example_28xspi_ffdlb.c

TI公司的2812dsp所有程序

//
//      TMDX ALPHA RELEASE
//      Intended for product evaluation purposes
//
//###########################################################################
//
// FILE:	Example_28xSpi_FFDLB.c
//
// TITLE:	DSP28 Device Spi Digital Loop Back porgram. 
//			All these tests will self validate the code and update the 
//          Test status in Test_status array. 
//			And PASS_Flag =0xDOBE for pass, 0xDEAD for fail
//
//  Test 1  SPI  16-bit character, Internal loop back
//          In MASTER MODE  Rising edge, baud rate =0x07f 
//		
//		
//		
//
//###########################################################################
//
//  Ver | dd mmm yyyy | Who  | Description of changes
// =====|=============|======|===============================================
//  0.56| 06 May 2002 | S.S. | EzDSP Alpha Release
//  0.57| 27 May 2002 | L.H. | No change
//  0.58| 03 July2002 | S.S. | SPI example 
//###########################################################################


#include "DSP28_Device.h"
#include "DSP28_Globalprototypes.h"

// Prototype statements for functions found within this file.
// interrupt void ISRTimer2(void);
void delay_loop(void);
void spi_dlb16(void);
void spi_xmit(int a);
void spi_fifo_init(void);	
void error(int);
void program_stop();
unsigned int var1 = 0;
unsigned int var2 = 0;
unsigned int var3 = 0; 
unsigned int var4 = 0;
unsigned int var5 = 0; 
unsigned int test_count = 0;
unsigned int Test_flag1 = 0;
unsigned int Test_flag2 = 0;
unsigned int Test_flag3 = 0;
unsigned int Test_flag4 = 0;
unsigned int Test_var  = 0;
unsigned int Test_status[32];
unsigned int PASS_flag = 0;

void main(void)
{

// Step 1. Initialize System Control registers, PLL, WatchDog, Clocks to default state:
        // This function is found in the DSP28_SysCtrl.c file.
	InitSysCtrl();



// Step 2. Select GPIO for the device or for the specific application:
        // This function is found in the DSP28_Gpio.c file.
//	InitGpio(); skip this as this is example selects the I/O for McBSP in this file itself
	 EALLOW;
	 
     GpioMuxRegs.GPFMUX.all=0x000F;	// Select GPIOs to be SPI pins	 
 									// Port F MUX - x000 0000 0000 1111
 									    
     EDIS;

// Step 3. Initialize PIE vector table:
	// The PIE vector table is initialized with pointers to shell Interrupt 
        // Service Routines (ISR).  The shell routines are found in DSP28_DefaultIsr.c.
	// Insert user specific ISR code in the appropriate shell ISR routine in 
        // the DSP28_DefaultIsr.c file.

	// Disable and clear all CPU interrupts:
	DINT;
	IER = 0x0000;
	IFR = 0x0000;

	// Initialize Pie Control Registers To Default State:
        // This function is found in the DSP28_PieCtrl.c file.
	InitPieCtrl();

	// Initialize the PIE Vector Table To a Known State:
        // This function is found in DSP28_PieVect.c.
	// This function populates the PIE vector table with pointers
    // to the shell ISR functions found in DSP28_DefaultIsr.c.
	InitPieVectTable();	
	
// Step 4. Initialize all the Device Peripherals to a known state:
	// This function is found in DSP28_InitPeripherals.c
    // InitPeripherals(); skip this for GPIO tests
	
// Step 5. User specific functions, Reassign vectors (optional), Enable Interrupts:

	
    spi_fifo_init();	// Initialize the Spi FIFO
	
	spi_dlb16();		// Digital loop back test


// Update Test status	
	if(PASS_flag !=0) 
	   PASS_flag=0xDEAD;								// Test code exit here..
	else
	   PASS_flag=0xD0BE;								// Test code exit he
	
//	EALLOW;	// This is needed to write to EALLOW protected registers
//	PieVectTable.TINT2 = &ISRTimer2;
//	EDIS;   // This is needed to disable write to EALLOW protected registers
    

    // Enable INT14 which is connected to CPU-Timer 2:
//	IER |= M_INT14;

    // Enable global Interrupts and higher priority real-time debug events:
	
//	EINT;   // Enable Global interrupt INTM
//	ERTM;	// Enable Global realtime interrupt DBGM

// Step 6. IDLE loop. Just sit and loop forever (optional):	
    asm("     ESTOP0");			// Break point
	for(;;);

} 	


// Step 7. Insert all local Interrupt Service Routines (ISRs) and functions here:	
	// If local ISRs are used, reassign vector addresses in vector table as
    // shown in Step 5
/*
// Interrupt function template
interrupt void ISRTimer2(void)
{
	
}
*/

// Some Useful local functions
void delay_loop()
{
    long      i;
    for (i = 0; i < 1000000; i++) {}
}


void error(int ErrorFlag)
{
    PASS_flag =0xDEAD;
    Test_status[ Test_var]= 0xDEAD;	    
//    asm("     ESTOP0");						// Test failed!! Stop!
//    for (;;);

}

//  Test 1,SPI  16-bit character, Internal loop back
//  In MASTER MODE  Rising edge, baud rate =0x07f 
 
void spi_dlb16()
	{    
	   
	SpiaRegs.SPICCR.all =0x000F;	             // Reset on, rising edge, 16-bit char bits  
						
	SpiaRegs.SPICTL.all =0x0006;    		     // Enable master mode, normal phase,
                                                 // enable talk, and SPI int disabled.
	SpiaRegs.SPIBRR =0x007F;									

// Bit changes to registers        

// Release Reset for SPI		
    SpiaRegs.SPICCR.all =0x009F;		         // Relinquish SPI from Reset   
                                                 // Bit 4 loop back mode enabled
// Bit changes for the test  
 
    var3 =0x4141;							
    spi_xmit(var3); 
    while(SpiaRegs.SPIFFRX.bit.RXFFST !=1) { } 			
    Test_flag4 = SpiaRegs.SPIRXBUF;				
    if(Test_flag4 != 0x4141) error(1);
    Test_status[ Test_var]= 0x8000;		     // update Test_status test number
    Test_var++; 
	
    }



void spi_xmit(int a)
{

    SpiaRegs.SPITXBUF =a;

    
}    

void spi_fifo_init()										
{
// Initialize SPI FIFO registers
    SpiaRegs.SPIFFTX.all=0xE040;
    SpiaRegs.SPIFFRX.all=0x204f;
    SpiaRegs.SPIFFCT.all=0x0;
    
}  

                							
 
    


//===========================================================================
// No more.
//===========================================================================