apr_file_info.h

Apache V2.0.15 Alpha For Linuxhttpd-2_0_15-alpha.tar.Z

/* ====================================================================
 * The Apache Software License, Version 1.1
 *
 * Copyright (c) 2000-2001 The Apache Software Foundation.  All rights
 * reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * 3. The end-user documentation included with the redistribution,
 *    if any, must include the following acknowledgment:
 *       "This product includes software developed by the
 *        Apache Software Foundation (http://www.apache.org/)."
 *    Alternately, this acknowledgment may appear in the software itself,
 *    if and wherever such third-party acknowledgments normally appear.
 *
 * 4. The names "Apache" and "Apache Software Foundation" must
 *    not be used to endorse or promote products derived from this
 *    software without prior written permission. For written
 *    permission, please contact [e-mail].
 *
 * 5. Products derived from this software may not be called "Apache",
 *    nor may "Apache" appear in their name, without prior written
 *    permission of the Apache Software Foundation.
 *
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED.  IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR
 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 * ====================================================================
 *
 * This software consists of voluntary contributions made by many
 * individuals on behalf of the Apache Software Foundation.  For more
 * information on the Apache Software Foundation, please see
 * <http://www.apache.org/>.
 */

#ifndef APR_FILE_INFO_H
#define APR_FILE_INFO_H

#include "apr.h"
#include "apr_user.h"
#include "apr_pools.h"
#include "apr_time.h"
#include "apr_errno.h"

#if APR_HAVE_SYS_UIO_H
#include <sys/uio.h>
#endif

#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */

/**
 * @package APR File handling
 */

typedef enum {
    APR_NOFILE = 0,     /* the file exists, but APR doesn't know its type */
    APR_REG,            /* a regular file */
    APR_DIR,            /* a directory */
    APR_CHR,            /* a character device */
    APR_BLK,            /* a block device */
    APR_PIPE,           /* a FIFO / pipe */
    APR_LNK,            /* a symbolic link */
    APR_SOCK            /* a [unix domain] socket */
} apr_filetype_e; 

/* Permissions flags */

#define APR_UREAD     0x400 
#define APR_UWRITE    0x200
#define APR_UEXECUTE  0x100

#define APR_GREAD     0x040
#define APR_GWRITE    0x020
#define APR_GEXECUTE  0x010

#define APR_WREAD     0x004
#define APR_WWRITE    0x002
#define APR_WEXECUTE  0x001

#define APR_OS_DEFAULT 0xFFF

/**
 * Structure for referencing directories.
 * @defvar apr_dir_t
 */
typedef struct apr_dir_t          apr_dir_t;
/**
 * Structure for determining file permissions.
 * @defvar apr_fileperms_t
 */
typedef apr_int32_t               apr_fileperms_t;
#ifdef WIN32
/**
 * Structure for determining the inode of the file.
 * @defvar apr_ino_t
 */
typedef apr_uint64_t              apr_ino_t;
/**
 * Structure for determining the device the file is on.
 * @defvar apr_dev_t
 */
typedef apr_uint32_t              apr_dev_t;
#else
typedef ino_t                     apr_ino_t;
typedef dev_t                     apr_dev_t;
#endif

typedef struct apr_finfo_t        apr_finfo_t;

#define APR_FINFO_LINK   0x00000001
#define APR_FINFO_MTIME  0x00000010
#define APR_FINFO_CTIME  0x00000020
#define APR_FINFO_ATIME  0x00000040
#define APR_FINFO_SIZE   0x00000100
#define APR_FINFO_CSIZE  0x00000200
#define APR_FINFO_DEV    0x00001000
#define APR_FINFO_INODE  0x00002000
#define APR_FINFO_NLINK  0x00004000
#define APR_FINFO_TYPE   0x00008000
#define APR_FINFO_USER   0x00010000 
#define APR_FINFO_GROUP  0x00020000 
#define APR_FINFO_UPROT  0x00100000 
#define APR_FINFO_GPROT  0x00200000
#define APR_FINFO_WPROT  0x00400000
#define APR_FINFO_ICASE  0x01000000  /*  if dev is case insensitive */
#define APR_FINFO_NAME   0x02000000  /*  ->name in proper case */

#define APR_FINFO_MIN    0x00008170  /*  type, mtime, ctime, atime, size */
#define APR_FINFO_IDENT  0x00003000  /*  dev and inode */
#define APR_FINFO_OWNER  0x00030000  /*  user and group */
#define APR_FINFO_PROT   0x00700000  /*  all protections */
#define APR_FINFO_NORM   0x0073b170  /*  an atomic unix apr_stat() */
#define APR_FINFO_DIRENT 0x02000000  /*  an atomic unix apr_dir_read() */

/**
 * The file information structure.  This is analogous to the POSIX
 * stat structure.
 */
struct apr_finfo_t {
    /** Allocates memory and closes lingering handles in the specified pool */
    apr_pool_t *cntxt;
    /** The bitmask describing valid fields of this apr_finfo_t structure 
     *  including all available 'wanted' fields and potentially more */
    apr_int32_t valid;
    /** The access permissions of the file.  Mimics Unix access rights. */
    apr_fileperms_t protection;
    /** The type of file.  One of APR_NOFILE, APR_REG, APR_DIR, APR_CHR, 
     *  APR_BLK, APR_PIPE, APR_LNK, APR_SOCK 
     */
    apr_filetype_e filetype;
    /** The user id that owns the file */
    apr_uid_t user;
    /** The group id that owns the file */
    apr_gid_t group;
    /** The inode of the file. */
    apr_ino_t inode;
    /** The id of the device the file is on. */
    apr_dev_t device;
    /** The number of hard links to the file. */
    apr_int32_t nlink;
    /** The size of the file */
    apr_off_t size;
    /** The storage size consumed by the file */
    apr_off_t csize;
    /** The time the file was last accessed */
    apr_time_t atime;
    /** The time the file was last modified */
    apr_time_t mtime;
    /** The time the file was last changed */
    apr_time_t ctime;
    /** The full pathname of the file */
    const char *fname;
    /** The file's name (no path) in filesystem case */
    const char *name;
    /** The file's handle, if accessed (can be submitted to apr_duphandle) */
    struct apr_file_t *filehand;
};

/**
 * get the specified file's stats.  The file is specified by filename, 
 * instead of using a pre-opened file.
 * @param finfo Where to store the information about the file, which is
 * never touched if the call fails.
 * @param fname The name of the file to stat.
 * @param wanted The desired apr_finfo_t fields, as a bit flag of APR_FINFO_ values 
 * @param cont the pool to use to allocate the new file. 
 * @deffunc apr_status_t apr_stat(apr_finfo_t *finfo, const char *fname, apr_int32_t wanted, apr_pool_t *cont)
 */ 
APR_DECLARE(apr_status_t) apr_stat(apr_finfo_t *finfo, const char *fname,
                                   apr_int32_t wanted, apr_pool_t *cont);

/**
 * get the specified file's stats.  The file is specified by filename, 
 * instead of using a pre-opened file.  If the file is a symlink, this function
 * will get the stats for the symlink not the file the symlink refers to.
 * @param finfo Where to store the information about the file, which is
 * never touched if the call fails.
 * @param fname The name of the file to stat.
 * @param wanted The desired apr_finfo_t fields, as a bit flag of APR_FINFO_ values 
 * @param cont the pool to use to allocate the new file. 
 * @deffunc apr_status_t apr_lstat(apr_finfo_t *finfo, const char *fname, apr_int32_t wanted, apr_pool_t *cont)
 * @tip This function is depreciated, it's equivilant to calling apr_stat with 
 * the wanted flag value APR_FINFO_LINK
 */ 
APR_DECLARE(apr_status_t) apr_lstat(apr_finfo_t *finfo, const char *fname,
                                    apr_int32_t wanted, apr_pool_t *cont);

/**
 * Open the specified directory.
 * @param new_dir The opened directory descriptor.
 * @param dirname The full path to the directory (use / on all systems)
 * @param cont The pool to use.
 * @deffunc apr_status_t apr_dir_open(apr_dir_t **new_dir, const char *dirname, apr_pool_t *cont)
 */                        
APR_DECLARE(apr_status_t) apr_dir_open(apr_dir_t **new_dir, 
                                       const char *dirname, 
                                       apr_pool_t *cont);

/**
 * close the specified directory. 
 * @param thedir the directory descriptor to close.
 * @deffunc apr_status_t apr_dir_close(apr_dir_t *thedir)
 */                        
APR_DECLARE(apr_status_t) apr_dir_close(apr_dir_t *thedir);

/**
 * Read the next entry from the specified directory. 
 * @param finfo the file info structure and filled in by apr_dir_read
 * @param wanted The desired apr_finfo_t fields, as a bit flag of APR_FINFO_ values 
 * @param thedir the directory descriptor returned from apr_dir_open
 * @tip All systems return . and .. as the first two files.
 * @deffunc apr_status_t apr_dir_read(apr_finfo_t *finfo, apr_int32_t wanted, apr_dir_t *thedir)
 */                        
APR_DECLARE(apr_status_t) apr_dir_read(apr_finfo_t *finfo, apr_int32_t wanted,
                                       apr_dir_t *thedir);

/**
 * Rewind the directory to the first entry.
 * @param thedir the directory descriptor to rewind.
 * @deffunc apr_status_t apr_dir_rewind(apr_dir_t *thedir)
 */                        
APR_DECLARE(apr_status_t) apr_dir_rewind(apr_dir_t *thedir);

/* apr_filepath flags
 */

/* Cause apr_filepath_merge to fail if addpath is above rootpath */
#define APR_FILEPATH_NOTABOVEROOT   0x01

/* internal: Only meaningful with APR_FILEPATH_NOTABOVEROOT */
#define APR_FILEPATH_SECUREROOTTEST 0x02

/* Cause apr_filepath_merge to fail if addpath is above rootpath,
 * even given a rootpath /foo/bar and an addpath ../bar/bash
 */
#define APR_FILEPATH_SECUREROOT     0x03

/* Fail apr_filepath_merge if the merged path is relative */
#define APR_FILEPATH_NOTRELATIVE    0x04

/* Fail apr_filepath_merge if the merged path is absolute */
#define APR_FILEPATH_NOTABSOLUTE    0x08

/* Cleans all ambigious /./  or // segments 
 * if the target is a directory */
#define APR_FILEPATH_CANONICAL      0x10

/* Resolve the true case of existing directories and file elements
 * of addpath, and append a proper trailing slash if a directory
 */
#define APR_FILEPATH_TRUENAME       0x20


/**
 * Merge additional file path onto the previously processed rootpath
 * @param newpath the merged paths returned
 * @param rootpath the root file path (NULL uses the current working path)
 * @param addpath the path to add to the root path
 * @param flags the desired APR_FILEPATH_ rules to apply when merging
 * @param p the pool to allocate the new path string from
 * @deffunc apr_status_t apr_filepath_merge(char **newpath, const char *rootpath, const char *addpath, apr_int32_t flags, apr_pool_t *p)
 */                        
APR_DECLARE(apr_status_t) 
                apr_filepath_merge(char **newpath, const char *rootpath,
                                   const char *addpath, apr_int32_t flags,
                                   apr_pool_t *p);

#ifdef __cplusplus
}
#endif

#endif  /* ! APR_FILE_INFO_H */