smp.c

microwindows移植到S3C44B0的源码

void smp_message_recv(int msg, struct pt_regs *regs)
{
	atomic_inc(&ipi_recv);
	
	switch( msg ) {
	case PPC_MSG_CALL_FUNCTION:
		smp_call_function_interrupt();
		break;
	case PPC_MSG_RESCHEDULE: 
		current->need_resched = 1;
		break;
#ifdef CONFIG_XMON
	case PPC_MSG_XMON_BREAK:
		xmon(regs);
		break;
#endif /* CONFIG_XMON */
#ifdef CONFIG_KDB
	case PPC_MSG_XMON_BREAK:
	        /* This isn't finished yet, obviously -TAI */
		kdb(KDB_REASON_KEYBOARD,0, (kdb_eframe_t) regs);
		break;
#endif
	default:
		printk("SMP %d: smp_message_recv(): unknown msg %d\n",
		       smp_processor_id(), msg);
		break;
	}
}

void smp_send_reschedule(int cpu)
{
	smp_message_pass(cpu, PPC_MSG_RESCHEDULE, 0, 0);
}

#ifdef CONFIG_XMON
void smp_send_xmon_break(int cpu)
{
	smp_message_pass(cpu, PPC_MSG_XMON_BREAK, 0, 0);
}
#endif /* CONFIG_XMON */

static void stop_this_cpu(void *dummy)
{
	__cli();
	while (1)
		;
}

void smp_send_stop(void)
{
	smp_call_function(stop_this_cpu, NULL, 1, 0);
	smp_num_cpus = 1;
}

/*
 * Structure and data for smp_call_function(). This is designed to minimise
 * static memory requirements. It also looks cleaner.
 * Stolen from the i386 version.
 */
static spinlock_t call_lock __cacheline_aligned_in_smp = SPIN_LOCK_UNLOCKED;

static struct call_data_struct {
	void (*func) (void *info);
	void *info;
	atomic_t started;
	atomic_t finished;
	int wait;
} *call_data;

/*
 * This function sends a 'generic call function' IPI to all other CPUs
 * in the system.
 *
 * [SUMMARY] Run a function on all other CPUs.
 * <func> The function to run. This must be fast and non-blocking.
 * <info> An arbitrary pointer to pass to the function.
 * <nonatomic> currently unused.
 * <wait> If true, wait (atomically) until function has completed on other CPUs.
 * [RETURNS] 0 on success, else a negative status code. Does not return until
 * remote CPUs are nearly ready to execute <<func>> or are or have executed.
 *
 * You must not call this function with disabled interrupts or from a
 * hardware interrupt handler, you may call it from a bottom half handler.
 */
int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
			int wait)

{ 
	struct call_data_struct data;
	int ret = -1, cpus = smp_num_cpus-1;
	int timeout;

	if (!cpus)
		return 0;

	data.func = func;
	data.info = info;
	atomic_set(&data.started, 0);
	data.wait = wait;
	if (wait)
		atomic_set(&data.finished, 0);

	spin_lock_bh(&call_lock);
	call_data = &data;
	/* Send a message to all other CPUs and wait for them to respond */
	smp_message_pass(MSG_ALL_BUT_SELF, PPC_MSG_CALL_FUNCTION, 0, 0);

	/* Wait for response */
	timeout = 8000000;
	while (atomic_read(&data.started) != cpus) {
		HMT_low();
		if (--timeout == 0) {
			printk("smp_call_function on cpu %d: other cpus not responding (%d)\n",
			       smp_processor_id(), atomic_read(&data.started));
#ifdef CONFIG_XMON
                        xmon(0);
#endif
#ifdef CONFIG_PPC_ISERIES
			HvCall_terminateMachineSrc();
#endif
			goto out;
		}
		barrier();
		udelay(1);
	}

	if (wait) {
		timeout = 1000000;
		while (atomic_read(&data.finished) != cpus) {
			HMT_low();
			if (--timeout == 0) {
				printk("smp_call_function on cpu %d: other cpus not finishing (%d/%d)\n",
				       smp_processor_id(), atomic_read(&data.finished), atomic_read(&data.started));
#ifdef CONFIG_PPC_ISERIES
				HvCall_terminateMachineSrc();
#endif
				goto out;
			}
			barrier();
			udelay(1);
		}
	}
	ret = 0;

 out:
	HMT_medium();
	spin_unlock_bh(&call_lock);
	return ret;
}

void smp_call_function_interrupt(void)
{
	void (*func) (void *info) = call_data->func;
	void *info = call_data->info;
	int wait = call_data->wait;

	/*
	 * Notify initiating CPU that I've grabbed the data and am
	 * about to execute the function
	 */
	atomic_inc(&call_data->started);
	/*
	 * At this point the info structure may be out of scope unless wait==1
	 */
	(*func)(info);
	if (wait)
		atomic_inc(&call_data->finished);
}

extern unsigned long decr_overclock;

void __init smp_boot_cpus(void)
{
	extern struct current_set_struct current_set[];
	extern void __secondary_start_chrp(void);
	int i, cpu_nr;
	struct task_struct *p;
	unsigned long sp;

	printk("Entering SMP Mode...\n");
	PPCDBG(PPCDBG_SMP, "smp_boot_cpus: start.  NR_CPUS = 0x%lx\n", NR_CPUS);

	smp_num_cpus = 1;
        smp_store_cpu_info(0);
	cpu_online_map = 1UL;

	/*
	 * assume for now that the first cpu booted is
	 * cpu 0, the master -- Cort
	 */
	cpu_callin_map[0] = 1;
	current->processor = 0;

	init_idle();

	for (i = 0; i < NR_CPUS; i++) {
		paca[i].prof_counter=1;
		paca[i].prof_multiplier = 1;
		if(i != 0) {
		        /*
			 * Processor 0's segment table is statically 
			 * initialized to real address 0x5000.  The
			 * Other processor's tables are created and
			 * initialized here.
			 */
			paca[i].xStab_data.virt = (unsigned long)&stab_array[PAGE_SIZE * (i-1)];
			memset((void *)paca[i].xStab_data.virt, 0, PAGE_SIZE); 
			paca[i].xStab_data.real = __v2a(paca[i].xStab_data.virt);
			paca[i].default_decr = tb_ticks_per_jiffy / decr_overclock;
		}
	}

	/*
	 * XXX very rough, assumes 20 bus cycles to read a cache line,
	 * timebase increments every 4 bus cycles, 32kB L1 data cache.
	 */
	cacheflush_time = 5 * 1024;

	/* Probe arch for CPUs */
	cpu_nr = ppc_md.smp_probe();

	printk("Probe found %d CPUs\n", cpu_nr);

	/*
	 * only check for cpus we know exist.  We keep the callin map
	 * with cpus at the bottom -- Cort
	 */
	if (cpu_nr > max_cpus)
		cpu_nr = max_cpus;

#ifdef CONFIG_ISERIES
	smp_space_timers( cpu_nr );
#endif

	printk("Waiting for %d CPUs\n", cpu_nr-1);

	for ( i = 1 ; i < cpu_nr; i++ ) {
		int c;
		struct pt_regs regs;
		
		/* create a process for the processor */
		/* we don't care about the values in regs since we'll
		   never reschedule the forked task. */
		/* We DO care about one bit in the pt_regs we
		   pass to do_fork.  That is the MSR_FP bit in
		   regs.msr.  If that bit is on, then do_fork
		   (via copy_thread) will call giveup_fpu.
		   giveup_fpu will get a pointer to our (current's)
		   last register savearea via current->thread.regs
		   and using that pointer will turn off the MSR_FP,
		   MSR_FE0 and MSR_FE1 bits.  At this point, this
		   pointer is pointing to some arbitrary point within
		   our stack */

		memset(&regs, 0, sizeof(struct pt_regs));

		if (do_fork(CLONE_VM|CLONE_PID, 0, &regs, 0) < 0)
			panic("failed fork for CPU %d", i);
		p = init_task.prev_task;
		if (!p)
			panic("No idle task for CPU %d", i);

		PPCDBG(PPCDBG_SMP,"\tProcessor %d, task = 0x%lx\n", i, p);

		del_from_runqueue(p);
		unhash_process(p);
		init_tasks[i] = p;

		p->processor = i;
		p->cpus_runnable = 1 << i; /* we schedule the first task manually */
		current_set[i].task = p;
		sp = ((unsigned long)p) + sizeof(union task_union)
			- STACK_FRAME_OVERHEAD;
		current_set[i].sp_real = (void *)__v2a(sp);

		/* wake up cpus */
		ppc_md.smp_kick_cpu(i);

		/*
		 * wait to see if the cpu made a callin (is actually up).
		 * use this value that I found through experimentation.
		 * -- Cort
		 */
		for ( c = 5000; c && !cpu_callin_map[i] ; c-- ) {
			udelay(100);
		}
		
		if ( cpu_callin_map[i] )
		{
			printk("Processor %d found.\n", i);
			PPCDBG(PPCDBG_SMP, "\tProcessor %d found.\n", i);
			/* this sync's the decr's -- Cort */
			smp_num_cpus++;
		} else {
			printk("Processor %d is stuck.\n", i);
			PPCDBG(PPCDBG_SMP, "\tProcessor %d is stuck.\n", i);
		}
	}

	/* Setup CPU 0 last (important) */
	ppc_md.smp_setup_cpu(0);
	
	if (smp_num_cpus < 2) {
	        tb_last_stamp = get_tb();
		smp_tb_synchronized = 1;
	}
}

void __init smp_commence(void)
{
	/*
	 *	Lets the callin's below out of their loop.
	 */
	PPCDBG(PPCDBG_SMP, "smp_commence: start\n"); 
	wmb();
	smp_commenced = 1;
}

void __init smp_callin(void)
{
	int cpu = current->processor;
	
        smp_store_cpu_info(cpu);
	set_dec(paca[cpu].default_decr);
	cpu_callin_map[cpu] = 1;

	ppc_md.smp_setup_cpu(cpu);

	init_idle();

	set_bit(smp_processor_id(), &cpu_online_map);
	
	while(!smp_commenced) {
		barrier();
	}
	__sti();
}

/* intel needs this */
void __init initialize_secondary(void)
{
}

/* Activate a secondary processor. */
int start_secondary(void *unused)
{
	int cpu; 

	cpu = current->processor;
	atomic_inc(&init_mm.mm_count);
	current->active_mm = &init_mm;
	smp_callin();

	/* Go into the idle loop. */
	return cpu_idle(NULL);
}

void __init smp_setup(char *str, int *ints)
{
}

int __init setup_profiling_timer(unsigned int multiplier)
{
	return 0;
}

/* this function is called for each processor
 */
void __init smp_store_cpu_info(int id)
{
        paca[id].pvr = _get_PVR();
}

static int __init maxcpus(char *str)
{
	get_option(&str, &max_cpus);
	return 1;
}

__setup("maxcpus=", maxcpus);