timeint.h

mgcp协议源代码。支持多种编码：g711

/*
 * timeint.h
 *
 * Millisecond resolution time interval class (uses 64 bit integers).
 *
 * Portable Windows Library
 *
 * Copyright (c) 1993-1998 Equivalence Pty. Ltd.
 *
 * The contents of this file are subject to the Mozilla Public License
 * Version 1.0 (the "License"); you may not use this file except in
 * compliance with the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS"
 * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
 * the License for the specific language governing rights and limitations
 * under the License.
 *
 * The Original Code is Portable Windows Library.
 *
 * The Initial Developer of the Original Code is Equivalence Pty. Ltd.
 *
 * Portions are Copyright (C) 1993 Free Software Foundation, Inc.
 * All Rights Reserved.
 *
 * Contributor(s): ______________________________________.
 *
 * $Log: timeint.h,v $
 * Revision 1.21  2000/03/06 04:09:23  robertj
 * Added constructor to do PString conversion to PTimeInterval
 *
 * Revision 1.20  1999/07/06 04:46:00  robertj
 * Fixed being able to case an unsigned to a PTimeInterval.
 * Improved resolution of PTimer::Tick() to be millisecond accurate.
 *
 * Revision 1.19  1999/03/09 02:59:51  robertj
 * Changed comments to doc++ compatible documentation.
 *
 * Revision 1.18  1999/02/16 08:11:17  robertj
 * MSVC 6.0 compatibility changes.
 *
 * Revision 1.17  1998/09/23 06:21:43  robertj
 * Added open source copyright license.
 *
 * Revision 1.16  1998/01/26 00:49:53  robertj
 * Added multiply and divide operators to PTimeInterval.
 *
 * Revision 1.15  1996/05/15 10:19:29  robertj
 * Changed millisecond access functions to get 64 bit integer.
 *
 * Revision 1.14  1996/05/09 12:22:09  robertj
 * Resolved C++ problems with 64 bit PTimeInterval for Mac platform.
 *
 * Revision 1.13  1996/03/17 05:52:02  robertj
 * Changed PTimeInterval to 64 bit integer.
 *
 * Revision 1.12  1995/03/14 12:42:50  robertj
 * Updated documentation to use HTML codes.
 *
 * Revision 1.11  1995/01/18  09:01:32  robertj
 * Documentation.
 *
 * Revision 1.10  1995/01/09  12:29:41  robertj
 * Removed unnecesary return value from I/O functions.
 *
 * Revision 1.9  1994/08/23  11:32:52  robertj
 * Oops
 *
 * Revision 1.8  1994/08/22  00:46:48  robertj
 * Added pragma fro GNU C++ compiler.
 *
 * Revision 1.7  1994/07/02  03:03:49  robertj
 * Timer redesign consequences and ability to compare a time interval against
 * ordinary integer milliseconds.
 *
 * Revision 1.6  1994/06/25  11:55:15  robertj
 * Unix version synchronisation.
 *
 * Revision 1.5  1994/01/03  04:42:23  robertj
 * Mass changes to common container classes and interactors etc etc etc.
 *
 * Revision 1.4  1993/08/31  03:38:02  robertj
 * Added copy constructor and assignement oeprator due to G++ strangeness.
 *
 * Revision 1.3  1993/08/27  18:17:47  robertj
 * Added function to set the interval of a PTieInterval object.
 * Used a common type for number of milliseconds.
 *
 * Revision 1.2  1993/07/14  12:49:16  robertj
 * Fixed RCS keywords.
 *
 */

#define _PTIMEINTERVAL

#ifdef __GNUC__
#pragma interface
#endif


///////////////////////////////////////////////////////////////////////////////
// Difference between two system times

/** This class defines an arbitrary time interval to millisecond accuracy. The
   interval can be both positive and negative.
   
   A long int is used to store the time interval so it is limited to LONG_MAX
   (found in the standard C header file limits.h) milliseconds. This is
   approximately 596 hours for 32 bit integers.
   
   There is a constant, #PMaxTimeInterval# which defines the
   maximum number of milliseconds that a time interval may be.
 */
class PTimeInterval : public PObject
{
  PCLASSINFO(PTimeInterval, PObject);

  public:
  /**@name Construction */
  //@{
    /** Create a new time interval object. The time interval, in milliseconds,
       is the sum of all of the parameters. For example all of the following
       are equivalent:
\begin{verbatim}
              PTimeInterval(120000)
              PTimeInterval(60000, 60)
              PTimeInterval(60000, 0, 1)
              PTimeInterval(0, 60, 1)
              PTimeInterval(0, 0, 2)
\end{verbatim}
     */
    PTimeInterval(
      int milliseconds = 0  /// Number of milliseconds for interval.
    );
    PTimeInterval(
      unsigned millisecs    /// Number of milliseconds for interval.
    );
    PTimeInterval(
      PInt64 mseconds       /// Number of milliseconds for interval.
    );
    PTimeInterval(
      long millisecs,       /// Number of milliseconds for interval.
      long seconds = 0,     /// Number of seconds for interval.
      long minutes = 0,     /// Number of minutes for interval.
      long hours = 0,       /// Number of hours for interval.
      int days = 0          /// Number of days for interval.
    );
    PTimeInterval(
      const PString & str   /// String representation of time interval.
    );
  //@}

  /**@name Overrides from class PObject */
  //@{
    /** Create a new copy of the time interval. It is the responsibility of the
       called to delete the object.
       
       @return
       new time interval on heap.
     */
    PObject * Clone() const;

    /** Rank the two time intervals. This ranks the intervals as you would
       expect for two integers.
       
       @return
       #EqualTo#, #LessThan# or #GreaterThan#
       depending on their relative rank.
     */
    virtual Comparison Compare(
      const PObject & obj   /// Time interval to compare against.
    ) const;

    /** Output the time interval to the I/O stream. This outputs the number of
       milliseconds as a signed decimal integer number.
     */
    virtual void PrintOn(
      ostream & strm    /// I/O stream to output the time interval.
    ) const;

    /** Input the time interval from the I/O stream. This expects the input
       to be a signed decimal integer number.
     */
    virtual void ReadFrom(
      istream & strm    /// I/O stream to input the time interval from.
    );
  //@}

  /**@name Access functions */
  //@{
    /** Get the number of milliseconds for the time interval.
    
       @return
       very long integer number of milliseconds.
     */
    PInt64 GetMilliSeconds() const;

    /** Get the number of whole seconds for the time interval.
    
       @return
       long integer number of seconds.
     */
    long GetSeconds() const;

    /** Get the number of whole minutes for the time interval.
    
       @return
       integer number of minutes.
     */
    long GetMinutes() const;

    /** Get the number of whole hours for the time interval.
    
       @return
       integer number of hours.
     */
    int GetHours() const;

    /** Get the number of whole days for the time interval.
    
       @return
       integer number of days.
     */
    int GetDays() const;

    /** Get the number of milliseconds for the time interval.
    
       @return
       long integer number of milliseconds.
     */
    DWORD GetInterval() const;

    /** Set the value of the time interval. The time interval, in milliseconds,
       is the sum of all of the parameters. For example all of the following
       are equivalent:
\begin{verbatim}
              SetInterval(120000)
              SetInterval(60000, 60)
              SetInterval(60000, 0, 1)
              SetInterval(0, 60, 1)
              SetInterval(0, 0, 2)
\end{verbatim}
     */
    void SetInterval(
      PInt64 milliseconds = 0,  /// Number of milliseconds for interval.
      long seconds = 0,         /// Number of seconds for interval.
      long minutes = 0,         /// Number of minutes for interval.
      long hours = 0,           /// Number of hours for interval.
      int days = 0              /// Number of days for interval.
    );
  //@}

  /**@name Operations */
  //@{
    /** Add the two time intervals yielding a third time interval.
    
       @return
       sum of the time intervals.
     */
    PTimeInterval operator+(
      const PTimeInterval & interval   /// Time interval to add.
    ) const;

    /** Add the second time interval to the first time interval.
    
       @return
       reference to first time interval.
     */
    PTimeInterval & operator+=(
      const PTimeInterval & interval   /// Time interval to add.
    );

    /** Subtract the two time intervals yielding a third time interval.
    
       @return
       difference of the time intervals.
     */
    PTimeInterval operator-(
      const PTimeInterval & interval   /// Time interval to subtract.
    ) const;

    /** Subtract the second time interval from the first time interval.
    
       @return
       reference to first time interval.
     */
    PTimeInterval & operator-=(
      const PTimeInterval & interval   /// Time interval to subtract.
    );

    /** Multiply the time interval by a factor yielding a third time interval.
    
       @return
       the time intervals times the factor.
     */
    PTimeInterval operator*(
      int factor   /// factor to multiply.
    ) const;

    /** Multiply the time interval by a factor.
    
       @return
       reference to time interval.
     */
    PTimeInterval & operator*=(
      int factor   /// factor to multiply.
    );

    /** Divide the time interval by a factor yielding a third time interval.
    
       @return
       the time intervals divided by the factor.
     */
    PTimeInterval operator/(
      int factor   /// factor to divide.
    ) const;

    /** Divide the time interval by a factor.
    
       @return
       reference to time interval.
     */
    PTimeInterval & operator/=(
      int factor   /// factor to divide.
    );
  //@}

  /**@name Comparison functions */
  //@{
    /** Compare to the two time intervals. This is provided as an override to
       the default in PObject so that comparisons can be made to integer
       literals that represent milliseconds.

       @return
       TRUE if intervals are equal.
     */
    BOOL operator==(
      const PTimeInterval & interval   /// Time interval to compare.
    ) const;
    BOOL operator==(
      long msecs    /// Time interval as integer milliseconds to compare.
    ) const;

    /** Compare to the two time intervals. This is provided as an override to
       the default in PObject so that comparisons can be made to integer
       literals that represent milliseconds.

       @return
       TRUE if intervals are not equal.
     */
    BOOL operator!=(
      const PTimeInterval & interval   /// Time interval to compare.
    ) const;
    BOOL operator!=(
      long msecs    /// Time interval as integer milliseconds to compare.
    ) const;

    /** Compare to the two time intervals. This is provided as an override to
       the default in PObject so that comparisons can be made to integer
       literals that represent milliseconds.

       @return
       TRUE if intervals are greater than.
     */
    BOOL operator> (
      const PTimeInterval & interval   /// Time interval to compare.
    ) const;
    BOOL operator> (
      long msecs    /// Time interval as integer milliseconds to compare.
    ) const;

    /** Compare to the two time intervals. This is provided as an override to
       the default in PObject so that comparisons can be made to integer
       literals that represent milliseconds.

       @return
       TRUE if intervals are greater than or equal.
     */
    BOOL operator>=(
      const PTimeInterval & interval   /// Time interval to compare.
    ) const;
    BOOL operator>=(
      long msecs    /// Time interval as integer milliseconds to compare.
    ) const;

    /** Compare to the two time intervals. This is provided as an override to
       the default in PObject so that comparisons can be made to integer
       literals that represent milliseconds.

       @return
       TRUE if intervals are less than.
     */
    BOOL operator< (
      const PTimeInterval & interval   /// Time interval to compare.
    ) const;
    BOOL operator< (
      long msecs    /// Time interval as integer milliseconds to compare.
    ) const;

    /** Compare to the two time intervals. This is provided as an override to
       the default in PObject so that comparisons can be made to integer
       literals that represent milliseconds.

       @return
       TRUE if intervals are less than or equal.
     */
    BOOL operator<=(
      const PTimeInterval & interval   /// Time interval to compare.
    ) const;
    BOOL operator<=(
      long msecs    /// Time interval as integer milliseconds to compare.
    ) const;
  //@}

  protected:
  // Member variables
    /// Number of milliseconds in time interval.
    PInt64 milliseconds;

#ifdef DOC_PLUS_PLUS
};
#endif

// Class declaration continued in platform specific header file ///////////////