hpltda5250configp.nc

来自「tinyos-2.x.rar」· NC 代码 · 共 513 行 · 第 1/2 页

    currentConfig = CONFIG_LNA_GAIN_HIGH(currentConfig);
    call CONFIG.set(currentConfig);
  }
  /* <<tested>> */
  async command void HplTda5250Config.LowLNAGain() {
    currentConfig = CONFIG_LNA_GAIN_LOW(currentConfig);
    call CONFIG.set(currentConfig);
  }
  async command void HplTda5250Config.EnableReceiverInTimedModes() {
    currentConfig = CONFIG_EN_RX_ENABLE(currentConfig);
    call CONFIG.set(currentConfig);
  }
  async command void HplTda5250Config.DisableReceiverInTimedModes() {
    currentConfig = CONFIG_EN_RX_DISABLE(currentConfig);
    call CONFIG.set(currentConfig);
  }
  /* <<tested>> */
  async command void HplTda5250Config.UseHighTxPower() {
    currentConfig = CONFIG_PA_PWR_HIGHTX(currentConfig);
    call CONFIG.set(currentConfig);
  }
  /* <<tested>> */
  async command void HplTda5250Config.UseLowTxPower() {
    currentConfig = CONFIG_PA_PWR_LOWTX(currentConfig);
    call CONFIG.set(currentConfig);
  }

  async command void HplTda5250Config.TuneNomFreqWithBipolarFET(tda5250_bipolar_fet_ramp_times_t ramp_time, tda5250_cap_vals_t cap_val) {
    call XTAL_CONFIG.set(ramp_time);
    call XTAL_CONFIG.set(((uint16_t)cap_val) & 0x003F);
  }
  async command void HplTda5250Config.TuneNomFreqWithFET(tda5250_cap_vals_t cap_val) {
    call XTAL_CONFIG.set(0x00);
    call XTAL_CONFIG.set(((uint16_t)cap_val) & 0x003F);
  }
  /* <<tested>> */
  async command void HplTda5250Config.SetRFPower(uint8_t value) {
    call RF_POWER.set(value);
  }

  /**
  Set the mode of the radio
  The choices are SLAVE_MODE, TIMER_MODE, SELF_POLLING_MODE
  */
  
  /* << tested >> */
  async command void HplTda5250Config.SetSlaveMode() {
    call PWDDDInterrupt.disable();
    call PWDDD.makeOutput();
    call PWDDD.clr();
    currentConfig = CONFIG_MODE_1_SLAVE_OR_TIMER(currentConfig);
    currentConfig = CONFIG_MODE_2_SLAVE(currentConfig);
    // SetSlaveMode() is always called in conjunction with another function that writes the config...
    // call CONFIG.set(currentConfig);
  }
  async command void HplTda5250Config.SetTimerMode(float on_time, float off_time) {
    call PWDDD.clr();
    call ON_TIME.set(TDA5250_CONVERT_TIME(on_time));
    call OFF_TIME.set(TDA5250_CONVERT_TIME(off_time));
    currentConfig = CONFIG_MODE_1_SLAVE_OR_TIMER(currentConfig);
    currentConfig = CONFIG_MODE_2_TIMER(currentConfig);
    call CONFIG.set(currentConfig);
    call TXRX.set();
    call PWDDD.makeInput();
    call PWDDDInterrupt.enableFallingEdge();
  }
  async command void HplTda5250Config.ResetTimerMode() {
    call PWDDD.clr();
    currentConfig = CONFIG_MODE_1_SLAVE_OR_TIMER(currentConfig);
    currentConfig = CONFIG_MODE_2_TIMER(currentConfig);
    call CONFIG.set(currentConfig);
    call PWDDD.makeInput();
    call PWDDDInterrupt.enableFallingEdge();
  }
  async command void HplTda5250Config.SetSelfPollingMode(float on_time, float off_time) {
    call PWDDD.clr();
    call ON_TIME.set(TDA5250_CONVERT_TIME(on_time));
    call OFF_TIME.set(TDA5250_CONVERT_TIME(off_time));
    currentConfig = CONFIG_MODE_1_SELF_POLLING(currentConfig);
    call CONFIG.set(currentConfig);
    call TXRX.set();
    call PWDDD.makeInput();
    call PWDDDInterrupt.enableFallingEdge();
  }
  async command void HplTda5250Config.ResetSelfPollingMode() {
    call PWDDD.clr();
    currentConfig = CONFIG_MODE_1_SELF_POLLING(currentConfig);
    call CONFIG.set(currentConfig);
    call TXRX.set();
    call PWDDD.makeInput();
    call PWDDDInterrupt.enableFallingEdge();
  }
  /**
  Set the on time and off time of the radio
  (Only makes sense when in TIMER or SELF_POLLING Mode)
  */
  async command void HplTda5250Config.SetOnTime_ms(float time) {
    call ON_TIME.set(TDA5250_CONVERT_TIME(time));
  }
  async command void HplTda5250Config.SetOffTime_ms(float time) {
    call OFF_TIME.set(TDA5250_CONVERT_TIME(time));
  }
  /**
  Set the frequency that the CLK_DIV outputs
  (Available frequencies given in Tda5250ClockFreq_t struct)
  */
  async command void HplTda5250Config.UseSetClock() {
    currentClockDiv &= 0x0F;
    call CLK_DIV.set(currentClockDiv);
  }
  async command void HplTda5250Config.Use18MHzClock() {
    currentClockDiv |= 0x10;
    currentClockDiv &= 0x1F;
    call CLK_DIV.set(currentClockDiv);
  }
  async command void HplTda5250Config.Use32KHzClock() {
    currentClockDiv |= 0x20;
    currentClockDiv &= 0x2F;
    call CLK_DIV.set(currentClockDiv);
  }
  async command void HplTda5250Config.UseWindowCountAsClock() {
    currentClockDiv |= 0x30;
    call CLK_DIV.set(currentClockDiv);
  }
  async command void HplTda5250Config.SetRadioClock(tda5250_clock_out_freqs_t freq) {
    currentClockDiv = (currentClockDiv & 0x30) + freq;
    call CLK_DIV.set(currentClockDiv);
  }

  /**
  Sets the threshold Values for internal evaluation
  */
  
  /* <<tested>> */
  async command void HplTda5250Config.SetRSSIThreshold(uint8_t value) {
    call RSSI_TH3.set(0xC0 | value);
  }
  async command void HplTda5250Config.SetVCCOver5Threshold(uint8_t value) {
    call RSSI_TH3.set(0x3F & value);
  }
  async command void HplTda5250Config.SetLowerDataRateThreshold(uint16_t value) {
    call COUNT_TH1.set(value);
  }
  async command void HplTda5250Config.SetUpperDataRateThreshold(uint16_t value) {
    call COUNT_TH2.set(value);
  }

  /**
  Get parts of certain registers according to their
  logical functionality
  */
  async command uint8_t HplTda5250Config.GetRSSIValue() {
    return (0x3F & call ADC.get());
  }
  async command uint8_t HplTda5250Config.GetADCSelectFeedbackBit() {
    return ((0x40 & call ADC.get()) >> 6);
  }
  async command uint8_t HplTda5250Config.GetADCPowerDownFeedbackBit() {
    return ((0x80 & call ADC.get()) >> 7);
  }
  async command bool HplTda5250Config.IsDataRateLessThanLowerThreshold() {
    if((0x80 & call STATUS.get()) == TRUE)
      return TRUE;
    return FALSE;
  }
  async command bool HplTda5250Config.IsDataRateBetweenThresholds() {
    if((0x40 & call STATUS.get()) == TRUE)
      return TRUE;
    return FALSE;
  }
  async command bool HplTda5250Config.IsDataRateLessThanUpperThreshold() {
    if((0x20 & call STATUS.get()) == TRUE)
      return TRUE;
    return FALSE;
  }
  async command bool HplTda5250Config.IsDataRateLessThanHalfOfLowerThreshold() {
    if((0x10 & call STATUS.get()) == TRUE)
      return TRUE;
    return FALSE;
  }
  async command bool HplTda5250Config.IsDataRateBetweenHalvesOfThresholds() {
    if((0x08 & call STATUS.get()) == TRUE)
      return TRUE;
    return FALSE;
  }
  async command bool HplTda5250Config.IsDataRateLessThanHalfOfUpperThreshold() {
    if((0x04 & call STATUS.get()) == TRUE)
      return TRUE;
    return FALSE;
  }
  async command bool HplTda5250Config.IsRSSIEqualToThreshold() {
    if((0x02 & call STATUS.get()) == TRUE)
      return TRUE;
    return FALSE;
  }
  async command bool HplTda5250Config.IsRSSIGreaterThanThreshold() {
    if((0x01 & call STATUS.get()) == TRUE)
      return TRUE;
    return FALSE;
  }

  /**
  Switches radio between states when in SLAVE_MODE
  */
  
  /* << tested >> */
  async command void HplTda5250Config.SetTxMode() {
    currentConfig = CONFIG_RX_NTX_TX(currentConfig);
    currentConfig = CONFIG_ALL_PD_NORMAL(currentConfig);
    if (currentConfig & MASK_CONFIG_CONTROL_TXRX_REGISTER) {
      call CONFIG.set(currentConfig);
    }
    else {
      call TXRX.clr();
      call PWDDD.clr();
    }
  }
 
  /* << tested >> */
  async command void HplTda5250Config.SetRxMode() {
    currentConfig = CONFIG_RX_NTX_RX(currentConfig);
    currentConfig = CONFIG_ALL_PD_NORMAL(currentConfig);
    if (currentConfig & MASK_CONFIG_CONTROL_TXRX_REGISTER) {
      call CONFIG.set(currentConfig);
    }
    else {
      call TXRX.set();
      call PWDDD.clr();
    }
  }
  
  /* << tested >> */
  async command void HplTda5250Config.SetSleepMode() {
        currentConfig = CONFIG_ALL_PD_POWER_DOWN(currentConfig);
	call PWDDD.makeOutput();
        call PWDDD.set();
  }
  
  async command bool HplTda5250Config.IsTxRxPinControlled() {
    return (currentConfig & MASK_CONFIG_CONTROL_TXRX_REGISTER);
  }

  /****************************************************************
  Events Implemented
  ************************************************/
  /**
  Interrupt Signal on PWD_DD pin in
  TIMER_MODE and SELF_POLLING_MODE
  */
  async event void PWDDDInterrupt.fired() {
    signal HplTda5250Config.PWDDDInterrupt();
  }

  default async event void HplTda5250Config.PWDDDInterrupt() {}
}