📄 rfc2457.txt
字号:
Clouston & Moore Standards Track [Page 7]
RFC 2457 Extended Border Node MIB November 1998
3.1.4 ebnCos group
The ebnCos group contains the ebnCosMapTable, which specifies how COS
values are mapped between the non-native subnetwork and the native
subnetwork.
3.1.5 ebnSubnetRoutingList group
The ebnSubnetRoutingList group contains information about the
customer-supplied EBN subnetwork routing list, which indicates to
which adjacent nodes an EBN will forward LOCATE search requests. It
consists of the following tables:
1. ebnSubnetSearchTable
This table has an entry for each LU name that has a defined
subnet routing list. The LU name may identify a single LU, or it
may contain a wildcard character that could identify a group of
LUs (partial wildcard) or all LUs (full wildcard). The objects
in the table indicate whether the EBN may add dynamic entries to
the subnet routing list, and whether the subnet routing list
entries may be reordered for better search performance.
2. ebnSearchTable
This table has an entry for each control point name which is
included in a multi-subnet search for a particular LU name. The
index to the table is the LU name to be searched for, and an
index which lists the order in which the CP names are to be
searched. Both the CP name and the LU name entries in the table
allow for partial and full wildcards. The CP name also allows
for special entries that indicate that the EBN will search
itself and its own native subnetwork at this point in the search,
or will search all native EBNs.
3.1.6 hbn group
The hbn group contains information about HBN (HPR EBN) intermediate
sessions. The hbnIsInTable is an extension to the appnIsInTable.
This table is present for intermediate sessions when there are back-
to-back RTP (Rapid Transport Protocol) connections in an HBN. It
provides the NCE ID (network connection endpoint identifier) and TCID
(transport connection identifier) for the second RTP connection.
Clouston & Moore Standards Track [Page 8]
RFC 2457 Extended Border Node MIB November 1998
4.0 Definitions
EBN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
DisplayString, TEXTUAL-CONVENTION
FROM SNMPv2-TC
SnaControlPointName
-- Because the characters allowed in an SNA control
-- point name come from a restricted character set,
-- these names are not subject to internationalization.
FROM APPN-MIB
snanauMIB
FROM SNA-NAU-MIB;
ebnMIB MODULE-IDENTITY
LAST-UPDATED "9804281800Z" -- April 28, 1998
ORGANIZATION "IETF SNA NAU MIB WG / AIW APPN MIBs SIG"
CONTACT-INFO
"
Bob Clouston
Cisco Systems
7025 Kit Creek Road
P.O. Box 14987
Research Triangle Park, NC 27709, USA
Tel: 1 919 472 2333
E-mail: clouston@cisco.com
Bob Moore
IBM Corporation
BRQA/501
P.O. Box 12195
Research Triangle Park, NC 27709, USA
Tel: 1 919 254 4436
E-mail: remoore@us.ibm.com
"
DESCRIPTION
" The MIB Module for Extended Border Node"
::= { snanauMIB 7 }
-- snanauMIB ::= { mib-2 34 }
Clouston & Moore Standards Track [Page 9]
RFC 2457 Extended Border Node MIB November 1998
-- ******************************************************************
-- Textual Conventions
-- ------------------------------------------------------------------
SnaNAUWildcardName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Fully-qualified network NAU name. Entries take one of three
forms:
- Explicit entries do not contain the character '*'.
- Partial Wildcard entries have the form 'ccc*', where
'ccc' represents one to sixteen characters in a legal
SNA NAU Name.
- A full wildcard consists of a single character '*'.
Because the characters allowed in an SNA NAU name come from
a restricted character set, these names are not subject to
internationalization."
SYNTAX DisplayString(SIZE(1..17))
-- ******************************************************************
ebnObjects OBJECT IDENTIFIER ::= { ebnMIB 1 }
-- ******************************************************************
-- ******************************************************************
-- EBN Directory Group
-- The ebnDirTable is an extension to the appnDirTable. It specifies
-- the subnet affiliation for LUs in the EBN's directory.
-- ******************************************************************
ebnDir OBJECT IDENTIFIER ::= { ebnObjects 1 }
ebnDirTable OBJECT-TYPE
SYNTAX SEQUENCE OF EbnDirEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The EBN Directory Table. This table is an extension
to the APPN MIB's appnDirTable. Entries in this table
are in one-to-one correspondence with entries in the
appnDirTable, with corresponding entries having identical
values for their respective indexes."
::= { ebnDir 1 }
ebnDirEntry OBJECT-TYPE
SYNTAX EbnDirEntry
MAX-ACCESS not-accessible
Clouston & Moore Standards Track [Page 10]
RFC 2457 Extended Border Node MIB November 1998
STATUS current
DESCRIPTION
"Entry in the EBN Directory Table."
INDEX { ebnDirLuName }
::= { ebnDirTable 1 }
EbnDirEntry ::= SEQUENCE {
ebnDirLuName SnaNAUWildcardName,
ebnDirSubnetAffiliation INTEGER }
ebnDirLuName OBJECT-TYPE
SYNTAX SnaNAUWildcardName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Fully qualified network LU name in the domain of a serving
network node. If this object has the same value as the
appnDirLuName object in the APPN MIB, then the two objects
are referring to the same LU."
::= { ebnDirEntry 1 }
ebnDirSubnetAffiliation OBJECT-TYPE
SYNTAX INTEGER { native (1),
nonNative (2),
subarea (3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the subnetwork affiliation of the LU:
- native(1) : The LU is in the native APPN subnetwork.
- nonNative(2) : The LU is in a non-native APPN subnetwork.
- subarea(3) : The LU is in a subarea network."
::= { ebnDirEntry 2 }
-- ******************************************************************
-- EBN Intermediate Session RSCV Group
-- This table is a sparse extension to the appnIsInTable. For
-- sessions crossing ISTGs adjacent to the EBN, it contains the RSCV
-- and COS used in the direction of the BIND destination.
-- ******************************************************************
ebnIsRscv OBJECT IDENTIFIER ::= { ebnObjects 2 }
ebnIsRscvTable OBJECT-TYPE
Clouston & Moore Standards Track [Page 11]
RFC 2457 Extended Border Node MIB November 1998
SYNTAX SEQUENCE OF EbnIsRscvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The EBN Intermediate Session RSCV table. This table is an
extension to the appnIsInTable. It contains the RSCV and COS
used in the direction of the BIND destination. There is an
entry in this table for each session that traverses an ISTG
when it enters or leaves this EBN, with corresponding entries
having identical values for their respective indexes."
::= { ebnIsRscv 1}
ebnIsRscvEntry OBJECT-TYPE
SYNTAX EbnIsRscvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in ebnIsRscvTable."
INDEX { ebnIsRscvCpName,
ebnIsRscvPcid }
::= { ebnIsRscvTable 1 }
EbnIsRscvEntry ::= SEQUENCE {
ebnIsRscvCpName SnaControlPointName,
ebnIsRscvPcid OCTET STRING,
ebnIsRscvDestinationRoute OCTET STRING,
ebnIsRscvDestinationCos DisplayString }
ebnIsRscvCpName OBJECT-TYPE
SYNTAX SnaControlPointName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network-qualified control point name of the node at
which the session and PCID originated. For APPN and LEN
nodes, this is either CP name of the APPN node at which
the origin LU is located or the CP name of the NN serving
the LEN node at which the origin LU is located. For DLUR
resources it is the name of the owning SSCP.
If this object has the same value as the appnIsInFqCpName
object in the APPN MIB, then the two objects are referring to
the same APPN control point."
::= { ebnIsRscvEntry 1 }
Clouston & Moore Standards Track [Page 12]
RFC 2457 Extended Border Node MIB November 1998
ebnIsRscvPcid OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The procedure correlation identifier (PCID) of a session.
It is an 8-octet value.
If this object has the same value as the appnIsInPcid object
in the APPN MIB, and if the corresponding ebnIsRscvCpName
object has the same value as the corresponding
appnIsInFqCpName object, then the entries indexed by these
objects are referring to the same session."
::= { ebnIsRscvEntry 2 }
ebnIsRscvDestinationRoute OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route selection control vector (RSCV x'2B') used in the
direction towards the SLU."
::= { ebnIsRscvEntry 3 }
ebnIsRscvDestinationCos OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Class of Service (COS) name used in the direction
towards the SLU.
Because the characters allowed in an SNA COS name come from
a restricted character set, these names are not subject to
internationalization."
::= { ebnIsRscvEntry 4 }
-- ******************************************************************
-- EBN Directory Config Group
-- The following simple objects provide information about EBN
-- directory.
-- ******************************************************************
ebnDirConfig OBJECT IDENTIFIER ::= { ebnObjects 3 }
Clouston & Moore Standards Track [Page 13]
RFC 2457 Extended Border Node MIB November 1998
ebnSearchCacheTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time in minutes an extended border node will
retain information about a multi-subnetwork search, once
that that search terminates. A value 0 indicates that the
EBN has no defined limit, and the number of entries is
bounded only by memory."
::= { ebnDirConfig 1 }
ebnMaxSearchCache OBJECT-TYPE
SYNTAX Unsigned32
UNITS "entries"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of multi-subnet entries to be cached.
The value 0 indicates that the local node has no defined
limit, and the number of entries is bounded only by
memory."
::= { ebnDirConfig 2 }
ebnDefaultSubnetVisitCount OBJECT-TYPE
SYNTAX Unsigned32
UNITS "topology subnetworks"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default maximum number of subnetworks a LOCATE search
procedure may traverse."
::= { ebnDirConfig 3 }
-- ******************************************************************
-- EBN COS Mapping Group
-- The ebnCosMap Table specifies how non-native COS values are mapped
-- to COS values defined in the native subnetwork. The COS mappings
-- that an EBN performs are determined by multiple factors, one of
-- which is a set of user-defined mappings. This table returns the
-- COS mappings that the EBN is actually performing, rather than
-- the user-defined mappings.
-- ******************************************************************
Clouston & Moore Standards Track [Page 14]
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -