voltage.\" />\n"	"\n"	"<event name=\"EN_PFA_HI_FAULT_1_8V\" hex=\"0807B400\" type=\"ALL\"\n"	"       severity=\"SAHPI_MAJOR\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System is over recommended voltage for 1.8V CPU\" />\n"	"\n"	"<event name=\"EN_FAULT_PS4_12V_UNDER\" hex=\"08236804\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 4 12V Under Voltage Fault\" />\n"	"\n"	"<event name=\"EN_FAULT_FAN1\" hex=\"0A026001\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Blower 1 Fault Single blower failure\" />\n"	"\n"	"<event name=\"EN_PS2_INSTALLED\" hex=\"08216002\" type=\"ALL\"\n"	"       severity=\"SAHPI_INFORMATIONAL\" override=\"OVR_SEV | OVR_RID\" dup=\"0\"\n"	"       msg=\"Power Supply 2 was installed.\" />\n"	"\n"	"<event name=\"EN_BLADE_E_COMM_FAIL\" hex=\"0E00800E\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"SP Communications Failure on Blade 14.\" />\n"	"\n"	"<event name=\"EN_CUTOFF_LO_FAULT_1_8V\" hex=\"0807A880\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"System shutoff due to 1.8V CPU under voltage\" />\n"	"\n"	"<event name=\"EN_BLADE_4_COMM_FAIL\" hex=\"0E008004\" type=\"ALL\"\n"	"       severity=\"SAHPI_CRITICAL\" override=\"OVR_SEV\" dup=\"0\"\n"	"       msg=\"SP Communications Failure on Blade 4.\" />\n"
⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -