configure

Screentest is a CRT/LCD screen testing utility.

  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_gtk_version");
     exit(1);
   }

  if ((gtk_major_version != $gtk_config_major_version) ||
      (gtk_minor_version != $gtk_config_minor_version) ||
      (gtk_micro_version != $gtk_config_micro_version))
    {
      printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", 
             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
             gtk_major_version, gtk_minor_version, gtk_micro_version);
      printf ("*** was found! If gtk-config was correct, then it is best\n");
      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
      printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
      printf("*** before re-running configure\n");
    } 
#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
  else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
	   (gtk_minor_version != GTK_MINOR_VERSION) ||
           (gtk_micro_version != GTK_MICRO_VERSION))
    {
      printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
	     GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
      printf("*** library (version %d.%d.%d)\n",
	     gtk_major_version, gtk_minor_version, gtk_micro_version);
    }
#endif /* defined (GTK_MAJOR_VERSION) ... */
  else
    {
      if ((gtk_major_version > major) ||
        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
               gtk_major_version, gtk_minor_version, gtk_micro_version);
        printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
	       major, minor, micro);
        printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
        printf("*** correct copy of gtk-config. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}

EOF
if { (eval echo configure:1703: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  no_gtk=yes
fi
rm -fr conftest*
fi

       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_gtk" = x ; then
     echo "$ac_t""yes" 1>&6
     :     
  else
     echo "$ac_t""no" 1>&6
     if test "$GTK_CONFIG" = "no" ; then
       echo "*** The gtk-config script installed by GTK could not be found"
       echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the GTK_CONFIG environment variable to the"
       echo "*** full path to gtk-config."
     else
       if test -f conf.gtktest ; then
        :
       else
          echo "*** Could not run GTK test program, checking why..."
          CFLAGS="$CFLAGS $GTK_CFLAGS"
          LIBS="$LIBS $GTK_LIBS"
          cat > conftest.$ac_ext <<EOF
#line 1737 "configure"
#include "confdefs.h"

#include <gtk/gtk.h>
#include <stdio.h>

int main() {
 return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); 
; return 0; }
EOF
if { (eval echo configure:1747: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
   echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GTK or finding the wrong"
          echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
          echo "***"
          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
          echo "*** came with the system with the command"
          echo "***"
          echo "***    rpm --erase --nodeps gtk gtk-devel" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
   echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means GTK was incorrectly installed"
          echo "*** or that you have moved GTK since it was installed. In the latter case, you"
          echo "*** may want to edit the gtk-config script: $GTK_CONFIG" 
fi
rm -f conftest*
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GTK_CFLAGS=""
     GTK_LIBS=""
     { echo "configure: error: Cannot find GTK: Is gtk-config in path?" 1>&2; exit 1; }
  fi
  
  
  rm -f conf.gtktest


if test "x$GCC" = "xyes"; then
  case " $CFLAGS " in
  *[\ \	]-Wall[\ \	]*) ;;
  *) CFLAGS="$CFLAGS -Wall" ;;
  esac
fi


trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

DEFS=-DHAVE_CONFIG_H

# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}

echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.

ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
  case "\$ac_option" in
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
    echo "$CONFIG_STATUS generated by autoconf version 2.13"
    exit 0 ;;
  -help | --help | --hel | --he | --h)
    echo "\$ac_cs_usage"; exit 0 ;;
  *) echo "\$ac_cs_usage"; exit 1 ;;
  esac
done

ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"

trap 'rm -fr `echo "Makefile config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF

# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@PACKAGE@%$PACKAGE%g
s%@VERSION@%$VERSION%g
s%@ACLOCAL@%$ACLOCAL%g
s%@AUTOCONF@%$AUTOCONF%g
s%@AUTOMAKE@%$AUTOMAKE%g
s%@AUTOHEADER@%$AUTOHEADER%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
s%@CC@%$CC%g
s%@CPP@%$CPP%g
s%@GTK_CONFIG@%$GTK_CONFIG%g
s%@GTK_CFLAGS@%$GTK_CFLAGS%g
s%@GTK_LIBS@%$GTK_LIBS%g

CEOF
EOF

cat >> $CONFIG_STATUS <<\EOF

# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
  if test $ac_beg -gt 1; then
    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
  else
    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
  fi
  if test ! -s conftest.s$ac_file; then
    ac_more_lines=false
    rm -f conftest.s$ac_file
  else
    if test -z "$ac_sed_cmds"; then
      ac_sed_cmds="sed -f conftest.s$ac_file"
    else
      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
    fi
    ac_file=`expr $ac_file + 1`
    ac_beg=$ac_end
    ac_end=`expr $ac_end + $ac_max_sed_cmds`
  fi
done
if test -z "$ac_sed_cmds"; then
  ac_sed_cmds=cat
fi
EOF

cat >> $CONFIG_STATUS <<EOF

CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.

  # Remove last slash and all that follows it.  Not all systems have dirname.
  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
    # The file is in a subdirectory.
    test ! -d "$ac_dir" && mkdir "$ac_dir"
    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
    # A "../" for each directory in $ac_dir_suffix.
    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
  else
    ac_dir_suffix= ac_dots=
  fi

  case "$ac_given_srcdir" in
  .)  srcdir=.
      if test -z "$ac_dots"; then top_srcdir=.
      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
  *) # Relative path.
    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
    top_srcdir="$ac_dots$ac_given_srcdir" ;;
  esac

  case "$ac_given_INSTALL" in
  [/$]*) INSTALL="$ac_given_INSTALL" ;;
  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
  esac

  echo creating "$ac_file"
  rm -f "$ac_file"
  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
  case "$ac_file" in
  *Makefile*) ac_comsub="1i\\
# $configure_input" ;;
  *) ac_comsub= ;;
  esac

  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
ac_dB='\([