📄 time.c
字号:
/* * Carsten Langgaard, carstenl@mips.com * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. * * ######################################################################## * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as * published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. * * ######################################################################## * * Setting up the clock on the MIPS boards. * */#include <linux/config.h>#include <linux/init.h>#include <linux/kernel_stat.h>#include <linux/sched.h>#include <linux/spinlock.h>#include <linux/mc146818rtc.h>#include <linux/timex.h>#include <asm/mipsregs.h>#include <asm/ptrace.h>#include <asm/it8172/it8172_int.h>#include <asm/debug.h>static unsigned long r4k_offset; /* Amount to increment compare reg each time */static unsigned long r4k_cur; /* What counter should be at next timer irq */extern unsigned int mips_counter_frequency;extern asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs);/* * Figure out the r4k offset, the amount to increment the compare * register for each time tick. * Use the RTC to calculate offset. */static unsigned long __init cal_r4koff(void){ unsigned int flags; __save_and_cli(flags); /* Start counter exactly on falling edge of update flag */ while (CMOS_READ(RTC_REG_A) & RTC_UIP); while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); /* Start r4k counter. */ write_32bit_cp0_register(CP0_COUNT, 0); /* Read counter exactly on falling edge of update flag */ while (CMOS_READ(RTC_REG_A) & RTC_UIP); while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); mips_counter_frequency = read_32bit_cp0_register(CP0_COUNT); /* restore interrupts */ __restore_flags(flags); return (mips_counter_frequency / HZ);}unsigned long it8172_rtc_get_time(void){ unsigned int year, mon, day, hour, min, sec; unsigned char save_control; save_control = CMOS_READ(RTC_CONTROL); /* Freeze it. */ CMOS_WRITE(save_control | RTC_SET, RTC_CONTROL); /* Read regs. */ sec = CMOS_READ(RTC_SECONDS); min = CMOS_READ(RTC_MINUTES); hour = CMOS_READ(RTC_HOURS); if (!(save_control & RTC_24H)) { if ((hour & 0xf) == 0xc) hour &= 0x80; if (hour & 0x80) hour = (hour & 0xf) + 12; } day = CMOS_READ(RTC_DAY_OF_MONTH); mon = CMOS_READ(RTC_MONTH); year = CMOS_READ(RTC_YEAR); /* Unfreeze clock. */ CMOS_WRITE(save_control, RTC_CONTROL); if ((year += 1900) < 1970) year += 100; return mktime(year, mon, day, hour, min, sec);}void __init it8172_time_init(void){ unsigned int est_freq, flags; __save_and_cli(flags); /* Set Data mode - binary. */ CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL); printk("calculating r4koff... "); r4k_offset = cal_r4koff(); printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset); est_freq = 2*r4k_offset*HZ; est_freq += 5000; /* round */ est_freq -= est_freq%10000; printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, (est_freq%1000000)*100/1000000); __restore_flags(flags);}#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)void __init it8172_timer_setup(struct irqaction *irq){ puts("timer_setup\n"); put32(NR_IRQS); puts(""); /* we are using the cpu counter for timer interrupts */ setup_irq(MIPS_CPU_TIMER_IRQ, irq); /* to generate the first timer interrupt */ r4k_cur = (read_32bit_cp0_register(CP0_COUNT) + r4k_offset); write_32bit_cp0_register(CP0_COMPARE, r4k_cur); set_cp0_status(ALLINTS);}void local_timer_interrupt(struct pt_regs *regs){ do_IRQ(MIPS_CPU_TIMER_IRQ, regs);}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -