⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 pci_ops.c

📁 microwindows移植到S3C44B0的源码
💻 C
字号:
/* * BRIEF MODULE DESCRIPTION *	Pb1500 specific pci support. * * Copyright 2001,2002 MontaVista Software Inc. * Author: MontaVista Software, Inc. *         	ppopov@mvista.com or source@mvista.com * *  This program is free software; you can redistribute  it and/or modify it *  under  the terms of  the GNU General  Public License as published by the *  Free Software Foundation;  either version 2 of the  License, or (at your *  option) any later version. * *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT, *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *  You should have received a copy of the  GNU General Public License along *  with this program; if not, write  to the Free Software Foundation, Inc., *  675 Mass Ave, Cambridge, MA 02139, USA. */#include <linux/config.h>#ifdef CONFIG_PCI#include <linux/types.h>#include <linux/pci.h>#include <linux/kernel.h>#include <linux/init.h>#include <asm/au1000.h>#include <asm/pb1500.h>#include <asm/pci_channel.h>#define PCI_ACCESS_READ  0#define PCI_ACCESS_WRITE 1#undef DEBUG#ifdef 	DEBUG#define	DBG(x...)	printk(x)#else#define	DBG(x...)	#endif/* TBD */static struct resource pci_io_resource = {	"pci IO space", 	Au1500_PCI_IO_START,	Au1500_PCI_IO_END,	IORESOURCE_IO};static struct resource pci_mem_resource = {	"pci memory space", 	Au1500_PCI_MEM_START,	Au1500_PCI_MEM_END,	IORESOURCE_MEM};extern struct pci_ops pb1500_pci_ops;struct pci_channel mips_pci_channels[] = {	{&pb1500_pci_ops, &pci_io_resource, &pci_mem_resource, (10<<3),(16<<3)},	{(struct pci_ops *) NULL, (struct resource *) NULL,	 (struct resource *) NULL, (int) NULL, (int) NULL}};static unsigned long cfg_addr;static int config_access(unsigned char access_type, struct pci_dev *dev, 			 unsigned char where, u32 * data){	unsigned char bus = dev->bus->number;	unsigned int dev_fn = dev->devfn;	unsigned int device, function;	unsigned long config, status;	static int first = 1;	/*  	 * 7:3 = slot 	 * 2:0 = function	 */	if (bus != 0) {		*data = 0xffffffff;		return -1;	}	if (first) {		first = 0;		cfg_addr = ioremap(Au1500_EXT_CFG, 0x10000000);		if (!cfg_addr) 			printk (KERN_ERR "PCI unable to ioremap cfg space\n");	}	device = (dev_fn >> 3) & 0x1f;	function = dev_fn & 0x7;#if 1	//if (!cfg_addr || (device < 10) || (device > 16)) {	if (!cfg_addr || (device > 16)) {		*data = 0xffffffff;		return -1;	}#endif	writel(((0x2000 << 16) | (readl(Au1500_PCI_STATCMD) & 0xffff)),			Au1500_PCI_STATCMD);	//writel(readl(Au1500_PCI_CFG) & ~PCI_ERROR, Au1500_PCI_CFG);	au_sync_udelay(1);	/* setup the lower 31 bits of the 36 bit address */	config = cfg_addr | 		((1<<device)<<11) | (function << 8) | (where & ~0x3);#if 0	printk("cfg access: config %x, dev_fn %x, device %x function %x\n",			config, dev_fn, device, function);#endif	if (access_type == PCI_ACCESS_WRITE) {		writel(*data, config);	} else {		*data = readl(config);	}	au_sync_udelay(1);	DBG("config_access: %d bus %d device %d at %x *data %x, conf %x\n", 			access_type, bus, device, where, *data, config);	/* check master abort */	status = readl(Au1500_PCI_STATCMD);	if (status & (1<<29)) { 		*data = 0xffffffff;		return -1;	} else if ((status >> 28) & 0xf) {		DBG("PCI ERR detected: status %x\n", status);		*data = 0xffffffff;		return -1;	}	else {		return PCIBIOS_SUCCESSFUL;	}}static int read_config_byte(struct pci_dev *dev, int where, u8 * val){	u32 data;	int ret;	ret = config_access(PCI_ACCESS_READ, dev, where, &data);        if (where & 1) data >>= 8;        if (where & 2) data >>= 16;        *val = data & 0xff;	return ret; }static int read_config_word(struct pci_dev *dev, int where, u16 * val){	u32 data;	int ret;	ret = config_access(PCI_ACCESS_READ, dev, where, &data);        if (where & 2) data >>= 16;        *val = data & 0xffff;	return ret; }static int read_config_dword(struct pci_dev *dev, int where, u32 * val){	int ret;	ret = config_access(PCI_ACCESS_READ, dev, where, val);	return ret; }static int write_config_byte(struct pci_dev *dev, int where, u8 val){	u32 data = 0;       	if (config_access(PCI_ACCESS_READ, dev, where, &data))		return -1;	data = (data & ~(0xff << ((where & 3) << 3))) |	       (val << ((where & 3) << 3));	if (config_access(PCI_ACCESS_WRITE, dev, where, &data))		return -1;	return PCIBIOS_SUCCESSFUL;}static int write_config_word(struct pci_dev *dev, int where, u16 val){        u32 data = 0;	if (where & 1)		return PCIBIOS_BAD_REGISTER_NUMBER;               if (config_access(PCI_ACCESS_READ, dev, where, &data))	       return -1;	data = (data & ~(0xffff << ((where & 3) << 3))) | 	       (val << ((where & 3) << 3));	if (config_access(PCI_ACCESS_WRITE, dev, where, &data))	       return -1;	return PCIBIOS_SUCCESSFUL;}static int write_config_dword(struct pci_dev *dev, int where, u32 val){	if (where & 3)		return PCIBIOS_BAD_REGISTER_NUMBER;	if (config_access(PCI_ACCESS_WRITE, dev, where, &val))	       return -1;	return PCIBIOS_SUCCESSFUL;}struct pci_ops pb1500_pci_ops = {	read_config_byte,        read_config_word,	read_config_dword,	write_config_byte,	write_config_word,	write_config_dword};#endif /* CONFIG_PCI */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -