pm.c

microwindows移植到S3C44B0的源码

/*
 * SA1100 Power Management Routines
 *
 * Copyright (c) 2001 Cliff Brake <[e-mail]>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License.
 *
 * History:
 *
 * 2001-02-06:	Cliff Brake         Initial code
 *
 * 2001-02-25:	Sukjae Cho <[e-mail]> &
 * 		Chester Kuo <[e-mail]>
 * 			Save more value for the resume function! Support
 * 			Bitsy/Assabet/Freebird board
 *
 * 2001-08-29:	Nicolas Pitre <[e-mail]>
 * 			Cleaned up, pushed platform dependent stuff
 * 			in the platform specific files.
 */
#include <linux/config.h>
#include <linux/init.h>
#include <linux/pm.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/sysctl.h>
#include <linux/errno.h>

#include <asm/hardware.h>
#include <asm/memory.h>
#include <asm/system.h>
#include <asm/leds.h>

#include "sleep.h"

/*
 * Debug macros
 */
#undef DEBUG

extern void sa1100_cpu_suspend(void);
extern void sa1100_cpu_resume(void);

extern unsigned long *sleep_save;	/* virtual address */
extern unsigned long  sleep_save_p;	/* physical address */

#define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
#define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]

int pm_do_suspend(void)
{
	/* set up pointer to sleep parameters */
	sleep_save = kmalloc(SLEEP_SAVE_SIZE*sizeof(long), GFP_ATOMIC);
	if (!sleep_save)
		return -ENOMEM;

	sleep_save_p = virt_to_phys(sleep_save);

	cli();

	leds_event(led_stop);

	/* preserve current time */
	RCNR = xtime.tv_sec;

	/* save vital registers */
	SAVE(OSCR);
	SAVE(OSMR0);
	SAVE(OSMR1);
	SAVE(OSMR2);
	SAVE(OSMR3);
	SAVE(OIER);

	SAVE(GPDR);
	SAVE(GRER);
	SAVE(GFER);
	SAVE(GAFR);

	SAVE(PPDR);
	SAVE(PPSR);
	SAVE(PPAR);
	SAVE(PSDR);

	SAVE(Ser1SDCR0);

	SAVE(ICMR);

	/* ... maybe a global variable initialized by arch code to set this? */
	GRER = PWER;
	GFER = 0;
	GEDR = GEDR;

	/* Clear previous reset status */
	RCSR = RCSR_HWR | RCSR_SWR | RCSR_WDR | RCSR_SMR;

	/* set resume return address */
	PSPR = virt_to_phys(sa1100_cpu_resume);

	/* go zzz */
	sa1100_cpu_suspend();

	/* ensure not to come back here if it wasn't intended */
	PSPR = 0;

#ifdef DEBUG
	printk(KERN_DEBUG "*** made it back from resume\n");
#endif

	/* restore registers */
	RESTORE(GPDR);
	RESTORE(GRER);
	RESTORE(GFER);
	RESTORE(GAFR);

	/* clear any edge detect bit */
	GEDR = GEDR;

	RESTORE(PPDR);
	RESTORE(PPSR);
	RESTORE(PPAR);
	RESTORE(PSDR);

	RESTORE(Ser1SDCR0);

	PSSR = PSSR_PH;

	RESTORE(OSMR0);
	RESTORE(OSMR1);
	RESTORE(OSMR2);
	RESTORE(OSMR3);
	RESTORE(OSCR);
	RESTORE(OIER);

	ICLR = 0;
	ICCR = 1;
	RESTORE(ICMR);

	/* restore current time */
	xtime.tv_sec = RCNR;

	leds_event(led_start);

	sti();

	kfree (sleep_save);

	/*
	 * Restore the CPU frequency settings.
	 */
#ifdef CONFIG_CPU_FREQ
	cpufreq_restore();
#endif

	return 0;
}

#ifdef CONFIG_SYSCTL
/*
 * ARGH!  ACPI people defined CTL_ACPI in linux/acpi.h rather than
 * linux/sysctl.h.
 *
 * This means our interface here won't survive long - it needs a new
 * interface.  Quick hack to get this working - use sysctl id 9999.
 */
#warning ACPI broke the kernel, this interface needs to be fixed up.
#define CTL_ACPI 9999
#define ACPI_S1_SLP_TYP 19

/*
 * Send us to sleep.
 */
static int sysctl_pm_do_suspend(void)
{
	int retval;

	retval = pm_send_all(PM_SUSPEND, (void *)3);

	if (retval == 0) {
		retval = pm_do_suspend();

		pm_send_all(PM_RESUME, (void *)0);
	}

	return retval;
}

static struct ctl_table pm_table[] =
{
	{ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, (proc_handler *)&sysctl_pm_do_suspend},
	{0}
};

static struct ctl_table pm_dir_table[] =
{
	{CTL_ACPI, "pm", NULL, 0, 0555, pm_table},
	{0}
};

/*
 * Initialize power interface
 */
static int __init pm_init(void)
{
	register_sysctl_table(pm_dir_table, 1);
	return 0;
}

__initcall(pm_init);

#endif