📄 testpromiscuousc.nc
字号:
/*
* Copyright (c) 2008, Technische Universitaet Berlin
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* - Neither the name of the Technische Universitaet Berlin nor the names
* of its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
* OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* - Revision -------------------------------------------------------------
* $Revision: 1.1 $
* $Date: 2009/10/29 17:42:56 $
* @author: Jan Hauer <hauer@tkn.tu-berlin.de>
* ========================================================================
*/
#include "TKN154.h"
module TestPromiscuousC
{
uses {
interface Boot;
interface MLME_RESET;
interface MLME_SET;
interface MLME_GET;
interface MCPS_DATA;
interface Leds;
interface IEEE154Frame as Frame;
interface IEEE154BeaconFrame as BeaconFrame;
interface SplitControl as PromiscuousMode;
}
} implementation {
const char *m_frametype[] = {"Beacon", "Data","Acknowledgement","MAC command", "Unknown"};
const char *m_cmdframetype[] = {"unknown command", "Association request","Association response",
"Disassociation notification","Data request","PAN ID conflict notification",
"Orphan notification", "Beacon request", "Coordinator realignment", "GTS request"};
enum {
RADIO_CHANNEL = 26,
};
event void Boot.booted() {
call MLME_RESET.request(TRUE);
}
event void MLME_RESET.confirm(ieee154_status_t status)
{
call MLME_SET.phyCurrentChannel(RADIO_CHANNEL);
call PromiscuousMode.start();
}
event message_t* MCPS_DATA.indication (message_t* frame)
{
uint8_t i;
uint8_t *payload = call Frame.getPayload(frame);
uint8_t payloadLen = call Frame.getPayloadLength(frame);
uint8_t *header = call Frame.getHeader(frame);
uint8_t headerLen = call Frame.getHeaderLength(frame);
uint8_t SrcAddrMode, DstAddrMode;
uint8_t frameType, cmdFrameType;
ieee154_address_t SrcAddress, DstAddress;
uint16_t SrcPANId=0, DstPANId=0;
if (call Frame.hasStandardCompliantHeader(frame)){
frameType = call Frame.getFrameType(frame);
if (frameType > FRAMETYPE_CMD)
frameType = 4;
call Frame.getSrcPANId(frame, &SrcPANId);
call Frame.getDstPANId(frame, &DstPANId);
call Frame.getSrcAddr(frame, &SrcAddress);
call Frame.getDstAddr(frame, &DstAddress);
SrcAddrMode = call Frame.getSrcAddrMode(frame);
DstAddrMode = call Frame.getDstAddrMode(frame);
printf("\n");
printf("Frametype: %s", m_frametype[frameType]);
if (frameType == FRAMETYPE_CMD){
cmdFrameType = payload[0];
if (cmdFrameType > 9)
cmdFrameType = 0;
printf(" (%s)", m_cmdframetype[cmdFrameType]);
}
printf("\n");
printf("SrcAddrMode: %d\n", SrcAddrMode);
printf("SrcAddr: ");
if (SrcAddrMode == ADDR_MODE_SHORT_ADDRESS){
printf("0x%02X\n", SrcAddress.shortAddress);
printf("SrcPANId: 0x%02X\n", SrcPANId);
} else if (SrcAddrMode == ADDR_MODE_EXTENDED_ADDRESS){
for (i=0; i<8; i++)
printf("0x%02X ", ((uint8_t*) &(SrcAddress.extendedAddress))[i]);
printf("\n");
printf("SrcPANId: 0x%02X\n", SrcPANId);
} else printf("\n");
printf("DstAddrMode: %d\n", DstAddrMode);
printf("DstAddr: ");
if ( DstAddrMode == ADDR_MODE_SHORT_ADDRESS){
printf("0x%02X\n", DstAddress.shortAddress);
printf("DestPANId: 0x%02X\n", DstPANId);
} else if ( DstAddrMode == ADDR_MODE_EXTENDED_ADDRESS) {
for (i=0; i<8; i++)
printf("0x%02X ", ((uint8_t*) &(DstAddress.extendedAddress))[i]);
printf("\n");
printf("DestPANId: 0x%02X\n", DstPANId);
} else printf("\n");
printf("DSN: %d\n", call Frame.getDSN(frame));
printf("MHRLen: %d\n", headerLen);
printf("MHR: ");
for (i=0; i<headerLen; i++){
printf("0x%02X ", header[i]);
}
printf("\n");
printf("PayloadLen: %d\n", payloadLen);
printf("Payload: ");
for (i=0; i<payloadLen; i++){
printf("0x%02X ", payload[i]);
}
printf("\n");
printf("MpduLinkQuality: %d\n", call Frame.getLinkQuality(frame));
printf("Timestamp: ");
if (call Frame.isTimestampValid(frame))
printf("%ld\n", call Frame.getTimestamp(frame));
else
printf("INVALID\n");
printfflush();
}
call Leds.led1Toggle();
return frame;
}
event void MCPS_DATA.confirm( message_t *msg, uint8_t msduHandle, ieee154_status_t status, uint32_t Timestamp){}
event void PromiscuousMode.startDone(error_t error)
{
printf("\n*** Radio is now in promiscuous mode, listening on channel %d ***\n", RADIO_CHANNEL);
printfflush();
}
event void PromiscuousMode.stopDone(error_t error) {}
}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -