📄 rfc1180.txt
字号:
Network Working Group T. Socolofsky
Request for Comments: 1180 C. Kale
Spider Systems Limited
January 1991
A TCP/IP Tutorial
Status of this Memo
This RFC is a tutorial on the TCP/IP protocol suite, focusing
particularly on the steps in forwarding an IP datagram from source
host to destination host through a router. It does not specify an
Internet standard. Distribution of this memo is unlimited.
Table of Contents
1. Introduction................................................ 1
2. TCP/IP Overview............................................. 2
3. Ethernet.................................................... 8
4. ARP......................................................... 9
5. Internet Protocol........................................... 12
6. User Datagram Protocol...................................... 22
7. Transmission Control Protocol............................... 24
8. Network Applications........................................ 25
9. Other Information........................................... 27
10. References.................................................. 27
11. Relation to other RFCs...................................... 27
12. Security Considerations..................................... 27
13. Authors' Addresses.......................................... 28
1. Introduction
This tutorial contains only one view of the salient points of TCP/IP,
and therefore it is the "bare bones" of TCP/IP technology. It omits
the history of development and funding, the business case for its
use, and its future as compared to ISO OSI. Indeed, a great deal of
technical information is also omitted. What remains is a minimum of
information that must be understood by the professional working in a
TCP/IP environment. These professionals include the systems
administrator, the systems programmer, and the network manager.
This tutorial uses examples from the UNIX TCP/IP environment, however
the main points apply across all implementations of TCP/IP.
Note that the purpose of this memo is explanation, not definition.
If any question arises about the correct specification of a protocol,
please refer to the actual standards defining RFC.
Socolofsky & Kale [Page 1]
RFC 1180 A TCP/IP Tutorial January 1991
The next section is an overview of TCP/IP, followed by detailed
descriptions of individual components.
2. TCP/IP Overview
The generic term "TCP/IP" usually means anything and everything
related to the specific protocols of TCP and IP. It can include
other protocols, applications, and even the network medium. A sample
of these protocols are: UDP, ARP, and ICMP. A sample of these
applications are: TELNET, FTP, and rcp. A more accurate term is
"internet technology". A network that uses internet technology is
called an "internet".
2.1 Basic Structure
To understand this technology you must first understand the following
logical structure:
----------------------------
| network applications |
| |
|... \ | / .. \ | / ...|
| ----- ----- |
| |TCP| |UDP| |
| ----- ----- |
| \ / |
| -------- |
| | IP | |
| ----- -*------ |
| |ARP| | |
| ----- | |
| \ | |
| ------ |
| |ENET| |
| ---@-- |
----------|-----------------
|
----------------------o---------
Ethernet Cable
Figure 1. Basic TCP/IP Network Node
This is the logical structure of the layered protocols inside a
computer on an internet. Each computer that can communicate using
internet technology has such a logical structure. It is this logical
structure that determines the behavior of the computer on the
internet. The boxes represent processing of the data as it passes
through the computer, and the lines connecting boxes show the path of
Socolofsky & Kale [Page 2]
RFC 1180 A TCP/IP Tutorial January 1991
data. The horizontal line at the bottom represents the Ethernet
cable; the "o" is the transceiver. The "*" is the IP address and the
"@" is the Ethernet address. Understanding this logical structure is
essential to understanding internet technology; it is referred to
throughout this tutorial.
2.2 Terminology
The name of a unit of data that flows through an internet is
dependent upon where it exists in the protocol stack. In summary: if
it is on an Ethernet it is called an Ethernet frame; if it is between
the Ethernet driver and the IP module it is called a IP packet; if it
is between the IP module and the UDP module it is called a UDP
datagram; if it is between the IP module and the TCP module it is
called a TCP segment (more generally, a transport message); and if it
is in a network application it is called a application message.
These definitions are imperfect. Actual definitions vary from one
publication to the next. More specific definitions can be found in
RFC 1122, section 1.3.3.
A driver is software that communicates directly with the network
interface hardware. A module is software that communicates with a
driver, with network applications, or with another module.
The terms driver, module, Ethernet frame, IP packet, UDP datagram,
TCP message, and application message are used where appropriate
throughout this tutorial.
2.3 Flow of Data
Let's follow the data as it flows down through the protocol stack
shown in Figure 1. For an application that uses TCP (Transmission
Control Protocol), data passes between the application and the TCP
module. For applications that use UDP (User Datagram Protocol), data
passes between the application and the UDP module. FTP (File
Transfer Protocol) is a typical application that uses TCP. Its
protocol stack in this example is FTP/TCP/IP/ENET. SNMP (Simple
Network Management Protocol) is an application that uses UDP. Its
protocol stack in this example is SNMP/UDP/IP/ENET.
The TCP module, UDP module, and the Ethernet driver are n-to-1
multiplexers. As multiplexers they switch many inputs to one output.
They are also 1-to-n de-multiplexers. As de-multiplexers they switch
one input to many outputs according to the type field in the protocol
header.
Socolofsky & Kale [Page 3]
RFC 1180 A TCP/IP Tutorial January 1991
1 2 3 ... n 1 2 3 ... n
\ | / | \ | | / ^
\ | | / | \ | | / |
------------- flow ---------------- flow
|multiplexer| of |de-multiplexer| of
------------- data ---------------- data
| | | |
| v | |
1 1
Figure 2. n-to-1 multiplexer and 1-to-n de-multiplexer
If an Ethernet frame comes up into the Ethernet driver off the
network, the packet can be passed upwards to either the ARP (Address
Resolution Protocol) module or to the IP (Internet Protocol) module.
The value of the type field in the Ethernet frame determines whether
the Ethernet frame is passed to the ARP or the IP module.
If an IP packet comes up into IP, the unit of data is passed upwards
to either TCP or UDP, as determined by the value of the protocol
field in the IP header.
If the UDP datagram comes up into UDP, the application message is
passed upwards to the network application based on the value of the
port field in the UDP header. If the TCP message comes up into TCP,
the application message is passed upwards to the network application
based on the value of the port field in the TCP header.
The downwards multiplexing is simple to perform because from each
starting point there is only the one downward path; each protocol
module adds its header information so the packet can be de-
multiplexed at the destination computer.
Data passing out from the applications through either TCP or UDP
converges on the IP module and is sent downwards through the lower
network interface driver.
Although internet technology supports many different network media,
Ethernet is used for all examples in this tutorial because it is the
most common physical network used under IP. The computer in Figure 1
has a single Ethernet connection. The 6-byte Ethernet address is
unique for each interface on an Ethernet and is located at the lower
interface of the Ethernet driver.
The computer also has a 4-byte IP address. This address is located
at the lower interface to the IP module. The IP address must be
unique for an internet.
Socolofsky & Kale [Page 4]
RFC 1180 A TCP/IP Tutorial January 1991
A running computer always knows its own IP address and Ethernet
address.
2.4 Two Network Interfaces
If a computer is connected to 2 separate Ethernets it is as in Figure
3.
----------------------------
| network applications |
| |
|... \ | / .. \ | / ...|
| ----- ----- |
| |TCP| |UDP| |
| ----- ----- |
| \ / |
| -------- |
| | IP | |
| ----- -*----*- ----- |
| |ARP| | | |ARP| |
| ----- | | ----- |
| \ | | / |
| ------ ------ |
| |ENET| |ENET| |
| ---@-- ---@-- |
----------|-------|---------
| |
| ---o---------------------------
| Ethernet Cable 2
---------------o----------
Ethernet Cable 1
Figure 3. TCP/IP Network Node on 2 Ethernets
Please note that this computer has 2 Ethernet addresses and 2 IP
addresses.
It is seen from this structure that for computers with more than one
physical network interface, the IP module is both a n-to-m
multiplexer and an m-to-n de-multiplexer.
Socolofsky & Kale [Page 5]
RFC 1180 A TCP/IP Tutorial January 1991
1 2 3 ... n 1 2 3 ... n
\ | | / | \ | | / ^
\ | | / | \ | | / |
------------- flow ---------------- flow
|multiplexer| of |de-multiplexer| of
------------- data ---------------- data
/ | | \ | / | | \ |
/ | | \ v / | | \ |
1 2 3 ... m 1 2 3 ... m
Figure 4. n-to-m multiplexer and m-to-n de-multiplexer
It performs this multiplexing in either direction to accommodate
incoming and outgoing data. An IP module with more than 1 network
interface is more complex than our original example in that it can
forward data onto the next network. Data can arrive on any network
interface and be sent out on any other.
TCP UDP
\ /
\ /
--------------
| IP |
| |
| --- |
| / \ |
| / v |
--------------
/ \
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -