test_mcp2510.c

arm9.rar

/****************************************************************************
【文  件  名  称】Test_MCP2510.C
【功  能  描  述】三星S3C2410A板demo程序代码
【程  序  版  本】4.0
【创建人及创建日期】icesoar//2002年11月19日19:26
【修改人及修改日期】icesoar//2004-12-8 17:25
****************************************************************************/

//***************************************************************************
#include "def.h"
#include "2410addr.h"
#include "config.h"
#include "board.h"
#include "utils.h"
#include "MCP2510.h"

/****************************************************************************
MCP2510_CS		GPE11		output
MCP2510_SI		GPB5		output
MCP2510_SO		GPB6		input
MCP2510_SCK		GPB7		output
MCP2510_INT		GPG0		input		(EINT8)
****************************************************************************/
#define MCP2510_DEBUG    0
#define DELAY_TIME		100
#define MCP2510_CS_OUT		( rGPECON = rGPECON & (~(3<<22)) | (1<<22) )		//GPE11
#define MCP2510_CS_H		rGPEDAT = rGPEDAT | (1<<11)
#define MCP2510_CS_L		rGPEDAT = rGPEDAT & (~(1<<11))

#define MCP2510_SI_OUT		( rGPBCON = rGPBCON & (~(3<<10)) | (1<<10) )		//GPB5
#define MCP2510_SI_H		rGPBDAT = rGPBDAT | (1<<5)
#define MCP2510_SI_L		rGPBDAT = rGPBDAT & (~(1<<5))

#define MCP2510_SCK_OUT		( rGPBCON = rGPBCON & (~(3<<14)) | (1<<14) )		//GPB7
#define MCP2510_SCK_H		rGPBDAT = rGPBDAT | (1<<7)
#define MCP2510_SCK_L		rGPBDAT = rGPBDAT & (~(1<<7))

#define MCP2510_SO_IN		( rGPBCON = rGPBCON & (~(3<<12)) | (0<<12) )		//GPB6
#define MCP2510_SO_GET		( rGPBDAT & 0x40 )	

#define MCP2510_INT_IN		( rGPGCON = rGPGCON & (~(3<<0)) )
#define MCP2510_INT_GET		( rGPGDAT & 0x01 )	
/********************** MCP2510 Instruction *********************************/
#define MCP2510INSTR_RESET		0xc0
#define MCP2510INSTR_READ		0x03
#define MCP2510INSTR_WRITE		0x02
#define MCP2510INSTR_RTS		0x80	//request to send
#define MCP2510INSTR_RDSTAT	0xa0	//read status
#define MCP2510INSTR_BITMDFY	0x05	//bit modify
//***************************************************************************

/****************************************************************************
【功能说明】
****************************************************************************/
void MCP2510_IO_CS_Init( void ) 
{
   MCP2510_CS_OUT ;
   MCP2510_SI_OUT ;
   MCP2510_SCK_OUT ;
   MCP2510_SO_IN ;
   MCP2510_SCK_H ;		//SCK put 1
   { U16 k=0; for( ; k <= DELAY_TIME; k++ ) ;  }  //延时至少300ns
   MCP2510_CS_L ;			// Select the MCP2510
   { U16 k=0; for( ; k <= DELAY_TIME; k++ ) ;  }  //延时至少300ns
}

/****************************************************************************
【功能说明】
****************************************************************************/
void Spi_Write( U8 Data ) 
{
	U8 m ;

	for( m = 0; m < 8; m++ )
	{
		MCP2510_SCK_L ;		//SCK put 0
		{ U16 k=0; for( ; k <= DELAY_TIME; k++ ) ;  }  //延时至少300ns
		if( (Data&0x80)==0x80 )
			MCP2510_SI_H;		//SI put 1
		else
			MCP2510_SI_L;		//SI put 0

		{ U16 k=0; for( ; k <= DELAY_TIME; k++ ) ;  }  //延时至少300ns
		MCP2510_SCK_H ;		//SCK put 1
		Data = Data<<1 ;
		{ U16 k=0; for( ; k <= DELAY_TIME; k++ ) ;  }  //延时至少300ns
	}
}

/****************************************************************************
【功能说明】
****************************************************************************/
U8 Spi_Read( )
{
	U8 m ;
	U8 data = 0 ;

	for( m = 0; m < 8; m++ )
	{
		MCP2510_SCK_L ;		//SCK put 0
		{ U16 k=0; for( ; k <= DELAY_TIME; k++ ) ;  }  //延时至少300ns
		data=data<<1;
		if( MCP2510_SO_GET != 0 )
			data |= 0x01 ;
		else
			data &= 0xfe;

		{ U16 k=0; for( ; k <= DELAY_TIME; k++ ) ;  }  //延时至少300ns
		MCP2510_SCK_H ;		//SCK put 1
		{ U16 k=0; for( ; k <= DELAY_TIME; k++ ) ;  }  //延时至少300ns
	}

	return (data);
}

/****************************************************************************
【功能说明】 Send Command to MCP2510 via SPI 
****************************************************************************/
void SendCMDMCP2510( U8 CMD )
{
   MCP2510_IO_CS_Init() ;		//Initial IO port and CS is select
   Spi_Write(CMD );
   MCP2510_CS_H ;			// Deselect the MCP2510
}

/****************************************************************************
【功能说明】
****************************************************************************/
void MCP2510_Reset()
{
	MCP2510_IO_CS_Init() ;

	Spi_Write(MCP2510INSTR_RESET);

	MCP2510_CS_H ;
}

/****************************************************************************
【功能说明】
****************************************************************************/
void MCP2510_Write(int address, int value)
{
	MCP2510_IO_CS_Init() ;

	Spi_Write(MCP2510INSTR_WRITE);
	Spi_Write((unsigned char)address);
	Spi_Write((unsigned char)value);

	MCP2510_CS_H ;
}

/****************************************************************************
【功能说明】
****************************************************************************/
unsigned char MCP2510_Read(int address)
{
	unsigned char result;

	MCP2510_IO_CS_Init() ;

	Spi_Write(MCP2510INSTR_READ);
	Spi_Write((unsigned char)address);

	Spi_Write(0);
	result=Spi_Read();

	MCP2510_CS_H ;

	return result;
}

/****************************************************************************
【功能说明】              Read often used status
//Status 	 7    	6    	5    	4    	3    	2  	1	0
//		|	|	|	|	|	|	|	|									
//		|	|	|	|	|	|	|	|___CANINTF.RX0IF
//		|	|	|	|	|	|	|_______CANINTF.RX1IF
//		|	|	|	|	|	|___________TXB0CTRL.TXREQ
//		|	|	|	|	|_______________CANINTF.TX0IF
//		|	|	|	|___________________TXB1CTRL.TXREQ
//		|	|	|_______________________CANINTF.TX1IF
//		|	|___________________________TXB2CTRL.TXREQ
//		|_______________________________CANINTF.TX2IF
****************************************************************************/
unsigned char MCP2510_ReadStatus()
{
	unsigned char result;

	MCP2510_IO_CS_Init() ;

	Spi_Write(MCP2510INSTR_RDSTAT);

	Spi_Write(0);
	result=Spi_Read();

	MCP2510_CS_H ;

	if( MCP2510_DEBUG )		printf( "StatusREG = 0x%x\n", result ) ;
	return result;
}

/****************************************************************************
【功能说明】
****************************************************************************/
void MCP2510_WriteBits( int address, int data, int mask )
{
	MCP2510_IO_CS_Init() ;

	Spi_Write(MCP2510INSTR_BITMDFY);
	Spi_Write((unsigned char)address);
	Spi_Write((unsigned char)mask);
	Spi_Write((unsigned char)data);

	MCP2510_CS_H ;
}

/****************************************************************************
【功能说明】
****************************************************************************/
void MCP2510_SetBandRate(CanBandRate bandrate, int IsBackNormal)
{
	//
	// Bit rate calculations.
	//
	//Input clock fre=16MHz
	// In this case, we'll use a speed of 125 kbit/s, 250 kbit/s, 500 kbit/s.
	// If we set the length of the propagation segment to 7 bit time quanta,
	// and we set both the phase segments to 4 quanta each,
	// one bit will be 1+7+4+4 = 16 quanta in length.
	//
	// setting the prescaler (BRP) to 0 => 500 kbit/s.
	// setting the prescaler (BRP) to 1 => 250 kbit/s.
	// setting the prescaler (BRP) to 3 => 125 kbit/s.
	//
	// If we set the length of the propagation segment to 3 bit time quanta,
	// and we set both the phase segments to 1 quanta each,
	// one bit will be 1+3+2+2 = 8 quanta in length.
	// setting the prescaler (BRP) to 0 => 1 Mbit/s.

	// Go into configuration mode
	MCP2510_Write(MCP2510REG_CANCTRL, MODE_CONFIG);

	switch(bandrate){
	case BandRate_125kbps:
		MCP2510_Write(CNF1, SJW1|BRP4);	//Synchronization Jump Width Length =1 TQ
		MCP2510_Write(CNF2, BTLMODE_CNF3|(SEG4<<3)|SEG7); // Phase Seg 1 = 4, Prop Seg = 7
		MCP2510_Write(CNF3, SEG4);// Phase Seg 2 = 4
		break;
	case BandRate_250kbps:
		MCP2510_Write(CNF1, SJW1|BRP2);	//Synchronization Jump Width Length =1 TQ
		MCP2510_Write(CNF2, BTLMODE_CNF3|(SEG4<<3)|SEG7); // Phase Seg 1 = 4, Prop Seg = 7
		MCP2510_Write(CNF3, SEG4);// Phase Seg 2 = 4
		break;
	case BandRate_500kbps:
		MCP2510_Write(CNF1, SJW1|BRP1);	//Synchronization Jump Width Length =1 TQ
		MCP2510_Write(CNF2, BTLMODE_CNF3|(SEG4<<3)|SEG7); // Phase Seg 1 = 4, Prop Seg = 7
		MCP2510_Write(CNF3, SEG4);// Phase Seg 2 = 4
		break;
	case BandRate_1Mbps:
		MCP2510_Write(CNF1, SJW1|BRP1);	//Synchronization Jump Width Length =1 TQ
		MCP2510_Write(CNF2, BTLMODE_CNF3|(SEG3<<3)|SEG2); // Phase Seg 1 = 2, Prop Seg = 3
		MCP2510_Write(CNF3, SEG2);// Phase Seg 2 = 1
		break;
	}

	if(IsBackNormal){
		//Enable clock output
		MCP2510_Write(CLKCTRL, MODE_NORMAL | CLKEN | CLK1);
	}
}


/*******************************************\
*	序列读取MCP2510数据				*
\*******************************************/
void MCP2510_SRead( int address, unsigned char* pdata, int nlength )
{
	int i;

	MCP2510_IO_CS_Init() ;
	Spi_Write(MCP2510INSTR_READ);
	Spi_Write((unsigned char)address);

	for (i=0; i<nlength; i++) {
		Spi_Write(0);
		*pdata=Spi_Read();
		pdata++;
	}
	MCP2510_CS_H ;
}


/*******************************************\
*	序列写入MCP2510数据				*
\*******************************************/
void MCP2510_Swrite(int address, unsigned char* pdata, int nlength)
{
	int i;
	MCP2510_IO_CS_Init() ;

	Spi_Write(MCP2510INSTR_WRITE);
	Spi_Write((unsigned char)address);

	for (i=0; i < nlength; i++) {
		Spi_Write((unsigned char)*pdata);
		pdata++;
	}
	MCP2510_CS_H ;