vehicle.h

51单片机C语言常用模块与综合系统设计实例精讲

/****************************************/
/* Copyright (c) 2004, 通信工程学院     */
/* All rights reserved.                 */                   
/****************************************/

#include <absacc.h>

unsigned char code QING[32]={
/* 请 */
0x20,0x22,0xEC,0x00,0x20,0x22,0xAA,0xAA,
0xAA,0xBF,0xAA,0xAA,0xEB,0xA2,0x20,0x00,
0x00,0x00,0x7F,0x20,0x10,0x00,0xFF,0x0A,
0x0A,0x0A,0x4A,0x8A,0x7F,0x00,0x00,0x00
};

unsigned char code CHA[32]={
/* 插 */
0x10,0x10,0x10,0xFF,0x90,0x24,0x24,0xA4,
0x24,0xFC,0x22,0x23,0x22,0xB0,0x20,0x00,
0x02,0x42,0x81,0x7F,0x00,0xFF,0x49,0x48,
0x40,0x7F,0x40,0x49,0x49,0xFF,0x01,0x00
};

unsigned char code KA[32]={
/* 卡 */
0x40,0x40,0x40,0x40,0x40,0x40,0xFF,0x44,
0x44,0x44,0x46,0x44,0x40,0x60,0x40,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,
0x02,0x04,0x0C,0x18,0x00,0x00,0x00,0x00
};

unsigned char code SHU[32]={
/* 输 */
0x88,0x68,0x1F,0xC8,0x0C,0x28,0x90,0xA8,
0xA6,0xA1,0x26,0x28,0x10,0xB0,0x10,0x00,
0x09,0x09,0x05,0xFF,0x05,0x00,0xFF,0x0A,
0x8A,0xFF,0x00,0x1F,0x80,0xFF,0x00,0x00
};

unsigned char code CHE[32]={
/* 车 */
0x00,0x04,0xC4,0xA4,0x94,0x8C,0x87,0xF4,
0x84,0x84,0xC4,0x84,0x06,0x04,0x00,0x00,
0x04,0x04,0x04,0x04,0x04,0x04,0x04,0xFF,
0x04,0x04,0x04,0x04,0x04,0x06,0x04,0x00
};

unsigned char code HAO[32]={
/* 号 */
0x80,0x80,0x80,0xBE,0xA2,0xA2,0xA2,0xA2,
0xA2,0xA2,0xA2,0xBF,0x82,0xC0,0x80,0x00,
0x00,0x00,0x00,0x04,0x06,0x05,0x04,0x04,
0x44,0x84,0x44,0x3E,0x04,0x00,0x00,0x00
};

unsigned char code ZHAN[32]={
/* 站 */
0x10,0xD0,0x12,0x1C,0x10,0xD0,0x10,0x00,
0x00,0xFF,0x08,0x08,0x08,0x8C,0x08,0x00,
0x20,0x60,0x27,0x10,0x1C,0x13,0x10,0xFF,
0x41,0x41,0x41,0x41,0x41,0xFF,0x01,0x00
};

unsigned char code SU[32]={
//速
0x40,0x42,0x44,0xCC,0x00,0xF4,0x94,0x94,
0x94,0xFF,0x94,0x94,0x94,0xF6,0x04,0x00,
0x00,0x40,0x20,0x1F,0x20,0x51,0x48,0x44,
0x42,0x7F,0x42,0x44,0x4C,0x61,0x20,0x00
};

unsigned char code DU[32]={
//度
0x00,0x00,0xFC,0x24,0x24,0x24,0xFC,0xA5,
0xA6,0xA4,0xFC,0x24,0x34,0x26,0x04,0x00,
0x40,0x20,0x9F,0x80,0x42,0x42,0x26,0x2A,
0x12,0x2A,0x26,0x42,0x40,0xC0,0x40,0x00
};

unsigned char code LI[32]={
//里
0x00,0x00,0xFE,0x12,0x12,0x12,0x12,0xFE,
0x12,0x12,0x12,0x12,0xFF,0x02,0x00,0x00,
0x40,0x48,0x49,0x49,0x49,0x49,0x49,0x7F,
0x49,0x49,0x49,0x49,0x4D,0x68,0x40,0x00
};

unsigned char code CHENG[32]={
//程
0x24,0x24,0xA4,0xFE,0xA3,0x22,0x20,0x7E,
0x42,0x42,0x42,0x42,0x42,0x7F,0x02,0x00,
0x08,0x06,0x01,0xFF,0x00,0x43,0x41,0x49,
0x49,0x49,0x7F,0x49,0x4D,0x69,0x41,0x00
};

unsigned char code ARAB[96]={
//阿拉伯数字
0x00,0x3e,0x51,0x49,0x45,0x3e,0x00,0x00,//0
0x00,0x00,0x42,0x7f,0x40,0x00,0x00,0x00,//1//1
0x00,0x42,0x61,0x51,0x49,0x46,0x00,0x00,//2//2
0x00,0x21,0x41,0x45,0x4b,0x31,0x00,0x00,//3//3
0x00,0x18,0x14,0x12,0x7f,0x10,0x00,0x00,//4//4
0x00,0x27,0x45,0x45,0x45,0x39,0x00,0x00,//5
0x00,0x3c,0x4a,0x49,0x49,0x30,0x00,0x00,//6
0x00,0x01,0x01,0x79,0x05,0x03,0x00,0x00,//7
0x00,0x36,0x49,0x49,0x49,0x36,0x00,0x00,//8
0x00,0x06,0x49,0x49,0x29,0x1e,0x00,0x00,//9
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//nop
0x00,0x00,0x60,0x60,0x00,0x00,0x00,0x00 //dot
};

#define LCD XBYTE[0xffff] /* LCD端口 */

#define TIME_SETTED XBYTE[0x7f0e]//ds12887 memory address 0x0e for time presetted flag
#define TIME_A XBYTE[0x7f0a]//ds12887 register a
#define TIME_B XBYTE[0x7f0b]
#define TIME_C XBYTE[0x7f0c]
#define TIME_LSTPGH XBYTE[0x7f0f]//last page high byte
#define TIME_LSTPGL XBYTE[0x7f10]//last page low byte
#define TIME_YEAR XBYTE[0x7f09]
#define TIME_MONTH XBYTE[0x7f08]
#define TIME_DAY XBYTE[0x7f07]
#define TIME_HOUR XBYTE[0x7f04]
#define TIME_MIN XBYTE[0x7f02]
#define TIME_SEC XBYTE[0x7f00]
#define TIME_FRNPGH XBYTE[0x7f11]
#define TIME_FRNPGL XBYTE[0x7f12]

// DataFlash chip select port pin (P1_4)
#define DF_CHIP_SELECT 0x10

// buffer 1 write 
#define BUFFER_1_WRITE 0x84

// buffer 2 write 
#define BUFFER_2_WRITE 0x87

// buffer 1 to main memory page program without built-in erase
#define B1_TO_MM_PAGE_PROG_WITHOUT_ERASE 0x88

// buffer 2 to main memory page program without built-in erase
#define B2_TO_MM_PAGE_PROG_WITHOUT_ERASE 0x89

//status register read
#define STAT_REG_READ 0xd7
//main memory page read
#define MAIN_MEMORY_PAGE_READ 0xd2