wm9713.h

SMDK2416_BSP

#ifndef	_WM9713_H_
#define	_WM9713_H_

typedef enum
{
	WM9713_RESET						= 0x00,
	WM9713_SPEAKER_VOL				= 0x02,
	WM9713_HEADPHONE_VOL			= 0x04,
	WM9713_OUT34_VOL					= 0x06,
	WM9713_MONO_VOL_ROUTING		= 0x08,
	WM9713_LINEIN_VOL_ROUTING		= 0x0A,
	WM9713_DAC_VOL_ROUTING			= 0x0C,
	WM9713_MIC_VOL					= 0x0E,
	WM9713_MIC_ROUTING				= 0x10,
	WM9713_RECORD_VOL				= 0x12,
	WM9713_RECORD_ROUTING_MUX		= 0x14,
	WM9713_PCBEEP_VOL_ROUTING		= 0x16,
	WM9713_VxDAC_VOL_ROUTING		= 0x18,
	WM9713_AUXDAC_VOL_ROUTING		= 0x1A,
	WM9713_OUTPUT_MUX				= 0x1C,
	WM9713_DAC_3D_INV_MUX			= 0x1E,
	WM9713_DAC_TONE					= 0x20,
	WM9713_MIC_INPUT_SEL				= 0x22,
	WM9713_OUTPUT_VOL_MAP			= 0x24,
	WM9713_POWER_CONTROL			= 0x26,
	WM9713_EXTED_AUDIOID			= 0x28,
	WM9713_EXTED_AUDIOCTRL			= 0x2A,
	WM9713_AUDIO_DAC_RATE			= 0x2C,
	WM9713_AUX_DAC_RATE				= 0x2E,
	WM9713_AUDIO_ADC_RATE			= 0x32,
	WM9713_PCM_CODEC_CTRL			= 0x36,
	WM9713_SPDIF_CONTROL				= 0x3A,
	WM9713_POWERDOWN1				= 0x3C,
	WM9713_POWERDOWN2				= 0x3E,
	WM9713_GENERAL					= 0x40,
	WM9713_FAST_POWERUP_CTRL		= 0x42,
	WM9713_MCLK_PLL_CTRL0			= 0x44,
	WM9713_MCLK_PLL_CTRL1			= 0x46,
	WM9713_GPIO_CONFIG				= 0x4C,
	WM9713_GPIO_POLARITY				= 0x4E,
	WM9713_GPIO_STICKY				= 0x50,
	WM9713_GPIO_WAKEUP				= 0x52,
	WM9713_GPIO_STATUS				= 0x54,
	WM9713_GPIO_SAHRING				= 0x56,
	WM9713_GPIO_PULLUPDN			= 0x58,
	WM9713_ADDITIONAL_FUNC1			= 0x5A,
	WM9713_ADDITIONAL_FUNC2			= 0x5C,
	WM9713_ALC_CONTROL				= 0x60,
	WM9713_ALC_NOISE_CONTROL		= 0x62,
	WM9713_AUXDAC_INPUT_CTRL		= 0x64,
	WM9713_DIGITISER_REG1			= 0x74,
	WM9713_DIGITISER_REG2			= 0x76,
	WM9713_DIGITISER_REG3			= 0x78,
	WM9713_DIGITISER_READBACK		= 0x7A,
	WM9713_VENDOR_ID1				= 0x7C,
	WM9713_VENDOR_ID2				= 0x7E,
}  WM9713_RegAddr;


// control
#define		AC97_PWR_PR0            0x0100      // ADC and Mux powerdown
#define		AC97_PWR_PR1            0x0200      // DAC powerdown
#define		AC97_PWR_PR2            0x0400      // Analog Mixer Powerdown (Vref on)
#define		AC97_PWR_PR3            0x0800      // Output Mixer Powerdown (Vref off)
#define		AC97_PWR_PR4            0x1000      // AC-link Powerdown
#define		AC97_PWR_PR5            0x2000      // Internal Clk Disable
#define		AC97_PWR_PR6            0x4000      // Aux Out Powerdown


// useful power states
#define		AC97_PWR_D0             0x0000      // everything on
#define		AC97_PWR_D1             AC97_PWR_PR0|AC97_PWR_PR1|AC97_PWR_PR4
#define		AC97_PWR_D2             AC97_PWR_PR0|AC97_PWR_PR1|AC97_PWR_PR2|AC97_PWR_PR3|AC97_PWR_PR4
#define		AC97_PWR_D3             AC97_PWR_PR0|AC97_PWR_PR1|AC97_PWR_PR2|AC97_PWR_PR3|AC97_PWR_PR4
#define		AC97_PWR_ANLOFF         AC97_PWR_PR2|AC97_PWR_PR3  //analog section off


#endif	// _WM9713_H_