📄 rfc2561.txt
字号:
connecting into an SNA network.
White & Moore Standards Track [Page 18]
RFC 2561 TN3270E Using SMIv2 MIB April 1999
A gateway TN3270E server resides on an SNA node other
than an SSCP, either an SNA type 2.0 node or an APPN node
acting in the role of a Dependent LU Requester (DLUR).
Host and gateway TN3270E server implementations typically
differ greatly as to their internal implementation and
system definition (SYSDEF) requirements."
::= { tn3270eSrvrConfEntry 10 }
tn3270eSrvrConfContact OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object provides a scratch pad for a TN3270E
server administrator for storing information for
later retrieval."
DEFVAL { ''H } -- the empty string
::= { tn3270eSrvrConfEntry 11 }
tn3270eSrvrConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created and deleted
in the tn3270eSrvrConfTable. Entries may also be
created and deleted as a result of implementation-
dependent operations.
With the exception of tn3270eSrvrConfSrvrType, which
an implementation can easily fill in for itself, all
the columnar objects in this table have DEFVALs
associated with them. Consequently, a Management
Station can create a conceptual row via a SET
operation that specifies a value only for this object.
When a tn3270eSrvrConfEntry is deleted (by setting
this object to destroy(6)), this has the side-effect
of removing all the associated entries (i.e., those
having the same tn3270eSrvrConfIndex) from the
tn3270eSrvrPortTable, the tn3270eSrvrStatsTable, the
tn3270eClientGroupTable, the tn3270eResPoolTable,
the tn3270eSnaMapTable, the tn3270eClientResMapTable,
and the tn3270eResMapTable. All entries in the
tn3270eTcpConnTable that belong to a TN3270E server
that has been deleted MUST also be removed.
White & Moore Standards Track [Page 19]
RFC 2561 TN3270E Using SMIv2 MIB April 1999
In other words, a tn3270eSrvrConfEntry must exist for
a TN3270E server in order for it to have entries in
any of the other tables defined by this MIB."
REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the
Simple Network Management Protocol (SNMPv2).'"
::= { tn3270eSrvrConfEntry 12 }
tn3270eSrvrConfLastActTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reports the DateAndTime when a TN3270E
server was most recently activated.
The special value of all '00'Hs indicates that the
server has never been active, i.e., that the value of
tn3270eSrvrOperStatus has never been anything other
than down(2)."
DEFVAL { '0000000000000000'H }
::= { tn3270eSrvrConfEntry 13 }
tn3270eSrvrConfTmTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..600) -- 1 second to 10 minutes
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The TIMING-MARK time-out, specified in seconds."
DEFVAL { 5 } -- 5 seconds
::= { tn3270eSrvrConfEntry 14 }
tn3270eSrvrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270eSrvrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines the TCP ports associated with
TN3270E servers. No entry in this table shall exist
without a corresponding (same tn3270eSrvrConfIndex)
entry in the tn3270eSrvrConfTable existing.
An implementation SHOULD NOT retain SNMP-created
entries in this table across re-IPLs (Initial Program
Loads) of the corresponding TN3270E server."
::= { tn3270eObjects 2 }
White & Moore Standards Track [Page 20]
RFC 2561 TN3270E Using SMIv2 MIB April 1999
tn3270eSrvrPortEntry OBJECT-TYPE
SYNTAX Tn3270eSrvrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Definition of a single TCP port assignment to a
TN3270E server. Assignment of a port on a local
address basis is enabled though use of
tn3270eSrvrPortAddrType and tn3270eSrvrPortAddress.
A TCP port assignment that is not restricted to
a local address SHALL specify a tn3270eSrvrPortAddrType
of unknown(0), and SHALL use a zero-length octet string
for the tn3270eSrvrPortAddress."
INDEX {
tn3270eSrvrConfIndex,
tn3270eSrvrPort,
tn3270eSrvrPortAddrType,
tn3270eSrvrPortAddress
}
::= { tn3270eSrvrPortTable 1 }
Tn3270eSrvrPortEntry ::= SEQUENCE {
tn3270eSrvrPort Unsigned32,
tn3270eSrvrPortAddrType IANATn3270eAddrType,
tn3270eSrvrPortAddress IANATn3270eAddress,
tn3270eSrvrPortRowStatus RowStatus
}
tn3270eSrvrPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates a port assigned to a server."
::= { tn3270eSrvrPortEntry 1 }
tn3270eSrvrPortAddrType OBJECT-TYPE
SYNTAX IANATn3270eAddrType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the type of an address local to the host on
which the TN3270E server resides that is represented
in tn3270eSrvrPortAddress. A value of unknown(0)
SHALL be used for this object when the port is not
to be restricted to a local address."
::= { tn3270eSrvrPortEntry 2 }
White & Moore Standards Track [Page 21]
RFC 2561 TN3270E Using SMIv2 MIB April 1999
tn3270eSrvrPortAddress OBJECT-TYPE
SYNTAX IANATn3270eAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A local address on the host that a TN3270E server
resides on that is associated with a TCP port that
is to be used or is in use by a TN3270E server.
tn3270eClientGroupAddrType indicates the
address type (IPv4 or IPv6, for example).
A zero-length octet string SHALL be used as the
value of this object when a local address isn't
being specified."
::= { tn3270eSrvrPortEntry 3 }
tn3270eSrvrPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created and deleted
in the tn3270eSrvrPortTable. Entries may also be
created and deleted as a result of implementation-
dependent operations.
Since this is the only accessible object in this table,
a Management Station can create a conceptual row via a SET
operation that specifies a value only for this object.
An entry in this table is deleted by setting this object
to destroy(6). Deletion of a tn3270eSrvrPortEntry has
no effect on any other table entry defined by this MIB."
REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the
Simple Network Management Protocol (SNMPv2).'"
::= { tn3270eSrvrPortEntry 4 }
tn3270eSrvrStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270eSrvrStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines a set of statistics concerning
TN3270E server performance.
No entry in this table shall exist without
a corresponding (same tn3270eSrvrConfIndex) entry in
White & Moore Standards Track [Page 22]
RFC 2561 TN3270E Using SMIv2 MIB April 1999
the tn3270eSrvrConfTable existing."
::= { tn3270eObjects 3 }
tn3270eSrvrStatsEntry OBJECT-TYPE
SYNTAX Tn3270eSrvrStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of statistical and maximum usage objects
for a single TN3270 server. An entry can represent the total
activity of the server, or it can represent the activity
occurring at the server on either a port or a
port-and-local-address basis.
Collection of the statistics represented by the objects
in this table is not mandatory. An implementation
of this table MUST use only one of the three levels of
refinement that this table supports for the entries
associated with each TN3270E server.
The indexing for a row that represents total server
statistics is as follows:
tn3270eSrvrConfIndex value identifying the server
tn3270eSrvrPort 0
tn3270eSrvrPortAddrType unknown(0)
tn3270eSrvrPortAddress zero-length octet string.
On a port basis:
tn3270eSrvrConfIndex value identifying the server
tn3270eSrvrPort > 0
tn3270eSrvrPortAddrType unknown(0)
tn3270eSrvrPortAddress zero-length octet string.
On a port-and-local-address basis:
tn3270eSrvrConfIndex value identifying the server
tn3270eSrvrPort > 0
tn3270eSrvrPortAddrType valid value other than unknown(0)
tn3270eSrvrPortAddress non-zero-length octet string.
"
INDEX {
tn3270eSrvrConfIndex,
tn3270eSrvrPort,
tn3270eSrvrPortAddrType,
tn3270eSrvrPortAddress
White & Moore Standards Track [Page 23]
RFC 2561 TN3270E Using SMIv2 MIB April 1999
}
::= { tn3270eSrvrStatsTable 1 }
Tn3270eSrvrStatsEntry ::= SEQUENCE {
tn3270eSrvrStatsUpTime TimeStamp,
tn3270eSrvrStatsMaxTerms Unsigned32,
tn3270eSrvrStatsInUseTerms Gauge32,
tn3270eSrvrStatsSpareTerms Gauge32,
tn3270eSrvrStatsMaxPtrs Unsigned32,
tn3270eSrvrStatsInUsePtrs Gauge32,
tn3270eSrvrStatsSparePtrs Gauge32,
tn3270eSrvrStatsInConnects Counter32,
tn3270eSrvrStatsConnResrceRejs Counter32,
tn3270eSrvrStatsDisconnects Counter32,
tn3270eSrvrStatsHCInOctets Counter64,
tn3270eSrvrStatsInOctets Counter32,
tn3270eSrvrStatsHCOutOctets Counter64,
tn3270eSrvrStatsOutOctets Counter32,
tn3270eSrvrStatsConnErrorRejs Counter32
}
tn3270eSrvrStatsUpTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the sysUpTime object the last time
the TN3270E server was re-initialized.
Server re-initialization is the only discontinuity
event for the counters in this table. Even if table
entries are on a port or port-and-local-address
basis, port deactivation and reactivation do not
result in counter discontinuities."
::= { tn3270eSrvrStatsEntry 2 }
tn3270eSrvrStatsMaxTerms OBJECT-TYPE
SYNTAX Unsigned32
UNITS "LUs"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum number of terminal LUs available
for use at a TN3270E server for the granularity of this
conceptual row (server-wide, port, or
port-and-local-address)."
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -