rfc2758.txt

RFC 的详细文档！

   slapmPolicyTrapFilter   OBJECT-TYPE
      SYNTAX      Integer32 (0..64)
      UNITS       "intervals"



White                         Experimental                     [Page 12]

RFC 2758                       SLAPM-MIB                   February 2000


      MAX-ACCESS  read-write
      STATUS      current
      DESCRIPTION
         "The purpose of this object is to suppress unnecessary
         slapmSubcMonitorNotOkay (or
         slapmSubcomponentMonitoredEventNotAchieved), for example,
         notifications.  Basically, a monitored event has to
         not meet its SLA requirement for the number of
         consecutive intervals indicated by the value of this
         object."
      DEFVAL { 3 }
      ::= { slapmBaseObjects 8 }

   slapmTableObjects    OBJECT IDENTIFIER ::= { slapmObjects 2 }

   -- Sla Performance Monitoring Policy Statistics Table

   slapmPolicyStatsTable OBJECT-TYPE
      SYNTAX SEQUENCE OF SlapmPolicyStatsEntry
      MAX-ACCESS not-accessible
      STATUS deprecated
      DESCRIPTION
          "Provides statistics on all policies known at a
          system.

          This table has been deprecated and replaced with
          the slapmPolicyRuleStatsTable.  Older implementations of
          this MIB are expected to continue their support of this
          table."
     ::= { slapmTableObjects 1 }

   slapmPolicyStatsEntry OBJECT-TYPE
      SYNTAX SlapmPolicyStatsEntry
      MAX-ACCESS not-accessible
      STATUS deprecated
      DESCRIPTION
          "Defines an entry in the slapmPolicyStatsTable.  This table
          defines a set of statistics that is kept on a per system,
          policy and traffic profile basis.  A policy can be
          defined to contain multiple traffic profiles that map to
          a single action.

          Entries in this table are not created or deleted via SNMP
          but reflect the set of policy definitions known at a system."
      INDEX {
             slapmPolicyStatsSystemAddress,
             slapmPolicyStatsPolicyName,
             slapmPolicyStatsTrafficProfileName



White                         Experimental                     [Page 13]

RFC 2758                       SLAPM-MIB                   February 2000


            }
      ::= { slapmPolicyStatsTable 1 }

   SlapmPolicyStatsEntry ::=
      SEQUENCE {
          slapmPolicyStatsSystemAddress      OCTET STRING,
          slapmPolicyStatsPolicyName         SlapmNameType,
          slapmPolicyStatsTrafficProfileName SlapmNameType,
          slapmPolicyStatsOperStatus         INTEGER,
          slapmPolicyStatsActiveConns        Gauge32,
          slapmPolicyStatsTotalConns         Counter32,
          slapmPolicyStatsFirstActivated     DateAndTime,
          slapmPolicyStatsLastMapping        DateAndTime,
          slapmPolicyStatsInOctets           Counter32,
          slapmPolicyStatsOutOctets          Counter32,
          slapmPolicyStatsConnectionLimit    Integer32,
          slapmPolicyStatsCountAccepts       Counter32,
          slapmPolicyStatsCountDenies        Counter32,
          slapmPolicyStatsInDiscards         Counter32,
          slapmPolicyStatsOutDiscards        Counter32,
          slapmPolicyStatsInPackets          Counter32,
          slapmPolicyStatsOutPackets         Counter32,
          slapmPolicyStatsInProfileOctets    Counter32,
          slapmPolicyStatsOutProfileOctets   Counter32,
          slapmPolicyStatsMinRate            Integer32,
          slapmPolicyStatsMaxRate            Integer32,
          slapmPolicyStatsMaxDelay           Integer32
      }

   slapmPolicyStatsSystemAddress OBJECT-TYPE
      SYNTAX      OCTET STRING (SIZE(0 | 4 | 16))
      MAX-ACCESS  not-accessible
      STATUS      deprecated
      DESCRIPTION
         "Address of a system that an Policy definition relates to.
         A zero length octet string must be used to indicate that
         only a single system is being represented.
         Otherwise, the length of the octet string must be
         4 for an ipv4 address or 16 for an ipv6 address."
      ::= { slapmPolicyStatsEntry 1 }

   slapmPolicyStatsPolicyName OBJECT-TYPE
      SYNTAX      SlapmNameType
      MAX-ACCESS  not-accessible
      STATUS      deprecated
      DESCRIPTION
         "Policy name that this entry relates to."
      ::= { slapmPolicyStatsEntry 2 }



White                         Experimental                     [Page 14]

RFC 2758                       SLAPM-MIB                   February 2000


   slapmPolicyStatsTrafficProfileName OBJECT-TYPE
      SYNTAX      SlapmNameType
      MAX-ACCESS  not-accessible
      STATUS      deprecated
      DESCRIPTION
         "The name of a traffic profile that is associated with
         a policy."
      ::= { slapmPolicyStatsEntry 3 }

   slapmPolicyStatsOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                             inactive(1),
                             active(2),
                             deleteNeeded(3)
                          }
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
         "The state of a policy entry:

           inactive(1)      - An policy entry was either defined
                              by local system definition or
                              discovered via a directory search
                              but has not been activated (not
                              currently being used).
           active(2)        - Policy entry is being used to affect
                              traffic flows.
           deleteNeeded(3)  - Either though local implementation
                              dependent methods or by discovering
                              that the directory entry corresponding
                              to this table entry no longer
                              exists and slapmPolicyPurgeTime needs
                              to expire before attempting to remove
                              the corresponding slapmPolicyStatsEntry
                              and any dependent slapmPolicyMonitor
                              table entries.
         Note: a policy traffic profile in a state other than
         active(1) is not being used to affect traffic flows."
      ::= { slapmPolicyStatsEntry 4 }

   slapmPolicyStatsActiveConns OBJECT-TYPE
      SYNTAX      Gauge32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
         "The number of active TCP connections that are
         affected by the corresponding policy entry."
      ::= { slapmPolicyStatsEntry 5 }



White                         Experimental                     [Page 15]

RFC 2758                       SLAPM-MIB                   February 2000


   slapmPolicyStatsTotalConns OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
         "The number of total TCP connections that are
         affected by the corresponding policy entry."
      ::= { slapmPolicyStatsEntry 6 }

   slapmPolicyStatsFirstActivated OBJECT-TYPE
      SYNTAX      DateAndTime
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
         "The timestamp for when the corresponding policy entry
         is activated.  The value of this object serves as
         the discontinuity event indicator when polling entries
         in this table.  The value of this object is updated on
         transition of slapmPolicyStatsOperStatus into the active(2)
         state."
      DEFVAL { '0000000000000000'H }
      ::= { slapmPolicyStatsEntry 7 }

   slapmPolicyStatsLastMapping OBJECT-TYPE
      SYNTAX      DateAndTime
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
         "The timestamp for when the last time
         that the associated policy entry was used."
      DEFVAL { '0000000000000000'H }
      ::= { slapmPolicyStatsEntry 8 }

   slapmPolicyStatsInOctets OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
         "The number of octets that was received by IP for an
         entity that map to this entry."
      ::= { slapmPolicyStatsEntry 9 }

   slapmPolicyStatsOutOctets OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
         "The number of octets that was transmitted by IP for an



White                         Experimental                     [Page 16]

RFC 2758                       SLAPM-MIB                   February 2000


         entity that map to this entry."
      ::= { slapmPolicyStatsEntry 10 }

   slapmPolicyStatsConnectionLimit OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
         "The limit for the number of active TCP connections that
         are allowed for this policy definition.  A value of zero
         for this object implies that a connection limit has not
         been specified."
      ::= { slapmPolicyStatsEntry 11 }

   slapmPolicyStatsCountAccepts OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "This counter is incremented when a policy action's
          Permission value is set to Accept and a session
          (TCP connection) is accepted."
      ::= { slapmPolicyStatsEntry 12 }

   slapmPolicyStatsCountDenies OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "This counter is incremented when a policy action's
          Permission value is set to Deny and a session is denied,
          or when a session (TCP connection) is rejected due to a
          policy's connection limit (slapmPolicyStatsConnectLimit)
          being reached."
      ::= { slapmPolicyStatsEntry 13 }

   slapmPolicyStatsInDiscards OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "This counter counts the number of in octets discarded.
          This occurs when an error is detected.  Examples of this
          are buffer overflow, checksum error, or bad packet
          format."
      ::= { slapmPolicyStatsEntry 14 }

   slapmPolicyStatsOutDiscards OBJECT-TYPE



White                         Experimental                     [Page 17]

RFC 2758                       SLAPM-MIB                   February 2000


      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "This counter counts the number of out octets discarded.
          Examples of this are buffer overflow, checksum error, or
          bad packet format."
      ::= { slapmPolicyStatsEntry 15 }

   slapmPolicyStatsInPackets OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "This counter counts the number of in packets received
          that relate to this policy entry from IP."
      ::= { slapmPolicyStatsEntry 16 }

   slapmPolicyStatsOutPackets OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "This counter counts the number of out packets sent
          by IP that relate to this policy entry."
      ::= { slapmPolicyStatsEntry 17 }

   slapmPolicyStatsInProfileOctets OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "This counter counts the number of in octets that are
          determined to be within profile."
      ::= { slapmPolicyStatsEntry 18 }

   slapmPolicyStatsOutProfileOctets OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION