📄 radioconfig.h
字号:
/*
* Copyright (c) 2009 Communication Group and Eislab at
* Lulea University of Technology
*
* Contact: Laurynas Riliskis, LTU
* Mail: laurynas.riliskis@ltu.se
* All rights reserved.
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
* - Neither the name of Communication Group at Lulea University of Technology
* nor the names of its contributors may be used to endorse or promote
* products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL STANFORD
* UNIVERSITY OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 2007, Vanderbilt University
* All rights reserved.
*
* Permission to use, copy, modify, and distribute this software and its
* documentation for any purpose, without fee, and without written agreement is
* hereby granted, provided that the above copyright notice, the following
* two paragraphs and the author appear in all copies of this software.
*
* IN NO EVENT SHALL THE VANDERBILT UNIVERSITY BE LIABLE TO ANY PARTY FOR
* DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
* OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF THE VANDERBILT
* UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* THE VANDERBILT UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
* AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
* ON AN "AS IS" BASIS, AND THE VANDERBILT UNIVERSITY HAS NO OBLIGATION TO
* PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
*
* Author: Miklos Maroti
*/
/**
* @author Henrik Makitaavola <henrik.makitaavola@gmail.com>
*/
#ifndef __RADIOCONFIG_H__
#define __RADIOCONFIG_H__
#include <RF230DriverLayer.h>
#include "Timer.h"
enum
{
/**
* This is the value of the TRX_CTRL_0 register
* which configures the output pin currents and the CLKM clock
*/
RF230_TRX_CTRL_0_VALUE = 0,
/**
* This is the default value of the CCA_MODE field in the PHY_CC_CCA register
* which is used to configure the default mode of the clear channel assessment
*/
RF230_CCA_MODE_VALUE = RF230_CCA_MODE_3,
/**
* This is the value of the CCA_THRES register that controls the
* energy levels used for clear channel assessment
*/
RF230_CCA_THRES_VALUE = 0xC7,
};
/* This is the default value of the TX_PWR field of the PHY_TX_PWR register. 0-15*/
#ifndef RF230_DEF_RFPOWER
#define RF230_DEF_RFPOWER 0
#endif
/* This is the default value of the CHANNEL field of the PHY_CC_CCA register. 11-26*/
#ifndef RF230_DEF_CHANNEL
#define RF230_DEF_CHANNEL 11
#endif
/*
* This is the command used to calculate the CRC for the RF230 chip.
* TODO: Check why the default crcByte implementation is in a different endianness
*/
inline uint16_t RF230_CRCBYTE_COMMAND(uint16_t crc, uint8_t data)
{
uint8_t lo8 = crc & 0x00FF;
uint8_t hi8 = (crc >> 8) & 0x00FF;
data ^= lo8; //lo8 (crc);
data ^= data << 4;
return ((((uint16_t)data << 8) | hi8 /*hi8 (crc)*/) ^ (uint8_t)(data >> 4)
^ ((uint16_t)data << 3));
}
/**
* This is the timer type of the radio alarm interface
*/
typedef TMicro TRadio;
/**
* The number of alarm ticks per one second
*/
#define RADIO_ALARM_SEC 2500000 // 20MHz / 8
#define RADIO_ALARM_MICROSEC 2.5// RADIO_ALARM_SEC/1000000
/**
* The base two logarithm of the number of radio alarm ticks per one millisecond
*/
#define RADIO_ALARM_MILLI_EXP 11
/**
* Make PACKET_LINK automaticaly enabled for Ieee154MessageC
*/
#if !defined(TFRAMES_ENABLED) && !defined(PACKET_LINK)
#define PACKET_LINK
#endif
#endif //__RADIOCONFIG_H__
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -