📄 rfc1285.txt
字号:
DESCRIPTION
"Indicates the current state of the ECM state
machine (refer to ANSI SMT 9.5.2)."
REFERENCE
"ANSI { fddiSMT 41 }"
::= { snmpFddiSMTEntry 15 }
snmpFddiSMTCFState OBJECT-TYPE
SYNTAX INTEGER {
cf0(1), -- Isolated
Case [Page 12]
RFC 1285 FDDI MIB January 1992
cf1(2), -- Wrap_S
cf2(3), -- Wrap_A
cf3(4), -- Wrap_B
cf4(5), -- Wrap_AB
cf5(6) -- Thru
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The attachment configuration for the station or
concentrator (refer to ANSI SMT 9.7.4.3)."
REFERENCE
"ANSI { fddiSMT 42 }"
::= { snmpFddiSMTEntry 16 }
snmpFddiSMTHoldState OBJECT-TYPE
SYNTAX INTEGER {
not-implemented(1), -- holding not implemented
not-holding(2),
holding-prm(3), -- holding on primary
holding-sec(4) -- holding on secondary
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the current state of the
Hold function. The values are determined as
follows: 'holding-prm' is set if the primary ring
is operational and the Recovery Enable Flag is
clear (NOT NO_Flag(primary) AND NOT RE_Flag). is
set if the secondary ring is operational and the
Recovery Enable Flag is clear (NOT
NO_Flag(secondary) AND NOT RE_Flag). Ref 9.4.3.
and 10.3.1. the primary or secondary, i.e., the
Recovery Enable, RE_Flag, is set."
REFERENCE
"ANSI { fddiSMT 43 }"
::= { snmpFddiSMTEntry 17 }
snmpFddiSMTRemoteDisconnectFlag OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A flag indicating that the station was remotely
disconnected from the network. A station requires
a Connect Action (SM_CM_CONNECT.request (Connect))
to rejoin and clear the flag (refer to ANSI
Case [Page 13]
RFC 1285 FDDI MIB January 1992
6.4.5.2)."
REFERENCE
"ANSI { fddiSMT 44 }"
::= { snmpFddiSMTEntry 18 }
snmpFddiSMTStationAction OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
connect(2),
disconnect(3),
path-Test(4),
self-Test(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object, when read, always returns a value of
other(1). The behavior of setting this variable
to each of the acceptable values is as follows:
Other: Results in a badValue error.
Connect: Generates an
SM_CM_Connect.request(connect) signal to CMT
indicating that the ECM State machine is to begin
a connection sequence. The
fddiSMTRemoteDisconnectFlag is cleared on the
setting of this variable to 1. See ANSI Ref
9.3.1.1.
Disconnect: Generates an
SM_CM_Connect.request(disconnect) signal to ECM
and sets the fddiSMTRemoteDisconnectFlag. See
ANSI Ref 9.3.1.1.
Path-Test: Initiates a station path test.
The Path_Test variable (See ANSI Ref. 9.4.1) is
set to Testing. The results of this action are
not specified in this standard.
Self-Test: Initiates a station self test.
The results of this action are not specified in
this standard.
Attempts to set this object to all other values
results in a badValue error. Agents may elect to
return a badValue error on attempts to set this
variable to path-Test(4) or self-Test(5)."
Case [Page 14]
RFC 1285 FDDI MIB January 1992
REFERENCE
"ANSI { fddiSMT 60 }"
::= { snmpFddiSMTEntry 19 }
-- the MAC group
-- Implementation of the MAC Group is mandatory for all
-- systems which implement manageable FDDI subsystems.
snmpFddiMACNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of MAC implementations (across
all SMTs) on this network management application
entity. The value for this variable must remain
constant at least from one re-initialization of
the entity's network management system to the next
re-initialization."
::= { snmpFddiMAC 1 }
-- the MAC table
snmpFddiMACTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpFddiMACEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of MAC entries. The number of entries is
given by the value of snmpFddiMACNumber."
::= { snmpFddiMAC 2 }
snmpFddiMACEntry OBJECT-TYPE
SYNTAX SnmpFddiMACEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A MAC entry containing information common to a
given MAC."
INDEX { snmpFddiMACSMTIndex, snmpFddiMACIndex }
::= { snmpFddiMACTable 1 }
SnmpFddiMACEntry ::=
SEQUENCE {
snmpFddiMACSMTIndex
INTEGER,
Case [Page 15]
RFC 1285 FDDI MIB January 1992
snmpFddiMACIndex
INTEGER,
snmpFddiMACFrameStatusCapabilities
INTEGER,
snmpFddiMACTMaxGreatestLowerBound
FddiTime,
snmpFddiMACTVXGreatestLowerBound
FddiTime,
snmpFddiMACPathsAvailable
INTEGER,
snmpFddiMACCurrentPath
INTEGER,
snmpFddiMACUpstreamNbr
FddiMACLongAddressType,
snmpFddiMACOldUpstreamNbr
FddiMACLongAddressType,
snmpFddiMACDupAddrTest
INTEGER,
snmpFddiMACPathsRequested
INTEGER,
snmpFddiMACDownstreamPORTType
INTEGER,
snmpFddiMACSMTAddress
FddiMACLongAddressType,
snmpFddiMACTReq
FddiTime,
snmpFddiMACTNeg
FddiTime,
snmpFddiMACTMax
FddiTime,
snmpFddiMACTvxValue
FddiTime,
snmpFddiMACTMin
FddiTime,
snmpFddiMACCurrentFrameStatus
INTEGER,
snmpFddiMACFrameCts
Counter,
snmpFddiMACErrorCts
Counter,
snmpFddiMACLostCts
Counter,
snmpFddiMACFrameErrorThreshold
INTEGER,
snmpFddiMACFrameErrorRatio
INTEGER,
snmpFddiMACRMTState
INTEGER,
Case [Page 16]
RFC 1285 FDDI MIB January 1992
snmpFddiMACDaFlag
INTEGER,
snmpFddiMACUnaDaFlag
INTEGER,
snmpFddiMACFrameCondition
INTEGER,
snmpFddiMACChipSet
OBJECT IDENTIFIER,
snmpFddiMACAction
INTEGER
}
snmpFddiMACSMTIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the SMT index associated with this
MAC."
::= { snmpFddiMACEntry 1 }
snmpFddiMACIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each MAC on the managed
entity. The MAC identified by a particular value
of this index is that identified by the same value
of an ifIndex object instance. That is, if a MAC
is associated with the interface whose value of
ifIndex in the Internet-Standard MIB is equal to
5, then the value of snmpFddiMACIndex shall also
equal 5. The value for each MAC must remain
constant at least from one re-initialization of
the entity's network management system to the next
re-initialization."
::= { snmpFddiMACEntry 2 }
snmpFddiMACFrameStatusCapabilities OBJECT-TYPE
SYNTAX INTEGER (0..1799)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A value that indicates the MAC's bridge and end-
station capabilities for operating in a bridged
FDDI network.
Case [Page 17]
RFC 1285 FDDI MIB January 1992
The value is a sum. This value initially takes
the value zero, then for each capability present,
2 raised to a power is added to the sum. The
powers are according to the following table:
Capability Power
FSC-Type0 0
-- MAC repeats A/C indicators as received on
-- copying with the intent to forward.
FSC-Type1 1
-- MAC sets C but not A on copying for
-- forwarding.
FSC-Type2 2
-- MAC resets C and sets A on C set and
-- A reset if the frame is not copied and the
-- frame was addressed to this MAC
FSC-Type0-programmable 8
-- Type0 capability is programmable
FSC-Type1-programmable 9
-- Type1 capability is programmable
FSC-Type2-programmable 10
-- Type2 capability is programmable
"
REFERENCE
"ANSI { fddiMAC 11 }"
::= { snmpFddiMACEntry 3 }
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -