dlkfet.ldi

test SNMP JAVA

;
;       Novell NetWare Server Driver Description File for DLKFET.LAN
;

VER: 3.15
SYN: 1.00

DR DLKFET
{
        DES:    $DLKFET_1
        HELP:   $DLKFET_2
        PAR:    2.00
        PROD:   'PCI.1106.3043.1186.1400.*',
                'PCI.1106.3065.1186.1401.*'
        FILE:   DLKFET.LAN
        OF  :   MSM.NLM, NBI.NLM, ETHERTSM.NLM
        TIME:   15

;@#     SPROD: 'D-Link D-Link DFE-530TX PCI Fast Ethernet Adapter'
;@#     CLIENT: DLKFET.LAN
;@#     ALIAS: DLKFET.LAN

        PR SLOT OPT
        {
                DES:    $DLKFET_3
                HELP:   $DLKFET_4

                TYP:    DEC
                VAL:    1-65535
                DEF:    UND
                OUT:    'SLOT=%s'
        }

        FR FrameSelect
        {
                CD:     $DLKFET_5
                CH:     $DLKFET_6
                CD:     $DLKFET_7
                CH:     $DLKFET_8
                CD:     $DLKFET_9
                CH:     $DLKFET_10
                CD:     $DLKFET_11
                CH:     $DLKFET_12
                DEF:    1,2,3,4
        }

        LI Attachment OPT
        {
                DES:    $DLKFET_13
                HELP:   $DLKFET_14

                CD:     $DLKFET_17
                CH:     $DLKFET_18
                CD:     $DLKFET_19
                CH:     $DLKFET_20
                CD:     $DLKFET_21
                CH:     $DLKFET_22
                CD:     $DLKFET_23
                CH:     $DLKFET_24
                CD:     $DLKFET_25
                CH:     $DLKFET_26
                DEF:    1
                OUT:    '%s'
        }

        PR NODE OPT
        {
                DES:    $DLKFET_27
                TYP:    HEX
                VAL:    1-FFFFFFFFFFFE
                DEF:    UND
                OUT:    'NODE=%s'
        }

}


DLANG:  4
;English
        $DLKFET_1 = "D-Link DFE-530TX PCI Fast Ethernet Adapter driver"
        $DLKFET_2 = "This driver supports PCI bus devices"
        $DLKFET_3 = "Slot"
        $DLKFET_4 = "Select the slot number that corresponds to the physical
                        expansion slot where the board or other device is installed."
        $DLKFET_5 = "802.3"
        $DLKFET_6 = "ethernet_802.3"
        $DLKFET_7 = "802.2"
        $DLKFET_8 = "ethernet_802.2"
        $DLKFET_9 = "SNAP"
        $DLKFET_10 = "ethernet_snap"
        $DLKFET_11 = "ethernet II"
        $DLKFET_12 = "ethernet_II"
        $DLKFET_13 = "Media and Line Speed"
        $DLKFET_14 = "Choose the connection/media type you would
                       like to use, or NONE for preprogramed card's
                       default."
        $DLKFET_15 = "Auto Sense"
        $DLKFET_16 = ""
        $DLKFET_17 = "Auto-Sense media type"
        $DLKFET_18 = "Autosense"
        $DLKFET_19 = "Twisted Pair 10MBPS"
        $DLKFET_20 = "10BASET"
        $DLKFET_21 = "Twisted pair - Full Duplex 10MBPS"
        $DLKFET_22 = "10BASETFD"
        $DLKFET_23 = "Twisted pair - Full Duplex 100MBPS"
        $DLKFET_24 = "100BASETXFD"
        $DLKFET_25 = "Fast Ethernet 100MBPS"
        $DLKFET_26 = "100BASETX"
        $DLKFET_27 = "Node Address"

LANG:  6
;French
        $DLKFET_1 = "D-Link DFE-530TX PCI Fast Ethernet Adapter driver"
        $DLKFET_2 = "This driver supports PCI bus devices"
        $DLKFET_3 = "Slot"
        $DLKFET_4 = "Select the slot number that corresponds to the physical
                        expansion slot where the board or other device is installed."
        $DLKFET_5 = "802.3"
        $DLKFET_6 = "ethernet_802.3"
        $DLKFET_7 = "802.2"
        $DLKFET_8 = "ethernet_802.2"
        $DLKFET_9 = "SNAP"
        $DLKFET_10 = "ethernet_snap"
        $DLKFET_11 = "ethernet II"
        $DLKFET_12 = "ethernet_II"
        $DLKFET_13 = "Media and Line Speed"
        $DLKFET_14 = "Choose the connection/media type you would
                       like to use, or NONE for preprogramed card's
                       default."
        $DLKFET_15 = "Auto Sense"
        $DLKFET_16 = ""
        $DLKFET_17 = "Auto-Sense media type"
        $DLKFET_18 = "Autosense"
        $DLKFET_19 = "Twisted Pair 10MBPS"
        $DLKFET_20 = "10BASET"
        $DLKFET_21 = "Twisted pair - Full Duplex 10MBPS"
        $DLKFET_22 = "10BASETFD"
        $DLKFET_23 = "Twisted pair - Full Duplex 100MBPS"
        $DLKFET_24 = "100BASETXFD"
        $DLKFET_25 = "Fast Ethernet 100MBPS"
        $DLKFET_26 = "100BASETX"
        $DLKFET_27 = "Node Address"

LANG:  7
;German
        $DLKFET_1 = "D-Link DFE-530TX PCI Fast Ethernet Adapter driver"
        $DLKFET_2 = "This driver supports PCI bus devices"
        $DLKFET_3 = "Slot"
        $DLKFET_4 = "Select the slot number that corresponds to the physical
                        expansion slot where the board or other device is installed."
        $DLKFET_5 = "802.3"
        $DLKFET_6 = "ethernet_802.3"
        $DLKFET_7 = "802.2"
        $DLKFET_8 = "ethernet_802.2"
        $DLKFET_9 = "SNAP"
        $DLKFET_10 = "ethernet_snap"
        $DLKFET_11 = "ethernet II"
        $DLKFET_12 = "ethernet_II"
        $DLKFET_13 = "Media and Line Speed"
        $DLKFET_14 = "Choose the connection/media type you would
                       like to use, or NONE for preprogramed card's
                       default."
        $DLKFET_15 = "Auto Sense"
        $DLKFET_16 = ""
        $DLKFET_17 = "Auto-Sense media type"
        $DLKFET_18 = "Autosense"
        $DLKFET_19 = "Twisted Pair 10MBPS"
        $DLKFET_20 = "10BASET"
        $DLKFET_21 = "Twisted pair - Full Duplex 10MBPS"
        $DLKFET_22 = "10BASETFD"
        $DLKFET_23 = "Twisted pair - Full Duplex 100MBPS"
        $DLKFET_24 = "100BASETXFD"
        $DLKFET_25 = "Fast Ethernet 100MBPS"
        $DLKFET_26 = "100BASETX"
        $DLKFET_27 = "Node Address"

LANG:  8
;Italian
        $DLKFET_1 = "D-Link DFE-530TX PCI Fast Ethernet Adapter driver"
        $DLKFET_2 = "This driver supports PCI bus devices"
        $DLKFET_3 = "Slot"
        $DLKFET_4 = "Select the slot number that corresponds to the physical
                        expansion slot where the board or other device is installed."
        $DLKFET_5 = "802.3"
        $DLKFET_6 = "ethernet_802.3"
        $DLKFET_7 = "802.2"
        $DLKFET_8 = "ethernet_802.2"
        $DLKFET_9 = "SNAP"
        $DLKFET_10 = "ethernet_snap"
        $DLKFET_11 = "ethernet II"
        $DLKFET_12 = "ethernet_II"
        $DLKFET_13 = "Media and Line Speed"
        $DLKFET_14 = "Choose the connection/media type you would
                       like to use, or NONE for preprogramed card's
                       default."
        $DLKFET_15 = "Auto Sense"
        $DLKFET_16 = ""
        $DLKFET_17 = "Auto-Sense media type"
        $DLKFET_18 = "Autosense"
        $DLKFET_19 = "Twisted Pair 10MBPS"
        $DLKFET_20 = "10BASET"
        $DLKFET_21 = "Twisted pair - Full Duplex 10MBPS"
        $DLKFET_22 = "10BASETFD"
        $DLKFET_23 = "Twisted pair - Full Duplex 100MBPS"
        $DLKFET_24 = "100BASETXFD"
        $DLKFET_25 = "Fast Ethernet 100MBPS"
        $DLKFET_26 = "100BASETX"
        $DLKFET_27 = "Node Address"

LANG:  14
;Spanish
        $DLKFET_1 = "D-Link DFE-530TX PCI Fast Ethernet Adapter driver"
        $DLKFET_2 = "This driver supports PCI bus devices"
        $DLKFET_3 = "Slot"
        $DLKFET_4 = "Select the slot number that corresponds to the physical
                        expansion slot where the board or other device is installed."
        $DLKFET_5 = "802.3"
        $DLKFET_6 = "ethernet_802.3"
        $DLKFET_7 = "802.2"
        $DLKFET_8 = "ethernet_802.2"
        $DLKFET_9 = "SNAP"
        $DLKFET_10 = "ethernet_snap"
        $DLKFET_11 = "ethernet II"
        $DLKFET_12 = "ethernet_II"
        $DLKFET_13 = "Media and Line Speed"
        $DLKFET_14 = "Choose the connection/media type you would
                       like to use, or NONE for preprogramed card's
                       default."
        $DLKFET_15 = "Auto Sense"
        $DLKFET_16 = ""
        $DLKFET_17 = "Auto-Sense media type"
        $DLKFET_18 = "Autosense"
        $DLKFET_19 = "Twisted Pair 10MBPS"
        $DLKFET_20 = "10BASET"
        $DLKFET_21 = "Twisted pair - Full Duplex 10MBPS"
        $DLKFET_22 = "10BASETFD"
        $DLKFET_23 = "Twisted pair - Full Duplex 100MBPS"
        $DLKFET_24 = "100BASETXFD"
        $DLKFET_25 = "Fast Ethernet 100MBPS"
        $DLKFET_26 = "100BASETX"
        $DLKFET_27 = "Node Address"