rsa_resources.c

HIP 硬件设备管理标准接口

				.TholdCapabilities = SAHPI_STC_INTERPRETED,
				.ReadThold = SAHPI_STM_LOW_MAJOR | SAHPI_STM_UP_MAJOR |
				             SAHPI_STM_LOW_HYSTERESIS | SAHPI_STM_UP_HYSTERESIS,
				.FixedThold = SAHPI_STM_LOW_MAJOR | SAHPI_STM_UP_MAJOR |
				              SAHPI_STM_LOW_HYSTERESIS | SAHPI_STM_UP_HYSTERESIS,
                        },
                        .Oem = 0
                },
		.rsa_sensor_info = {
			.cur_state = SAHPI_ES_UNSPECIFIED,
			.mib = {
				.not_avail_indicator_num = 0,
				.write_only = 0,
				.convert_snmpstr = SAHPI_SENSOR_INTERPRETED_TYPE_FLOAT32,
				.oid = ".1.3.6.1.4.1.2.3.51.1.2.2.1.1.0",
				.threshold_oids = {
					.InterpretedThresholds = {
						.OidLowMajor     = ".1.3.6.1.4.1.2.3.51.1.2.20.2.1.1.10.1",
						.OidUpMajor      = ".1.3.6.1.4.1.2.3.51.1.2.20.2.1.1.6.1",
					},
				},
			},
			.event_array = {
				{
                                        .event = "06035500", /* EN_PFA_HI_FAULT_PLANAR_5V */
					.event_state = SAHPI_ES_UPPER_MAJOR,
					.recovery_state = SAHPI_ES_UNSPECIFIED,
				},
				{
					.event = "06034480", /* EN_CUTOFF_HI_FAULT_PLANAR_5V */
					.event_state = SAHPI_ES_UPPER_CRIT,
					.recovery_state = SAHPI_ES_UPPER_MAJOR | SAHPI_ES_UPPER_MINOR,
				},
				{
					.event = "06035800", /* EN_PFA_LO_FAULT_PLANAR_5V */
					.event_state = SAHPI_ES_LOWER_MAJOR,
					.recovery_state = SAHPI_ES_UNSPECIFIED,
				},
				{
					.event = "06034800", /* EN_CUTOFF_LO_FAULT_PLANAR_5V */
					.event_state = SAHPI_ES_LOWER_CRIT,
					.recovery_state = SAHPI_ES_LOWER_MAJOR | SAHPI_ES_LOWER_MINOR,
				},
				{},
			},
		},
                .comment = "Plus 5 Volt power supply voltage reading expressed in volts(V)"
        },
        /* 3.3V voltage sensor on Chassis */
        {
                .sensor = {
                        .Num = 8,
                        .Type = SAHPI_VOLTAGE,
                        .Category = SAHPI_EC_THRESHOLD,
                        .EventCtrl = SAHPI_SEC_GLOBAL_DISABLE,
                        .Events = SAHPI_ES_LOWER_MAJOR | SAHPI_ES_LOWER_CRIT |
				  SAHPI_ES_UPPER_MINOR | SAHPI_ES_UPPER_CRIT,
                        .Ignore = SAHPI_FALSE,
                        .DataFormat = {
                                .ReadingFormats = SAHPI_SRF_INTERPRETED,
                                .IsNumeric = SAHPI_TRUE,
                                .SignFormat = SAHPI_SDF_UNSIGNED,
                                .BaseUnits = SAHPI_SU_VOLTS,
                                .ModifierUnits = SAHPI_SU_UNSPECIFIED,
                                .ModifierUse = SAHPI_SMUU_NONE,
                                .FactorsStatic = SAHPI_TRUE,
                                .Factors = {
                                        .Linearization = SAHPI_SL_LINEAR,
                                },
                                .Percentage = SAHPI_FALSE,
                                .Range = {
					.Flags = SAHPI_SRF_MAX | SAHPI_SRF_MIN,
					.Max = {
						.ValuesPresent = SAHPI_SRF_INTERPRETED,
						.Interpreted = {
							.Type = SAHPI_SENSOR_INTERPRETED_TYPE_FLOAT32,
							.Value = {
								.SensorFloat32 = 3.5,
							}	
						},
					},
					.Min = {
						.ValuesPresent = SAHPI_SRF_INTERPRETED,
						.Interpreted = {
							.Type = SAHPI_SENSOR_INTERPRETED_TYPE_FLOAT32,
							.Value = {
								.SensorFloat32 = 0,
							}	
						},
					},
				},
                        },
                        .ThresholdDefn = {
                                .IsThreshold = SAHPI_TRUE,
				.TholdCapabilities = SAHPI_STC_INTERPRETED,
				.ReadThold = SAHPI_STM_LOW_MAJOR | SAHPI_STM_UP_MAJOR |
				             SAHPI_STM_LOW_HYSTERESIS | SAHPI_STM_UP_HYSTERESIS,
				.FixedThold = SAHPI_STM_LOW_MAJOR | SAHPI_STM_UP_MAJOR |
				              SAHPI_STM_LOW_HYSTERESIS | SAHPI_STM_UP_HYSTERESIS,
                        },
                        .Oem = 0
                },
		.rsa_sensor_info = {
			.cur_state = SAHPI_ES_UNSPECIFIED,
			.mib = {
				.not_avail_indicator_num = 0,
				.write_only = 0,
				.convert_snmpstr = SAHPI_SENSOR_INTERPRETED_TYPE_FLOAT32,
				.oid = ".1.3.6.1.4.1.2.3.51.1.2.2.1.2.0",
				.threshold_oids = {
					.InterpretedThresholds = {
						.OidLowMajor     = ".1.3.6.1.4.1.2.3.51.1.2.20.2.1.1.10.2",
						.OidUpMajor      = ".1.3.6.1.4.1.2.3.51.1.2.20.2.1.1.6.2",
					},
				},
			},
			.event_array = {
				{
                                        .event = "08033480", /* EN_PFA_HI_FAULT_3_35V */
					.event_state = SAHPI_ES_UPPER_MAJOR,
					.recovery_state = SAHPI_ES_UNSPECIFIED,
				},
				{
					.event = "08032480", /* EN_CUTOFF_HI_FAULT_3_35V */
					.event_state = SAHPI_ES_UPPER_CRIT,
					.recovery_state = SAHPI_ES_UPPER_MAJOR | SAHPI_ES_UPPER_MINOR,
				},
				{
					.event = "08033880", /* EN_PFA_LO_FAULT_3_35V */
					.event_state = SAHPI_ES_LOWER_MAJOR,
					.recovery_state = SAHPI_ES_UNSPECIFIED,
				},
				{
					.event = "08032880", /* EN_CUTOFF_LO_FAULT_3_35V */
					.event_state = SAHPI_ES_LOWER_CRIT,
					.recovery_state = SAHPI_ES_LOWER_MAJOR | SAHPI_ES_LOWER_MINOR,
				},
				{},
			},
		},
                .comment = "Plus 3.3 Volt power supply voltage reading expressed in volts(V)"
        },
        /* 12V voltage sensor on Chassis */
        {
                .sensor = {
                        .Num = 9,
                        .Type = SAHPI_VOLTAGE,
                        .Category = SAHPI_EC_THRESHOLD,
                        .EventCtrl = SAHPI_SEC_GLOBAL_DISABLE,
                        .Events = SAHPI_ES_LOWER_MAJOR | SAHPI_ES_LOWER_CRIT |
				  SAHPI_ES_UPPER_MINOR | SAHPI_ES_UPPER_CRIT,
                        .Ignore = SAHPI_FALSE,
                        .DataFormat = {
                                .ReadingFormats = SAHPI_SRF_INTERPRETED,
                                .IsNumeric = SAHPI_TRUE,
                                .SignFormat = SAHPI_SDF_UNSIGNED,
                                .BaseUnits = SAHPI_SU_VOLTS,
                                .ModifierUnits = SAHPI_SU_UNSPECIFIED,
                                .ModifierUse = SAHPI_SMUU_NONE,
                                .FactorsStatic = SAHPI_TRUE,
                                .Factors = {
                                        .Linearization = SAHPI_SL_LINEAR,
                                },
                                .Percentage = SAHPI_FALSE,
                                .Range = {
					.Flags = SAHPI_SRF_MAX | SAHPI_SRF_MIN,
					.Max = {
						.ValuesPresent = SAHPI_SRF_INTERPRETED,
						.Interpreted = {
							.Type = SAHPI_SENSOR_INTERPRETED_TYPE_FLOAT32,
							.Value = {
								.SensorFloat32 = 16,
							}	
						},
					},
					.Min = {
						.ValuesPresent = SAHPI_SRF_INTERPRETED,
						.Interpreted = {
							.Type = SAHPI_SENSOR_INTERPRETED_TYPE_FLOAT32,
							.Value = {
								.SensorFloat32 = 0,
							}	
						},
					},
				},
                        },
                        .ThresholdDefn = {
                                .IsThreshold = SAHPI_TRUE,
				.TholdCapabilities = SAHPI_STC_INTERPRETED,
				.ReadThold = SAHPI_STM_LOW_MAJOR | SAHPI_STM_UP_MAJOR |
				             SAHPI_STM_LOW_HYSTERESIS | SAHPI_STM_UP_HYSTERESIS,
				.FixedThold = SAHPI_STM_LOW_MAJOR | SAHPI_STM_UP_MAJOR |
				              SAHPI_STM_LOW_HYSTERESIS | SAHPI_STM_UP_HYSTERESIS,
                        },
                        .Oem = 0
                },
		.rsa_sensor_info = {
			.cur_state = SAHPI_ES_UNSPECIFIED,
			.mib = {
				.not_avail_indicator_num = 0,
				.write_only = 0,
				.convert_snmpstr = SAHPI_SENSOR_INTERPRETED_TYPE_FLOAT32,
				.oid = ".1.3.6.1.4.1.2.3.51.1.2.2.1.3.0",
				.threshold_oids = {
					.InterpretedThresholds = {
						.OidLowMajor     = ".1.3.6.1.4.1.2.3.51.1.2.20.2.1.1.10.3",
						.OidUpMajor      = ".1.3.6.1.4.1.2.3.51.1.2.20.2.1.1.6.3",
					},
				},
			},
			.event_array = {
				{
                                        .event = "06037500", /* EN_PFA_HI_FAULT_12V_PLANAR */
			                .event_state = SAHPI_ES_UPPER_MAJOR,
					.recovery_state = SAHPI_ES_UNSPECIFIED,
		                },
		                {
			                .event = "06036480", /* EN_CUTOFF_HI_FAULT_12V_PLANAR */
					.event_state = SAHPI_ES_UPPER_CRIT,
					.recovery_state = SAHPI_ES_UPPER_MAJOR | SAHPI_ES_UPPER_MINOR,
				},
				{
					.event = "06037800", /* EN_PFA_LO_FAULT_12V_PLANAR */
					.event_state = SAHPI_ES_LOWER_MAJOR,
					.recovery_state = SAHPI_ES_UNSPECIFIED,
				},
				{
					.event = "06036800", /* EN_CUTOFF_LO_FAULT_12V_PLANAR */
					.event_state = SAHPI_ES_LOWER_CRIT,
					.recovery_state = SAHPI_ES_LOWER_MAJOR | SAHPI_ES_LOWER_MINOR,
				},
				{},
			},
		},
                .comment = "Plus 12 Volt power supply voltage reading expressed in volts(V)"
        },
        /* -12V voltage sensor on Chassis */
        {
                .sensor = {
                        .Num = 10,
                        .Type = SAHPI_VOLTAGE,
                        .Category = SAHPI_EC_THRESHOLD,
                        .EventCtrl = SAHPI_SEC_GLOBAL_DISABLE,
                        .Events = SAHPI_ES_LOWER_MAJOR | SAHPI_ES_LOWER_CRIT |
				  SAHPI_ES_UPPER_MINOR | SAHPI_ES_UPPER_CRIT,
                        .Ignore = SAHPI_FALSE,
                        .DataFormat = {
                                .ReadingFormats = SAHPI_SRF_INTERPRETED,
                                .IsNumeric = SAHPI_TRUE,
                                .SignFormat = SAHPI_SDF_UNSIGNED,
                                .BaseUnits = SAHPI_SU_VOLTS,
                                .ModifierUnits = SAHPI_SU_UNSPECIFIED,
                                .ModifierUse = SAHPI_SMUU_NONE,
                                .FactorsStatic = SAHPI_TRUE,
                                .Factors = {
                                        .Linearization = SAHPI_SL_LINEAR,
                                },
                                .Percentage = SAHPI_FALSE,
                                .Range = {
					.Flags = SAHPI_SRF_MAX | SAHPI_SRF_MIN,
					.Max = {
						.ValuesPresent = SAHPI_SRF_INTERPRETED,
						.Interpreted = {
							.Type = SAHPI_SENSOR_INTERPRETED_TYPE_FLOAT32,
							.Value = {
								.SensorFloat32 = 16,
							}	
						},
					},
					.Min = {
						.ValuesPresent = SAHPI_SRF_INTERPRETED,
						.Interpreted = {
							.Type = SAHPI_SENSOR_INTERPRETED_TYPE_FLOAT32,
							.Value = {
								.SensorFloat32 = 0,
							}	
						},
					},
				},
                        },
                        .ThresholdDefn = {
                                .IsThreshold = SAHPI_TRUE,
				.TholdCapabilities = SAHPI_STC_INTERPRETED,
				.ReadThold = SAHPI_STM_LOW_MAJOR | SAHPI_STM_UP_MAJOR |
				             SAHPI_STM_LOW_HYSTERESIS | SAHPI_STM_UP_HYSTERESIS,
				.FixedThold = SAHPI_STM_LOW_MAJOR | SAHPI_STM_UP_MAJOR |
				              SAHPI_STM_LOW_HYSTERESIS | SAHPI_STM_UP_HYSTERESIS,
                        },
                        .Oem = 0
                },
		.rsa_sensor_info = {
			.cur_state = SAHPI_ES_UNSPECIFIED,
			.mib = {
				.not_avail_indicator_num = 0,
				.write_only = 0,
				.convert_snmpstr = SAHPI_SENSOR_INTERPRETED_TYPE_FLOAT32,
				.oid = ".1.3.6.1.4.1.2.3.51.1.2.2.1.4.0",
				.threshold_oids = {
					.InterpretedThresholds = {
						.OidLowMajor     = ".1.3.6.1.4.1.2.3.51.1.2.20.2.1.1.10.4",
						.OidUpMajor      = ".1.3.6.1.4.1.2.3.51.1.2.20.2.1.1.6.4",
					},
				},
			},
			.event_array = {
				{
					.event = "0803F500", /* EN_PFA_HI_FAULT_N12V */
					.event_state = SAHPI_ES_UPPER_MAJOR,
					.recovery_state = SAHPI_ES_UNSPECIFIED,
				},
				{
					.event = "0803E480", /* EN_CUTOFF_HI_FAULT_N12V */
					.event_state = SAHPI_ES_UPPER_CRIT,
					.recovery_state = SAHPI_ES_UPPER_MAJOR | SAHPI_ES_UPPER_MINOR,
				},
				{
					.event = "0803F800", /* EN_PFA_LO_FAULT_N12V */
					.event_state = SAHPI_ES_LOWER_MAJOR,
					.recovery_state = SAHPI_ES_UNSPECIFIED,
				},
				{
					.event = "0803E800", /* EN_CUTOFF_LO_FAULT_N12V */
					.event_state = SAHPI_ES_LOWER_CRIT,
					.recovery_state = SAHPI_ES_LOWER_MAJOR | SAHPI_ES_LOWER_MINOR,
				},
				{},
			},
		},
                .comment = "Plus -12 Volt power supply voltage reading expressed in volts(V)"
        },
        /* -5V voltage sensor on Chassis */
        {
                .sensor = {
                        .Num = 11,
                        .Type = SAHPI_VOLTAGE,
                        .Category = SAHPI_EC_THRESHOLD,
                        .EventCtrl = SAHPI_SEC_GLOBAL_DISABLE,
                        .Events = SAHPI_ES_LOWER_MAJOR | SAHPI_ES_LOWER_CRIT |
				  SAHPI_ES_UPPER_MINOR | SAHPI_ES_UPPER_CRIT,
                        .Ignore = SAHPI_FALSE,
                        .DataFormat = {
                                .ReadingFormats = SAHPI_SRF_INTERPRETED,
                                .IsNumeric = SAHPI_TRUE,
                                .SignFormat = SAHPI_SDF_UNSIGNED,
                                .BaseUnits = SAHPI_SU_VOLTS,