pppup.annex

unix and linux net driver

#!/bin/sh -f
# -*- Fundamental -*-
#
# kdebug 1  is SC_DEBUG
#        2  is SC_LOG_INPKT
#        4  is SC_LOG_OUTPKT
#        8  is SC_LOG_RAWIN
#        16 is SC_LOG_FLUSH
# 
# add together to get debugging you want
# Remember: for HW flow control you must you /dev/cufa or /dev/cufb
#
#
#  This is an example that dials a modem, logs into a remote Annex terminal
#  server and starts ppp. 
#
exec /usr/local/bin/pppd bsdcomp 10,10 mtu 296 lcp-echo-interval 15 \
lcp-echo-failure 3 debug crtscts kdebug 17 defaultroute modem -pap -chap \
connect '/usr/local/bin/chat -v ABORT BUSY ABORT "NO CARRIER" ABORT "NO DIAL TONE" ABORT "ERROR" "" ATZ0 "OK" ATDT####### CONNECT "" MSUnet: ppp sername: USER assword: PASS PPP.' \
/dev/cufa 57600 lock