📄 rfc1285.txt
字号:
framework will recognize that thresholds are not
in keeping with the SNMP philosophy. However,
this variable is supported by underlying SMT
implementations already and maintaining this
threshold should not pose an undue additional
burden on SNMP agent implementors."
REFERENCE
"ANSI { fddiMAC 95 }"
::= { snmpFddiMACEntry 23 }
snmpFddiMACFrameErrorRatio OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute is the actual ratio, ((delta
snmpFddiMACLostCt + delta snmpFddiMACErrorCt) /
(delta snmpFddiMACFrameCt + delta
snmpFddiMACLostCt)) x 2**16."
REFERENCE
"ANSI { fddiMAC 96 }"
::= { snmpFddiMACEntry 24 }
Case [Page 24]
RFC 1285 FDDI MIB January 1992
snmpFddiMACRMTState OBJECT-TYPE
SYNTAX INTEGER {
rm0(1), -- Isolated
rm1(2), -- Non_Op
rm2(3), -- Ring_Op
rm3(4), -- Detect
rm4(5), -- Non_Op_Dup
rm5(6), -- Ring_Op_Dup
rm6(7), -- Directed
rm7(8) -- Trace
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current state of the Ring
Management state machine (refer to ANSI Section
10)."
REFERENCE
"ANSI { fddiMAC 111 }"
::= { snmpFddiMACEntry 25 }
snmpFddiMACDaFlag OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RMT flag Duplicate Address Flag, DA_Flag
(refer to ANSI 10.3.1.2)."
REFERENCE
"ANSI { fddiMAC 112 }"
::= { snmpFddiMACEntry 26 }
snmpFddiMACUnaDaFlag OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A flag set when the upstream neighbor reports a
duplicate address condition. Reset when the
condition clears."
REFERENCE
"ANSI { fddiMAC 113 }"
::= { snmpFddiMACEntry 27 }
snmpFddiMACFrameCondition OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-only
STATUS mandatory
Case [Page 25]
RFC 1285 FDDI MIB January 1992
DESCRIPTION
"Indicates the MAC Condition is active when set.
Cleared when the condition clears and on power
up."
REFERENCE
"ANSI { fddiMAC 114 }"
::= { snmpFddiMACEntry 28 }
snmpFddiMACChipSet OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object identifies the hardware chip(s) which
is (are) principally responsible for the
implementation of the MAC function. A few OBJECT
IDENTIFIERS are identified elsewhere in this memo.
For those The assignment of additional OBJECT
IDENTIFIERs to various types of hardware chip sets
is managed by the IANA. For example, vendors
whose chip sets are not defined in this memo may
request a number from the Internet Assigned
Numbers Authority (IANA) which indicates the
assignment of a enterprise specific subtree which,
among other things, may be used to allocate OBJECT
IDENTIFIER assignments for that enterprise's chip
sets. Similarly, in the absence of an
appropriately assigned OBJECT IDENTIFIER in this
memo or in an enterprise specific subtree of a
chip vendor, a board or system vendor can request
a number for a subtree from the IANA and make an
appropriate assignment. It is desired that,
whenever possible, the same OBJECT IDENTIFIER be
used for all chips of a given type. Consequently,
the assignment made in this memo for a chip, if
any, should be used in preference to any other
assignment and the assignment made by the chip
manufacturer, if any, should be used in preference
to assignments made by users of those chips. If
the hardware chip set is unknown, the object
identifier
unknownChipSet OBJECT IDENTIFIER ::= { 0 0 }
is returned. Note that unknownChipSet is a
syntactically valid object identifier, and any
conformant implementation of ASN.1 and the BER
must be able to generate and recognize this
Case [Page 26]
RFC 1285 FDDI MIB January 1992
value."
::= { snmpFddiMACEntry 29 }
snmpFddiMACAction OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
enableLLCService(2),
disableLLCService(3),
connectMAC(4),
disconnectMAC(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object, when read, always returns a value of
other(1). The behavior of setting this variable
to each of the acceptable values is as follows:
Other: Results in a badValue
error.
enableLLCService: enables MAC service to
higher layers.
disableLLCService: disables MAC service to
higher layers.
connectMAC: connect this MAC in
station.
disconnectMAC: disconnect this MAC in
station.
Attempts to set this object to all other values
results in a badValue error."
REFERENCE
"ANSI { fddiMAC 130 }"
::= { snmpFddiMACEntry 30 }
-- the PATH group
-- the PATH group is empty for now and shall remain so until
-- the ANSI community sorts out their PATH group
-- the PORT group
-- Implementation of the PORT group is mandatory for all
Case [Page 27]
RFC 1285 FDDI MIB January 1992
-- systems which implement manageable FDDI subsystems.
snmpFddiPORTNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of PORT implementations (across
all SMTs) on this network management application
entity. The value for this variable must remain
constant at least from one re-initialization of
the entity's network management system to the next
re-initialization."
::= { snmpFddiPORT 1 }
-- the PORT table
snmpFddiPORTTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpFddiPORTEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of PORT entries. The number of entries is
given by the value of snmpFddiPORTNumber."
::= { snmpFddiPORT 2 }
snmpFddiPORTEntry OBJECT-TYPE
SYNTAX SnmpFddiPORTEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A PORT entry containing information common to a
given PORT."
INDEX { snmpFddiPORTSMTIndex, snmpFddiPORTIndex }
::= { snmpFddiPORTTable 1 }
SnmpFddiPORTEntry ::=
SEQUENCE {
snmpFddiPORTSMTIndex
INTEGER,
snmpFddiPORTIndex
INTEGER,
snmpFddiPORTPCType
INTEGER,
snmpFddiPORTPCNeighbor
INTEGER,
snmpFddiPORTConnectionPolicies
Case [Page 28]
RFC 1285 FDDI MIB January 1992
INTEGER,
snmpFddiPORTRemoteMACIndicated
INTEGER,
snmpFddiPORTCEState
INTEGER,
snmpFddiPORTPathsRequested
INTEGER,
snmpFddiPORTMACPlacement
FddiResourceId,
snmpFddiPORTAvailablePaths
INTEGER,
snmpFddiPORTMACLoopTime
FddiTime,
snmpFddiPORTTBMax
FddiTime,
snmpFddiPORTBSFlag
INTEGER,
snmpFddiPORTLCTFailCts
Counter,
snmpFddiPORTLerEstimate
INTEGER,
snmpFddiPORTLemRejectCts
Counter,
snmpFddiPORTLemCts
Counter,
snmpFddiPORTLerCutoff
INTEGER,
snmpFddiPORTLerAlarm
INTEGER,
snmpFddiPORTConnectState
INTEGER,
snmpFddiPORTPCMState
INTEGER,
snmpFddiPORTPCWithhold
INTEGER,
snmpFddiPORTLerCondition
INTEGER,
snmpFddiPORTChipSet
OBJECT IDENTIFIER,
snmpFddiPORTAction
INTEGER
}
snmpFddiPORTSMTIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
Case [Page 29]
RFC 1285 FDDI MIB January 1992
"The value of the SMT index associated with this
PORT."
::= { snmpFddiPORTEntry 1 }
snmpFddiPORTIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each PORT within a given SMT.
Its value ranges between 1 and the sum of the
values of snmpFddiSMTNonMasterCt
{ snmpFddiSMTEntry 6 } and snmpFddiSMTMasterCt
{ snmpFddiSMTEntry 7 } on the given SMT. The
value for each PORT must remain constant at least
from one re-initialization of the entity's network
management system to th⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -