btext.c

microwindows移植到S3C44B0的源码

/*
 * BK Id: %F% %I% %G% %U% %#%
 */
/*
 * Procedures for drawing on the screen early on in the boot process.
 *
 * Benjamin Herrenschmidt <[e-mail]>
 */
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/version.h>

#include <asm/sections.h>
#include <asm/bootx.h>
#include <asm/btext.h>
#include <asm/prom.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/pgtable.h>
#include <asm/io.h>
#include <asm/processor.h>

#define NO_SCROLL

#ifndef NO_SCROLL
static void scrollscreen(void);
#endif

static void draw_byte(unsigned char c, long locX, long locY);
static void draw_byte_32(unsigned char *bits, unsigned long *base, int rb);
static void draw_byte_16(unsigned char *bits, unsigned long *base, int rb);
static void draw_byte_8(unsigned char *bits, unsigned long *base, int rb);

static int g_loc_X;
static int g_loc_Y;
static int g_max_loc_X;
static int g_max_loc_Y;

unsigned long disp_BAT[2] __initdata = {0, 0};

#define cmapsz	(16*256)

static unsigned char vga_font[cmapsz];

int boot_text_mapped;

boot_infos_t disp_bi;

extern char *klimit;

/*
 * Powermac can use btext_* after boot for xmon,
 * chrp only uses it during early boot.
 */
#ifdef CONFIG_XMON
#define BTEXT	__pmac
#define BTDATA	__pmacdata
#else
#define BTEXT	__init
#define BTDATA	__initdata
#endif /* CONFIG_XMON */

/*
 * This is called only when we are booted via BootX.
 */
void __init
btext_init(boot_infos_t *bi)
{
	g_loc_X = 0;
	g_loc_Y = 0;
	g_max_loc_X = (bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) / 8;
	g_max_loc_Y = (bi->dispDeviceRect[3] - bi->dispDeviceRect[1]) / 16;
	disp_bi = *bi;
	boot_text_mapped = 1;
}

void __init
btext_welcome(void)
{
	unsigned long flags;
	unsigned long pvr;
	boot_infos_t* bi = &disp_bi;

	btext_drawstring("Welcome to Linux, kernel " UTS_RELEASE "\n");
	btext_drawstring("\nlinked at        : 0x");
	btext_drawhex(KERNELBASE);
	btext_drawstring("\nframe buffer at  : 0x");
	btext_drawhex((unsigned long)bi->dispDeviceBase);
	btext_drawstring(" (phys), 0x");
	btext_drawhex((unsigned long)bi->logicalDisplayBase);
	btext_drawstring(" (log)");
	btext_drawstring("\nklimit           : 0x");
	btext_drawhex((unsigned long)klimit);
	btext_drawstring("\nMSR              : 0x");
	__asm__ __volatile__ ("mfmsr %0" : "=r" (flags));
	btext_drawhex(flags);
	__asm__ __volatile__ ("mfspr %0, 287" : "=r" (pvr));
	pvr >>= 16;
	if (pvr > 1) {
	    btext_drawstring("\nHID0             : 0x");
	    __asm__ __volatile__ ("mfspr %0, 1008" : "=r" (flags));
	    btext_drawhex(flags);
	}
	if (pvr == 8 || pvr == 12 || pvr == 0x800c) {
	    btext_drawstring("\nICTC             : 0x");
	    __asm__ __volatile__ ("mfspr %0, 1019" : "=r" (flags));
	    btext_drawhex(flags);
	}
	btext_drawstring("\n\n");
}

/* Calc BAT values for mapping the display and store them
 * in disp_BAT.  Those values are then used from head.S to map
 * the display during identify_machine() and MMU_Init()
 * 
 * The display is mapped to virtual address 0xD0000000, rather
 * than 1:1, because some some CHRP machines put the frame buffer
 * in the region starting at 0xC0000000 (KERNELBASE).
 * This mapping is temporary and will disappear as soon as the
 * setup done by MMU_Init() is applied.
 * 
 * For now, we align the BAT and then map 8Mb on 601 and 16Mb
 * on other PPCs. This may cause trouble if the framebuffer
 * is really badly aligned, but I didn't encounter this case
 * yet.
 */
void __init
btext_prepare_BAT(void)
{
	boot_infos_t* bi = &disp_bi;
	unsigned long vaddr = KERNELBASE + 0x10000000;
	unsigned long addr;
	unsigned long lowbits;

	addr = (unsigned long)bi->dispDeviceBase;
	if (!addr) {
		boot_text_mapped = 0;
		return;
	}
	if (PVR_VER(mfspr(PVR)) != 1) {
		/* 603, 604, G3, G4, ... */
		lowbits = addr & ~0xFF000000UL;
		addr &= 0xFF000000UL;
		disp_BAT[0] = vaddr | (BL_16M<<2) | 2;
		disp_BAT[1] = addr | (_PAGE_NO_CACHE | _PAGE_GUARDED | BPP_RW);		
	} else {
		/* 601 */
		lowbits = addr & ~0xFF800000UL;
		addr &= 0xFF800000UL;
		disp_BAT[0] = vaddr | (_PAGE_NO_CACHE | PP_RWXX) | 4;
		disp_BAT[1] = addr | BL_8M | 0x40;
	}
	bi->logicalDisplayBase = (void *) (vaddr + lowbits);
}

/* This function will enable the early boot text when doing OF booting. This
 * way, xmon output should work too
 */
void __init
btext_setup_display(int width, int height, int depth, int pitch,
		    unsigned long address)
{
	boot_infos_t* bi = &disp_bi;

	g_loc_X = 0;
	g_loc_Y = 0;
	g_max_loc_X = width / 8;
	g_max_loc_Y = height / 16;
	bi->logicalDisplayBase = (unsigned char *)address;
	bi->dispDeviceBase = (unsigned char *)address;
	bi->dispDeviceRowBytes = pitch;
	bi->dispDeviceDepth = depth;
	bi->dispDeviceRect[0] = bi->dispDeviceRect[1] = 0;
	bi->dispDeviceRect[2] = width;
	bi->dispDeviceRect[3] = height;
	boot_text_mapped = 1;
}

/* Here's a small text engine to use during early boot
 * or for debugging purposes
 * 
 * todo:
 * 
 *  - build some kind of vgacon with it to enable early printk
 *  - move to a separate file
 *  - add a few video driver hooks to keep in sync with display
 *    changes.
 */

void __openfirmware
map_boot_text(void)
{
	unsigned long base, offset, size;
	boot_infos_t *bi = &disp_bi;

	if (bi->dispDeviceBase == 0)
		return;
	base = ((unsigned long) bi->dispDeviceBase) & 0xFFFFF000UL;
	offset = ((unsigned long) bi->dispDeviceBase) - base;
	size = bi->dispDeviceRowBytes * bi->dispDeviceRect[3] + offset
		+ bi->dispDeviceRect[0];
	bi->logicalDisplayBase = ioremap(base, size);
	if (bi->logicalDisplayBase == 0)
		return;
	bi->logicalDisplayBase += offset;
	boot_text_mapped = 1;
}

/* Calc the base address of a given point (x,y) */
static unsigned char * BTEXT
calc_base(boot_infos_t *bi, int x, int y)
{
	unsigned char *base;

	base = bi->logicalDisplayBase;
	if (base == 0)
		base = bi->dispDeviceBase;
	base += (x + bi->dispDeviceRect[0]) * (bi->dispDeviceDepth >> 3);
	base += (y + bi->dispDeviceRect[1]) * bi->dispDeviceRowBytes;
	return base;
}

/* Adjust the display to a new resolution */
void
btext_update_display(unsigned long phys, int width, int height,
		     int depth, int pitch)
{
	boot_infos_t *bi = &disp_bi;

	if (bi->dispDeviceBase == 0)
		return;

	/* check it's the same frame buffer (within 256MB) */
	if ((phys ^ (unsigned long)bi->dispDeviceBase) & 0xf0000000)
		return;

	bi->dispDeviceBase = (__u8 *) phys;
	bi->dispDeviceRect[0] = 0;
	bi->dispDeviceRect[1] = 0;
	bi->dispDeviceRect[2] = width;
	bi->dispDeviceRect[3] = height;
	bi->dispDeviceDepth = depth;
	bi->dispDeviceRowBytes = pitch;
	if (boot_text_mapped) {
		iounmap(bi->logicalDisplayBase);
		boot_text_mapped = 0;
	}
	map_boot_text();
	g_loc_X = 0;
	g_loc_Y = 0;
	g_max_loc_X = width / 8;
	g_max_loc_Y = height / 16;
}

void BTEXT btext_clearscreen(void)
{
	boot_infos_t* bi	= &disp_bi;
	unsigned long *base	= (unsigned long *)calc_base(bi, 0, 0);
	unsigned long width 	= ((bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) *
					(bi->dispDeviceDepth >> 3)) >> 2;
	int i,j;
	
	for (i=0; i<(bi->dispDeviceRect[3] - bi->dispDeviceRect[1]); i++)
	{
		unsigned long *ptr = base;
		for(j=width; j; --j)
			*(ptr++) = 0;
		base += (bi->dispDeviceRowBytes >> 2);
	}
}

__inline__ void dcbst(const void* addr)
{
	__asm__ __volatile__ ("dcbst 0,%0" :: "r" (addr));
}

void BTEXT btext_flushscreen(void)
{
	boot_infos_t* bi	= &disp_bi;
	unsigned long *base	= (unsigned long *)calc_base(bi, 0, 0);
	unsigned long width 	= ((bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) *
					(bi->dispDeviceDepth >> 3)) >> 2;
	int i,j;
	
	for (i=0; i<(bi->dispDeviceRect[3] - bi->dispDeviceRect[1]); i++)