📄 testindirectdatadevicec.nc
字号:
/*
* Copyright (c) 2009, Technische Universitaet Berlin
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* - Neither the name of the Technische Universitaet Berlin nor the names
* of its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
* OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* - Revision -------------------------------------------------------------
* $Revision: 1.2 $
* $Date: 2009/09/10 12:00:50 $
* @author: Jasper Buesch <buesch@tkn.tu-berlin.de>
* ========================================================================
*/
#include "TKN154.h"
#include "app_profile.h"
module TestIndirectDataDeviceC
{
uses {
interface Boot;
interface MCPS_DATA;
interface MLME_RESET;
interface MLME_SET;
interface MLME_GET;
interface MLME_POLL;
interface Leds;
interface Timer<T62500hz> as PollTimer;
interface Timer<T62500hz> as Led2Timer;
}
} implementation {
void startApp();
event void Boot.booted() {
call MLME_RESET.request(TRUE);
}
event void MLME_RESET.confirm(ieee154_status_t status)
{
if (status == IEEE154_SUCCESS)
startApp();
}
void startApp()
{
call MLME_SET.phyCurrentChannel(RADIO_CHANNEL);
call MLME_SET.macAutoRequest(FALSE);
call MLME_SET.macPANId(PAN_ID);
call MLME_SET.macCoordShortAddress(COORDINATOR_ADDRESS);
call MLME_SET.macShortAddress(DEVICE_ADDRESS);
call PollTimer.startPeriodic(62500U);
}
event void PollTimer.fired(){
// check the coordinator for outstanding transmissions
ieee154_address_t coordAdr;
coordAdr.shortAddress = COORDINATOR_ADDRESS;
call MLME_POLL.request (
ADDR_MODE_SHORT_ADDRESS,
PAN_ID,
coordAdr,
NULL
);
}
event void MLME_POLL.confirm (
ieee154_status_t status
){}
event void MCPS_DATA.confirm(
message_t *msg,
uint8_t msduHandle,
ieee154_status_t status,
uint32_t Timestamp
){}
event message_t* MCPS_DATA.indication ( message_t* frame__ ){
call Leds.led2On();
call Led2Timer.startOneShot(12500U);
return frame__;
}
event void Led2Timer.fired(){
call Leds.led2Off();
}
}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -