⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 config.c

📁 microwindows移植到S3C44B0的源码
💻 C
字号:
/***************************************************************************//* *	linux/arch/m68knommu/platform/5407/config.c * *	Copyright (C) 1999, Greg Ungerer (gerg@snapgear.com) *	Copyright (C) 2000, Lineo (www.lineo.com) *//***************************************************************************/#include <linux/config.h>#include <linux/kernel.h>#include <linux/sched.h>#include <linux/param.h>#include <linux/init.h>#include <asm/irq.h>#include <asm/dma.h>#include <asm/traps.h>#include <asm/machdep.h>#include <asm/coldfire.h>#include <asm/mcftimer.h>#include <asm/mcfsim.h>#include <asm/mcfdma.h>#include <asm/delay.h>/***************************************************************************/void	coldfire_profile_init(void);/***************************************************************************//* *	DMA channel base address table. */unsigned int   dma_base_addr[MAX_DMA_CHANNELS] = {        MCF_MBAR + MCFDMA_BASE0,        MCF_MBAR + MCFDMA_BASE1,        MCF_MBAR + MCFDMA_BASE2,        MCF_MBAR + MCFDMA_BASE3,};unsigned int dma_device_address[MAX_DMA_CHANNELS];/***************************************************************************/void coldfire_tick(void){	volatile unsigned char	*timerp;	/* Reset the ColdFire timer */	timerp = (volatile unsigned char *) (MCF_MBAR + MCFTIMER_BASE1);	timerp[MCFTIMER_TER] = MCFTIMER_TER_CAP | MCFTIMER_TER_REF;}/***************************************************************************/void coldfire_timer_init(void (*handler)(int, void *, struct pt_regs *)){	volatile unsigned short	*timerp;	volatile unsigned char	*icrp;	/* Set up TIMER 1 as poll clock */	timerp = (volatile unsigned short *) (MCF_MBAR + MCFTIMER_BASE1);	timerp[MCFTIMER_TMR] = MCFTIMER_TMR_DISABLE;	timerp[MCFTIMER_TRR] = (unsigned short) ((MCF_CLK / 16) / HZ);	timerp[MCFTIMER_TMR] = MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE;	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_TIMER1ICR);#if defined(CONFIG_CLEOPATRA)	*icrp = MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3;	request_irq(30, handler, SA_INTERRUPT, "ColdFire Timer", NULL);#else	*icrp = MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI3;	request_irq(29, handler, SA_INTERRUPT, "ColdFire Timer", NULL);#endif#ifdef CONFIG_HIGHPROFILE	coldfire_profile_init();#endif	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_TIMER1);}/***************************************************************************/#ifdef CONFIG_HIGHPROFILE/***************************************************************************/#define	PROFILEHZ	1013/* *	Use the other timer to provide high accuracy profiling info. */void coldfire_profile_tick(int irq, void *dummy, struct pt_regs *regs){	volatile unsigned char	*timerp;	/* Reset the ColdFire timer2 */	timerp = (volatile unsigned char *) (MCF_MBAR + MCFTIMER_BASE2);	timerp[MCFTIMER_TER] = MCFTIMER_TER_CAP | MCFTIMER_TER_REF;        if (!user_mode(regs)) {                if (prof_buffer && current->pid) {                        extern int _stext;                        unsigned long ip = instruction_pointer(regs);                        ip -= (unsigned long) &_stext;                        ip >>= prof_shift;                        if (ip < prof_len)                                prof_buffer[ip]++;                }        }}void coldfire_profile_init(void){	volatile unsigned short	*timerp;	volatile unsigned char	*icrp;	printk("PROFILE: lodging timer2=%d as profile timer\n", PROFILEHZ);	/* Set up TIMER 2 as poll clock */	timerp = (volatile unsigned short *) (MCF_MBAR + MCFTIMER_BASE2);	timerp[MCFTIMER_TMR] = MCFTIMER_TMR_DISABLE;	timerp[MCFTIMER_TRR] = (unsigned short) ((MCF_CLK / 16) / PROFILEHZ);	timerp[MCFTIMER_TMR] = MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE;	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_TIMER2ICR);	*icrp = MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3;	request_irq(31, coldfire_profile_tick, (SA_INTERRUPT | IRQ_FLG_FAST),		"Profile Timer", NULL);	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_TIMER2);}/***************************************************************************/#endif	/* CONFIG_HIGHPROFILE *//***************************************************************************//* *	Program the vector to be an auto-vectored. */void mcf_autovector(unsigned int vec){	volatile unsigned char  *mbar;	if ((vec >= 25) && (vec <= 31)) {		mbar = (volatile unsigned char *) MCF_MBAR;		vec = 0x1 << (vec - 24);		*(mbar + MCFSIM_AVR) |= vec;		mcf_setimr(mcf_getimr() & ~vec);	}}/***************************************************************************/extern e_vector	*_ramvec;void set_evector(int vecnum, void (*handler)(void)){	if (vecnum >= 0 && vecnum <= 255)		_ramvec[vecnum] = handler;}/***************************************************************************//* assembler routines */asmlinkage void buserr(void);asmlinkage void trap(void);asmlinkage void system_call(void);asmlinkage void inthandler(void);void __init coldfire_trap_init(void){	int i;#ifndef ENABLE_dBUG	mcf_setimr(MCFSIM_IMR_MASKALL);#endif	/*	 *	There is a common trap handler and common interrupt	 *	handler that handle almost every vector. We treat	 *	the system call and bus error special, they get their	 *	own first level handlers.	 */#ifndef ENABLE_dBUG	for (i = 3; (i <= 23); i++)		_ramvec[i] = trap;	for (i = 33; (i <= 63); i++)		_ramvec[i] = trap;#endif	for (i = 24; (i <= 30); i++)		_ramvec[i] = inthandler;#ifndef ENABLE_dBUG	_ramvec[31] = inthandler;  // Disables the IRQ7 button#endif	for (i = 64; (i < 255); i++)		_ramvec[i] = inthandler;	_ramvec[255] = 0;	_ramvec[2] = buserr;	_ramvec[32] = system_call;}/***************************************************************************//* *	Generic dumping code. Used for panic and debug. */void dump(struct pt_regs *fp){	extern unsigned int sw_usp, sw_ksp;	unsigned long	*sp;	unsigned char	*tp;	int		i;	printk("\nCURRENT PROCESS:\n\n");	printk("COMM=%s PID=%d\n", current->comm, current->pid);	if (current->mm) {		printk("TEXT=%08x-%08x DATA=%08x-%08x BSS=%08x-%08x\n",			(int) current->mm->start_code,			(int) current->mm->end_code,			(int) current->mm->start_data,			(int) current->mm->end_data,			(int) current->mm->end_data,			(int) current->mm->brk);		printk("USER-STACK=%08x  KERNEL-STACK=%08x\n\n",			(int) current->mm->start_stack,			(int) (((unsigned long) current) + 2 * PAGE_SIZE));	}	printk("PC: %08lx\n", fp->pc);	printk("SR: %08lx    SP: %08lx\n", (long) fp->sr, (long) fp);	printk("d0: %08lx    d1: %08lx    d2: %08lx    d3: %08lx\n",		fp->d0, fp->d1, fp->d2, fp->d3);	printk("d4: %08lx    d5: %08lx    a0: %08lx    a1: %08lx\n",		fp->d4, fp->d5, fp->a0, fp->a1);	printk("\nUSP: %08x   KSP: %08x   TRAPFRAME: %08x\n",		sw_usp, sw_ksp, (unsigned int) fp);	printk("\nCODE:");	tp = ((unsigned char *) fp->pc) - 0x20;	for (sp = (unsigned long *) tp, i = 0; (i < 0x40);  i += 4) {		if ((i % 0x10) == 0)			printk("\n%08x: ", (int) (tp + i));		printk("%08x ", (int) *sp++);	}	printk("\n");	printk("\nKERNEL STACK:");	tp = ((unsigned char *) fp) - 0x40;	for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {		if ((i % 0x10) == 0)			printk("\n%08x: ", (int) (tp + i));		printk("%08x ", (int) *sp++);	}	printk("\n");	printk("\nUSER STACK:");	tp = (unsigned char *) (sw_usp - 0x10);	for (sp = (unsigned long *) tp, i = 0; (i < 0x80); i += 4) {		if ((i % 0x10) == 0)			printk("\n%08x: ", (int) (tp + i));		printk("%08x ", (int) *sp++);	}	printk("\n\n");}/***************************************************************************/void config_BSP(char *commandp, int size){	memset(commandp, 0, size);	mach_sched_init = coldfire_timer_init;	mach_tick = coldfire_tick;	mach_trap_init = coldfire_trap_init;}/***************************************************************************/#ifdef TRAP_DBG_INTERRUPTasmlinkage void dbginterrupt_c(struct frame *fp){	extern void dump(struct pt_regs *fp);	printk("%s(%d): BUS ERROR TRAP\n", __FILE__, __LINE__);        dump((struct pt_regs *) fp);	asm("halt");}#endif/***************************************************************************/

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -