rfc2051.txt

RFC 的详细文档！

--              INITIALIZE_SESSION_LIMIT
--              CHANGE_SESSION_LIMIT
--              RESET_SESSION_LIMIT
--
--
-- ******************************************************************
appcCnosControl OBJECT IDENTIFIER ::= { appcGlobal 4 }


appcCnosCommand OBJECT-TYPE
      SYNTAX INTEGER {
                      initSesslimit(1),
                      changeSesslimit(2),
                      resetSesslimit(3)
                     }
      MAX-ACCESS read-write
      STATUS current



Allen, et. al.              Standards Track                    [Page 20]

RFC 2051              SNANAU APPC MIB using SMIv2           October 1996


      DESCRIPTION
          "Specifies the CNOS command or verb to issue.  First set the
          values of the particular CNOS parameter objects (from the range
          { appcCnosControl 2 } through { appcCnosControl 8 }) that apply
          to the CNOS command to be executed, set the three CNOS target
          objects ({ appcCnosControl 9 } through { appcCnosControl 11 }),
          then set this object to the command to be executed.

          Here is the list of parameter objects that must be set for each
          of the CNOS commands:

             INIT_SESSION_LIMIT -
                appcCnosMaxSessLimit
                appcCnosMinCwinLimit
                appcCnosMinClosLimit
                appcCnosTargetLocLuName
                appcCnosTargetParLuName
                appcCnosTargetModeName

             CHANGE_SESSION_LIMIT -
                appcCnosMaxSessLimit
                appcCnosMinCwinLimit
                appcCnosMinClosLimit
                appcCnosResponsible
                appcCnosTargetLocLuName
                appcCnosTargetParLuName
                appcCnosTargetModeName

             RESET_SESSION_LIMIT -
                appcCnosResponsible
                appcCnosDrainPart
                appcCnosForce
                appcCnosTargetLocLuName
                appcCnosTargetParLuName
                appcCnosTargetModeName
          "

      ::= { appcCnosControl 1 }

appcCnosMaxSessLimit OBJECT-TYPE
      SYNTAX Integer32
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
          "Specifies the maximum value that the local LU is to use,
          during CNOS processing, for the session limit.  The local LU,
          as a target LU, will negotiate a higher session limit it
          receives in the CNOS request down to this maximum value.  The



Allen, et. al.              Standards Track                    [Page 21]

RFC 2051              SNANAU APPC MIB using SMIv2           October 1996


          local LU, as a source LU, will restrict the session limit it
          sends in a CNOS request to a value less than or equal to this
          maximum value.

           If set (i.e., greater than 0), this overrides the maximum
           session limit defined in the appcModeAdminTable.

           This parameter should be set to the desired value before
           setting the command (appcCnosCommand).

           This parameter applies to the INITIALIZE_SESSION_LIMIT and
           CHANGE_SESSION_LIMIT verbs."

      DEFVAL { 0 }

      ::= { appcCnosControl 2 }

appcCnosMinCwinLimit OBJECT-TYPE
      SYNTAX Integer32
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
          "Specifies the default minimum contention winner sessions
          limit.

          This parameter should be set to the desired value before
          setting the command (appcCnosCommand).

          This parameter applies to the INITIALIZE_SESSION_LIMIT and
          CHANGE_SESSION_LIMIT verbs."

      DEFVAL { 0 }

      ::= { appcCnosControl 3 }

appcCnosMinClosLimit OBJECT-TYPE
      SYNTAX Integer32
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
          "Specifies the default minimum contention loser sessions limit.

           This parameter should be set to the desired value before
           setting the command (appcCnosCommand).

           This parameter applies to the INITIALIZE_SESSION_LIMIT and
           CHANGE_SESSION_LIMIT verbs."




Allen, et. al.              Standards Track                    [Page 22]

RFC 2051              SNANAU APPC MIB using SMIv2           October 1996


      DEFVAL { 0 }

      ::= { appcCnosControl 4 }

appcCnosDrainSelf OBJECT-TYPE
      SYNTAX INTEGER {
                      no(1),
                      yes(2)
                     }
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
          "Specifies whether the local LU is draining its conversations
          for this mode.  When a mode session limit is reset (via a CNOS
          RESET_SESSION_LIMIT request), the local LU could be set to
          process all queued conversations before deactivating all of the
          sessions (using the SNA Bracket Initiation Stopped or BIS
          protocol).

          This parameter should be set to the desired value before
          setting the command (appcCnosCommand).

          This parameter applies only to the RESET_SESSION_LIMIT verb."

      DEFVAL { no }

      ::= { appcCnosControl 5 }

appcCnosDrainPart OBJECT-TYPE
      SYNTAX INTEGER {
                      no(1),
                      yes(2)
                     }
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
          "Specifies whether the partner LU is draining its conversations
          for this mode.  When a mode session limit is reset (via a CNOS
          RESET_SESSION_LIMIT request), the partner LU could be set to
          process all queued conversations before deactivating all of the
          sessions (using the SNA Bracket Initiation Stop or BIS
          protocol).

          This parameter should be set to the desired value before
          setting the command (appcCnosCommand).

          This parameter applies only to the RESET_SESSION_LIMIT verb."




Allen, et. al.              Standards Track                    [Page 23]

RFC 2051              SNANAU APPC MIB using SMIv2           October 1996


      DEFVAL { yes }

      ::= { appcCnosControl 6 }

appcCnosResponsible OBJECT-TYPE
      SYNTAX INTEGER {
                      source(1),
                      target(2)
                     }
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
          "Specifies which LU is responsible for selecting and
          deactivating sessions as a result of a change that decreases
          the session limit or the maximum number of contention winner
          sessions for the source or target LU.  If no session need to be
          deactivated, this parameter is ignored.

                source  -       specifies that the source (local) LU is
                                responsible.  The target (partner) LU
                                cannot negotiate this value.
                target  -       specifies that the target (partner) LU is
                                responsible. The target LU can negotiate
                                this value to source.

           This parameter should be set to the desired value before
           setting the command (appcCnosCommand).

           This parameter applies to the RESET_SESSION_LIMIT and
           CHANGE_SESSION_LIMIT verbs."

      DEFVAL { source }

      ::= { appcCnosControl 7 }

appcCnosForce OBJECT-TYPE
      SYNTAX INTEGER {
                      no(1),
                      yes(2)
                     }
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
          "Specifies whether the local LU should force the resetting of
          the session limit when certain error conditions occur that
          prevent the successful exchange of CNOS request and reply.

           This parameter should be set to the desired value before



Allen, et. al.              Standards Track                    [Page 24]

RFC 2051              SNANAU APPC MIB using SMIv2           October 1996


           setting the command (appcCnosCommand).

           This parameter applies only to the RESET_SESSION_LIMIT verb."

      DEFVAL { no }

      ::= { appcCnosControl 8 }

appcCnosTargetLocLuName OBJECT-TYPE
      SYNTAX DisplayString (SIZE (1..17))
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
          "The SNA name of the local LU to which the CNOS command is
           to be applied. This field is from 1 to 17 characters in
           length, including a period (.) which separates the
           NetId from the NAU name if the NetId is present.

           This object should be set to the desired value before setting
           the command (appcCnosCommand).

           This parameter applies to all CNOS verbs."

      ::= { appcCnosControl 9 }

appcCnosTargetParLuName OBJECT-TYPE
      SYNTAX DisplayString (SIZE (1..17))
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
          "The SNA name of the partner LU to which the CNOS command is
           to be applied. This field is from 1 to 17 characters in
           length, including a period (.) which separates the
           NetId from the NAU name if the NetId is present.

           This object should be set to the desired value before setting
           the command (appcCnosCommand).

           This parameter applies to all CNOS verbs."

      ::= { appcCnosControl 10 }

appcCnosTargetModeName OBJECT-TYPE
      SYNTAX DisplayString (SIZE (1..8))
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
          "Specifies the mode name to which the CNOS command is to be



Allen, et. al.              Standards Track                    [Page 25]

RFC 2051              SNANAU APPC MIB using SMIv2           October 1996


           applied.

           This object should be set to the desired value before setting
           the command (appcCnosCommand).

           This parameter applies to all CNOS verbs."

      ::= { appcCnosControl 11 }


-- *********************************************************************
--    APPC LU information
-- ---------------------------------------------------------------------
--  Local LU
--  Partner LU
--  Mode
-- *********************************************************************

-- *********************************************************************
--  APPC Local LU
--
--  The entries in the following tables provide information for
--  independent and dependent LU 6.2.
--
-- *********************************************************************

-- *********************************************************************
--    APPC Local LU Admin Table
--    Objects in this table contain default or expected configuration
--    values for local 6.2 LUs.
-- *********************************************************************

appcLluAdminTable OBJECT-TYPE
      SYNTAX SEQUENCE OF AppcLluAdminEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "APPC Local LU Admin Table."

      ::= { appcLu 1 }

appcLluAdminEntry OBJECT-TYPE
      SYNTAX AppcLluAdminEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "Information about local APPC LUs. "




Allen, et. al.              Standards Track                    [Page 26]

RFC 2051              SNANAU APPC MIB using SMIv2           October 1996


      INDEX { appcLluAdminName }

      ::= { appcLluAdminTable 1 }

AppcLluAdminEntry     ::= SEQUENCE {
        appcLluAdminName               DisplayString,