hplatm1281timer3p.nc

tinyos-2.x.rar

/*
 * Copyright (c) 2004-2005 Crossbow Technology, Inc.  All rights reserved.
 *
 * Permission to use, copy, modify, and distribute this software and its
 * documentation for any purpose, without fee, and without written agreement is
 * hereby granted, provided that the above copyright notice, the following
 * two paragraphs and the author appear in all copies of this software.
 *
 * IN NO EVENT SHALL CROSSBOW TECHNOLOGY OR ANY OF ITS LICENSORS BE LIABLE TO
 * ANY PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
 * DAMAGES ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN
 * IF CROSSBOW OR ITS LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
 * DAMAGE.
 *
 * CROSSBOW TECHNOLOGY AND ITS LICENSORS SPECIFICALLY DISCLAIM ALL WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
 * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
 * ON AN "AS IS" BASIS, AND NEITHER CROSSBOW NOR ANY LICENSOR HAS ANY
 * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR
 * MODIFICATIONS.
 */

/*
 * Copyright (c) 2007, Vanderbilt University
 * All rights reserved.
 *
 * Permission to use, copy, modify, and distribute this software and its
 * documentation for any purpose, without fee, and without written agreement is
 * hereby granted, provided that the above copyright notice, the following
 * two paragraphs and the author appear in all copies of this software.
 *
 * IN NO EVENT SHALL THE VANDERBILT UNIVERSITY BE LIABLE TO ANY PARTY FOR
 * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
 * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF THE VANDERBILT
 * UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * THE VANDERBILT UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
 * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
 * ON AN "AS IS" BASIS, AND THE VANDERBILT UNIVERSITY HAS NO OBLIGATION TO
 * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
 *
 */

/**
 * Internal component of the HPL interface to Atmega1281 timer 3.
 *
 * @author Martin Turon <[e-mail]>
 * @author Janos Sallai <[e-mail]>
 */

#include <Atm128Timer.h>

module HplAtm1281Timer3P @safe()
{
  provides {
    // 16-bit Timers
    interface HplAtm128Timer<uint16_t>   as Timer;
    interface HplAtm128TimerCtrl16       as TimerCtrl;
    interface HplAtm128Capture<uint16_t> as Capture;
    interface HplAtm128Compare<uint16_t> as CompareA;
    interface HplAtm128Compare<uint16_t> as CompareB;
    interface HplAtm128Compare<uint16_t> as CompareC;
  }
}
implementation
{
  //=== Read the current timer value. ===================================
  async command uint16_t Timer.get() { return TCNT3; }

  //=== Set/clear the current timer value. ==============================
  async command void Timer.set(uint16_t t) { TCNT3 = t; }

  //=== Read the current timer scale. ===================================
  async command uint8_t Timer.getScale() { return TCCR3B & 0x7; }

  //=== Turn off the timers. ============================================
  async command void Timer.off() { call Timer.setScale(AVR_CLOCK_OFF); }

  //=== Write a new timer scale. ========================================
  async command void Timer.setScale(uint8_t s)  {
    Atm128_TCCRB_t x = (Atm128_TCCRB_t) call TimerCtrl.getControlB();
    x.bits.cs = s;
    call TimerCtrl.setControlB(x.flat);
  }

  //=== Read the control registers. =====================================
  async command uint8_t TimerCtrl.getControlA() {
    return TCCR3A;
  }

  async command uint8_t TimerCtrl.getControlB() {
    return TCCR3B;
  }

  async command uint8_t TimerCtrl.getControlC() {
    return TCCR3C;
  }

  //=== Write the control registers. ====================================
  async command void TimerCtrl.setControlA( uint8_t x ) {
    TCCR3A = x;
  }

  async command void TimerCtrl.setControlB( uint8_t x ) {
    TCCR3B = x;
  }

  async command void TimerCtrl.setControlC( uint8_t x ) {
    TCCR3C = x;
  }

  //=== Read the interrupt mask. =====================================
  async command uint8_t TimerCtrl.getInterruptMask() {
    return TIMSK3;
  }

  //=== Write the interrupt mask. ====================================
  async command void TimerCtrl.setInterruptMask( uint8_t x ) {
    TIMSK3 = x;
  }

  //=== Read the interrupt flags. =====================================
  async command uint8_t TimerCtrl.getInterruptFlag() {
    return TIFR3;
  }

  //=== Write the interrupt flags. ====================================
  async command void TimerCtrl.setInterruptFlag( uint8_t x ) {
    TIFR3 = x;
  }

  //=== Capture 16-bit implementation. ===================================
  async command void Capture.setEdge(bool up) { WRITE_BIT(TCCR3B, ICES3, up); }

  //=== Timer 16-bit implementation. ===================================
  async command void Timer.reset()    { TIFR3 = 1 << TOV3; }
  async command void Capture.reset()  { TIFR3 = 1 << ICF3; }
  async command void CompareA.reset() { TIFR3 = 1 << OCF3A; }
  async command void CompareB.reset() { TIFR3 = 1 << OCF3B; }
  async command void CompareC.reset() { TIFR3 = 1 << OCF3C; }

  async command void Timer.start()    { SET_BIT(TIMSK3,TOIE3); }
  async command void Capture.start()  { SET_BIT(TIMSK3,ICIE3); }
  async command void CompareA.start() { SET_BIT(TIMSK3,OCIE3A); }
  async command void CompareB.start() { SET_BIT(TIMSK3,OCIE3B); }
  async command void CompareC.start() { SET_BIT(TIMSK3,OCIE3C); }

  async command void Timer.stop()    { CLR_BIT(TIMSK3,TOIE3); }
  async command void Capture.stop()  { CLR_BIT(TIMSK3,ICIE3); }
  async command void CompareA.stop() { CLR_BIT(TIMSK3,OCIE3A); }
  async command void CompareB.stop() { CLR_BIT(TIMSK3,OCIE3B); }
  async command void CompareC.stop() { CLR_BIT(TIMSK3,OCIE3C); }

  async command bool Timer.test() {
    return ((Atm128_TIFR_t)call TimerCtrl.getInterruptFlag()).bits.tov;
  }
  async command bool Capture.test()  {
    return ((Atm128_TIFR_t)call TimerCtrl.getInterruptFlag()).bits.icf;
  }
  async command bool CompareA.test() {
    return ((Atm128_TIFR_t)call TimerCtrl.getInterruptFlag()).bits.ocfa;
  }
  async command bool CompareB.test() {
    return ((Atm128_TIFR_t)call TimerCtrl.getInterruptFlag()).bits.ocfb;
  }
  async command bool CompareC.test() {
    return ((Atm128_TIFR_t)call TimerCtrl.getInterruptFlag()).bits.ocfc;
  }

  async command bool Timer.isOn() {
    return ((Atm128_TIMSK_t)call TimerCtrl.getInterruptMask()).bits.toie;
  }
  async command bool Capture.isOn()  {
    return ((Atm128_TIMSK_t)call TimerCtrl.getInterruptMask()).bits.icie;
  }
  async command bool CompareA.isOn() {
    return ((Atm128_TIMSK_t)call TimerCtrl.getInterruptMask()).bits.ociea;
  }
  async command bool CompareB.isOn() {
    return ((Atm128_TIMSK_t)call TimerCtrl.getInterruptMask()).bits.ocieb;
  }
  async command bool CompareC.isOn() {
    return ((Atm128_TIMSK_t)call TimerCtrl.getInterruptMask()).bits.ociec;
  }

  //=== Read the compare registers. =====================================
  async command uint16_t CompareA.get() { return OCR3A; }
  async command uint16_t CompareB.get() { return OCR3B; }
  async command uint16_t CompareC.get() { return OCR3C; }

  //=== Write the compare registers. ====================================
  async command void CompareA.set(uint16_t t) { OCR3A = t; }
  async command void CompareB.set(uint16_t t) { OCR3B = t; }
  async command void CompareC.set(uint16_t t) { OCR3C = t; }

  //=== Read the capture registers. =====================================
  async command uint16_t Capture.get() { return ICR3; }

  //=== Write the capture registers. ====================================
  async command void Capture.set(uint16_t t)  { ICR3 = t; }

  //=== Timer interrupts signals ========================================
  default async event void CompareA.fired() { }
  AVR_NONATOMIC_HANDLER(SIG_OUTPUT_COMPARE3A) {
    signal CompareA.fired();
  }
  default async event void CompareB.fired() { }
  AVR_NONATOMIC_HANDLER(SIG_OUTPUT_COMPARE3B) {
    signal CompareB.fired();
  }
  default async event void CompareC.fired() { }
  AVR_NONATOMIC_HANDLER(SIG_OUTPUT_COMPARE3C) {
    signal CompareC.fired();
  }
  default async event void Capture.captured(uint16_t time) { }
  AVR_NONATOMIC_HANDLER(SIG_INPUT_CAPTURE3) {
    signal Capture.captured(call Timer.get());
  }
  default async event void Timer.overflow() { }
  AVR_NONATOMIC_HANDLER(SIG_OVERFLOW3) {
    signal Timer.overflow();
  }
}