📄 lis3l02dq.h
字号:
/*
* Copyright (c) 2005-2006 Arch Rock Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
* - Neither the name of the Arch Rock Corporation nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* ARCHED ROCK OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE
*/
/**
* Types and definitions for the ST LIS3L02DQ 3-axis Accelerometer
*
* @author Phil Buonadonna <pbuonadonna@archrock.com>
* @version $Revision: 1.4 $ $Date: 2006/12/12 18:23:06 $
*/
#ifndef _LIS3L02DQ_H
#define _LIS3L02DQ_H
#define LIS3L02DQ_OFFSET_X (0x16)
#define LIS3L02DQ_OFFSET_Y (0x17)
#define LIS3L02DQ_OFFSET_Z (0x18)
#define LIS3L02DQ_GAIN_X (0x19)
#define LIS3L02DQ_GAIN_Y (0x1A)
#define LIS3L02DQ_GAIN_Z (0x1B)
#define LIS3L02DQ_CTRL_REG1 (0x20)
#define LIS3L02DQ_CTRL_REG2 (0x21)
#define LIS3L02DQ_WAKE_UP_CFG (0x23)
#define LIS3L02DQ_WAKE_UP_SRC (0x24)
#define LIS3L02DQ_WAKE_UP_ACK (0x25)
#define LIS3L02DQ_STATUS_REG (0x27)
#define LIS3L02DQ_OUTX_L (0x28)
#define LIS3L02DQ_OUTX_H (0x29)
#define LIS3L02DQ_OUTY_L (0x2A)
#define LIS3L02DQ_OUTY_H (0x2B)
#define LIS3L02DQ_OUTZ_L (0x2C)
#define LIS3L02DQ_OUTZ_H (0x2D)
#define LIS3L02DQ_THS_L (0x2E)
#define LIS3L02DQ_THS_H (0x2F)
#define LIS3L01DQ_CTRL_REG1_PD(_x) (((_x) & 0x3) << 6)
#define LIS3L01DQ_CTRL_REG1_DF(_x) (((_x) & 0x3) << 4)
#define LIS3L01DQ_CTRL_REG1_ST (1 << 3)
#define LIS3L01DQ_CTRL_REG1_ZEN (1 << 2)
#define LIS3L01DQ_CTRL_REG1_YEN (1 << 1)
#define LIS3L01DQ_CTRL_REG1_XEN (1 << 0)
#define LIS3L01DQ_CTRL_REG2_RES (1 << 7)
#define LIS3L01DQ_CTRL_REG2_BDU (1 << 6)
#define LIS3L01DQ_CTRL_REG2_BLE (1 << 5)
#define LIS3L01DQ_CTRL_REG2_BOOT (1 << 4)
#define LIS3L01DQ_CTRL_REG2_IEN (1 << 3)
#define LIS3L01DQ_CTRL_REG2_DRDY (1 << 2)
#define LIS3L01DQ_CTRL_REG2_SIM (1 << 1)
#define LIS3L01DQ_CTRL_REG2_DAS (1 << 0)
#define LIS3L02DQ_WAKE_UP_CFG_AOI (1 << 7)
#define LIS3L02DQ_WAKE_UP_CFG_LIR (1 << 6)
#define LIS3L02DQ_WAKE_UP_CFG_ZHIE (1 << 5)
#define LIS3L02DQ_WAKE_UP_CFG_ZLIE (1 << 4)
#define LIS3L02DQ_WAKE_UP_CFG_YHIE (1 << 3)
#define LIS3L02DQ_WAKE_UP_CFG_YLIE (1 << 2)
#define LIS3L02DQ_WAKE_UP_CFG_XHIE (1 << 1)
#define LIS3L02DQ_WAKE_UP_CFG_XLIE (1 << 0)
typedef enum {
LIS_AFLAGS_NONE,
LIS_AFLAGS_HIGH,
LIS_AFLAGS_LOW,
LIS_AFLAGS_BOTH
} lis_alertflags_t;
#endif /* _LIS3L02DQ_H */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -