tfstest.c

可移到ucos上的文件系统

/* tfstest.c:
 *
 *	This file is included with the common monitor code, but it is not
 *	actually part of the monitor.  It is included here because it is
 *	an integral part of the monitor's stability... TFS test suite.
 *	It can be built on any platform the monitor supports by making this
 *	file a simple application that runs out of TFS.
 *
 * General notice:
 * This code is part of a boot-monitor package developed as a generic base
 * platform for embedded system designs.  As such, it is likely to be
 * distributed to various projects beyond the control of the original
 * author.  Please notify the author of any enhancements made or bugs found
 * so that all may benefit from the changes.  In addition, notification back
 * to the author will allow the new user to pick up changes that may have
 * been made by other users after this version of the code was distributed.
 *
 * Author:	Ed Sutter
 * email:	[e-mail]		(home: [e-mail])
 * phone:	[phone]			(home: 908-889-5161)
 */

#include "tfs.h"

typedef unsigned long ulong;
typedef unsigned short ushort;
typedef unsigned char uchar;

#define TMPFILE "newfile"
#define TRUNCATE_SIZE	5


#define die()			errexit(__LINE__);
#define tfsdie(errno)	errtfs(__LINE__,errno);

int	verbose;
char	buffer1[512];
char	buffer2[512];

/* data1 & new_data1:
 * These arrays are used to create files and test file operations.
 * Do NOT modify these arrays, their content is used to verify files
 * that are created and modified.
 */

char *data1 =
"abcdefghij\nBBBBBBBBBB\nCCCCCCCCCC\n1234567890\nEEEEEEEEEE\n";

char *new_data1 =
"abceefghij\nBBBBBBBBBB\nCCCCCCCCCC\n1234567890\nEEEEEEEEEE\n";

/* errexit() and errtfs():
 *	Functions used (via macros above) to report error conditions detected
 *	by the tests below.
 */
void
errexit(int line)
{
	mon_printf("ERROR line %d\n",line);
	mon_appexit(-1);
}

void
errtfs(int line, int tfserrno)
{
	mon_printf("TFSERROR_%d (line %d): %s\n",(int)tfserrno,
		line,(char *)mon_tfsctrl(TFS_ERRMSG,tfserrno,0));
	mon_appexit(-1);
}

/* 
 *	getlinetest():
 *	The incoming filename is assumed to have been previously created with
 *	the data pointed to by the incoming data pointer.  
 *	Lines are read from the file via tfsgetline() and the buffer is filled
 *	with what should be the same data as is pulled in by tfsgetline().
 */
void
getlinetest(char *file, char *data)
{
	int	llen, tfd, err;

	tfd = mon_tfsopen(file,TFS_RDONLY,0);
	if (tfd < 0)
		tfsdie(tfd);

	/* Retrieve a line from the file: */
	err = mon_tfsgetline(tfd,buffer1,sizeof(buffer1));
	if (err < 0)
		tfsdie(err);

	/* Retrieve the same line from the data: */
	for(llen=0;*data;llen++,data++) {
		buffer2[llen] = *data;
		if (*data == '\n')
			break;
	}
	buffer2[llen+1] = 0;	

	/* They should match... */
	if (memcmp(buffer1,buffer2,llen))
		die();

	/* Again... */

	/* Retrieve a line from the file: */
	err = mon_tfsgetline(tfd,buffer1,sizeof(buffer1));
	if (err < 0)
		tfsdie(err);

	/* Retrieve the same line from the data: */
	for(llen=0;*data;llen++,data++) {
		buffer2[llen] = *data;
		if (*data == '\n')
			break;
	}
	buffer2[llen+1] = 0;	

	/* They should match... */
	if (memcmp(buffer1,buffer2,llen))
		die();


	/* One more line... */

	/* Retrieve a line from the file: */
	err = mon_tfsgetline(tfd,buffer1,sizeof(buffer1));
	if (err < 0)
		tfsdie(err);

	/* Retrieve the same line from the data: */
	for(llen=0;*data;llen++,data++) {
		buffer2[llen] = *data;
		if (*data == '\n')
			break;
	}
	buffer2[llen+1] = 0;	

	/* They should match... */
	if (memcmp(buffer1,buffer2,llen))
		die();

	mon_tfsclose(tfd,0);
}

/*
 *	cmp():
 *	File Compare...
 *	Use the standard TFS facilities to compare two different incoming files.
 *	Return 0 if files match, else -1.
 */
int
cmp(char *f1, char *f2)
{
	TFILE	finfo1, *tfp1;
	TFILE	finfo2, *tfp2;
	int		fd1, fd2, size, ret;
	char	*buf1, *buf2;

	/* Check sizes first: */
	tfp1 = &finfo1;
	if (mon_tfsfstat(f1,tfp1) == -1)
		die();
	tfp2 = &finfo2;
	if (mon_tfsfstat(f2,tfp2) == -1)
		die();
	if (tfp1->filsize != tfp2->filsize)
		return(-1);

	/* Copy f1 to buffer: */
	buf1 = mon_malloc(TFS_SIZE(tfp1));
	if (!buf1)
		die();
	fd1 = mon_tfsopen(f1,TFS_RDONLY,0);
	if (fd1 < 0)
		tfsdie(fd1);
	size = mon_tfsread(fd1,buf1,TFS_SIZE(tfp1));
	if (size != TFS_SIZE(tfp1))
		tfsdie(size);
	ret = mon_tfsclose(fd1,0);
	if (ret != TFS_OKAY)
		tfsdie(ret);

	/* Copy f2 to buffer: */
	buf2 = mon_malloc(TFS_SIZE(tfp2));
	if (!buf2)
		die();
	fd2 = mon_tfsopen(f2,TFS_RDONLY,0);
	if (fd2 < 0)
		tfsdie(fd2);
	size = mon_tfsread(fd2,buf2,TFS_SIZE(tfp2));
	if (size != TFS_SIZE(tfp2))
		tfsdie(size);
	ret = mon_tfsclose(fd2,0);
	if (ret != TFS_OKAY)
		tfsdie(ret);

	/* Compare the buffers: */
	if (memcmp(buf1,buf2,TFS_SIZE(tfp2)))
		ret = -1;
	else
		ret = 0;

	mon_free(buf1);
	mon_free(buf2);
	return(ret);
}

/*
 *	cp():
 *	File Copy...
 *	Use standard TFS facilities to copy one file to another.
 *	If successful, return the size of the copy; else die.
 */
int
cp(char *to, char *from)
{
	TFILE	finfo, *tfp;
	long	flags;
	int		ffd, tfd, size, ret;
	char	line[80], *buffer;

	/* Open the source file: */
	ffd = mon_tfsopen(from,TFS_RDONLY,0);
	if (ffd < 0)
		tfsdie(ffd);

	/* Retrieve stats of the source file: */
	tfp = &finfo;
	if (mon_tfsfstat(from,tfp) == -1)
		die();

	/* The buffer used to open the destination file must be as large as
	 * the source file ...
	 */
	buffer = mon_malloc(TFS_SIZE(tfp));
	if (!buffer)
		die();

	/* Open the destination file for creation with the same flags
	 * as the source file:
	 */
	tfd = mon_tfsopen(to,TFS_CREATE | finfo.flags,buffer);
	if (tfd < 0)
		tfsdie(tfd);

	/* Read the entire source file into buffer, then write the entire
	 * buffer to the destination file...
	 */
	size = mon_tfsread(ffd,buffer,TFS_SIZE(tfp));
	if (size < 0)  
		tfsdie(size);
	ret = mon_tfswrite(tfd,buffer,TFS_SIZE(tfp));
	if (ret != TFS_OKAY)
		tfsdie(ret);

	mon_tfsclose(ffd,0);
	mon_tfsclose(tfd,finfo.info);
	mon_free(buffer);
	return(TFS_SIZE(tfp));
}

/*
 *	inusetest():
 *	Open a file, then try to remove it or add a file with the same name.
 *	This should fail...
 */
int
inusetest(char *fname)
{
	int	tfd, err;

	/* Open a file, then try to run tfsadd() on it or try to remove it... */
	tfd = mon_tfsopen(fname,TFS_RDONLY,0);
	if (tfd < 0)
		tfsdie(tfd);

	err = mon_tfsunlink(fname);
	if (err != TFSERR_FILEINUSE)
		tfsdie(err);
	err = mon_tfsadd(fname,0,0,buffer1,10);
	if (err != TFSERR_FILEINUSE)
		tfsdie(err);

	mon_tfsclose(tfd,0);
	return(0);
}

/* seektest():
 *	Run some tests on tfsseek().
 *	Verify that the character in the file specified at the incoming offset
 *	is as expected.  Seek to beyond the end of file and verify error, etc...
 */
int
seektest(char *fname, int offset, char value)
{
	char	c, buf1[16], buf2[16];
	TFILE	*tfp;
	int		tfd, end, err;

	/* Open the source file: */
	tfd = mon_tfsopen(fname,TFS_RDONLY,0);
	if (tfd < 0)
		tfsdie(tfd);

	if (mon_tfsseek(tfd,offset,TFS_BEGIN) != TFS_OKAY)
		tfsdie(tfd);
	
	if (mon_tfsread(tfd,&c,1) != 1)
		tfsdie(tfd);

	if (c != value)
		die();

	tfp = mon_tfsstat(fname);
	if (!tfp)
		die();
	end = TFS_SIZE(tfp);

	/* 
	 * Seek to various limits in the file and verify proper return
	 * value...
	 */
	err = mon_tfsseek(tfd,0,TFS_BEGIN);
	if (err != TFS_OKAY)
		tfsdie(err);
	err = mon_tfsseek(tfd,end,TFS_CURRENT);
	if (err != TFS_OKAY)
		tfsdie(err);
	err = mon_tfsseek(tfd,1,TFS_CURRENT);
	if (err != TFSERR_EOF)
		tfsdie(err);
	err = mon_tfsseek(tfd,end,TFS_BEGIN);
	if (err != TFS_OKAY)
		tfsdie(err);
	err = mon_tfsseek(tfd,end+1,TFS_BEGIN);
	if (err != TFSERR_EOF)
		tfsdie(err);

	err = mon_tfsseek(tfd,0,TFS_BEGIN);
	if (err != TFS_OKAY)
		tfsdie(err);
	err = mon_tfsseek(tfd,-1,TFS_CURRENT);
	if (err != TFSERR_EOF)
		tfsdie(err);

	err = mon_tfsseek(tfd,end,TFS_BEGIN);
	if (err != TFS_OKAY)
		tfsdie(err);
	err = mon_tfsseek(tfd,-1,TFS_CURRENT);
	if (err != TFS_OKAY)
		tfsdie(err);
	err = mon_tfsseek(tfd,2,TFS_CURRENT);
	if (err != TFSERR_EOF)
		tfsdie(err);

	/* Seek to beginning, read 10, seek to beginning again read 10 again.
	 * Verify that both reads have same data.
	 */
	err = mon_tfsseek(tfd,0,TFS_BEGIN);
	if (err != TFS_OKAY)
		tfsdie(err);
	err = mon_tfsread(tfd,buf1,10);
	if (err != 10)
		tfsdie(err);
	err = mon_tfsseek(tfd,0,TFS_BEGIN);
	if (err != TFS_OKAY)
		tfsdie(err);
	err = mon_tfsread(tfd,buf2,10);
	if (err != 10)
		tfsdie(err);
	if (memcmp(buf1,buf2,10))
		die();

	/*
	 * Seek to end, then verify that read() returns EOF and tfs_eof()
	 * returns true.
	 */
	err = mon_tfsseek(tfd,end,TFS_BEGIN);
	if (err != TFS_OKAY)
		tfsdie(err);
	err = mon_tfsread(tfd,buf1,1);
	if (err != TFSERR_EOF)
		tfsdie(err);
	if (mon_tfseof(tfd) != 1)
		die();

	mon_tfsclose(tfd,0);
	return(0);
}

/* writetest():
 *  Open the specified file in APPEND (modify) mode.  Seek into the file
 *	and read 1 byte.  Increment that byte by one and then write it back
 *	to the same location from which it was read.  Then, close the file.
 *	Build a new file that is what "should" be the content of the file we
 *	just modified and compare the two files.  They better match.
 */
int
writetest(char *fname, char *newdata)
{
	TFILE *tfp;
	char c;
	int	size, tfd, err;

	/* Open the source file: */
	tfp = mon_tfsstat(fname);
	if (!tfp)
		die();
	size = TFS_SIZE(tfp);
	tfd = mon_tfsopen(fname,TFS_APPEND,buffer1);
	if (tfd < 0)
		tfsdie(tfd);
	err = mon_tfsseek(tfd,3,TFS_BEGIN);
	if (err != TFS_OKAY)
		tfsdie(err);
	err = mon_tfsread(tfd,&c,1);
	if (err != 1)
		tfsdie(err);
	c++;
	err = mon_tfsseek(tfd,-1,TFS_CURRENT);