hal_arm_arm9_ep9301.cdl

ecos实时嵌入式操作系统

# ====================================================================
#
#      hal_arm_arm9_ep93xx.cdl
#
#      Cirrus Logic ARM9/EP93XX platform HAL package configuration data
#
# ====================================================================
#####COPYRIGHTBEGIN####
#                                                                          
# -------------------------------------------                              
# The contents of this file are subject to the Red Hat eCos Public License 
# Version 1.1 (the "License"); you may not use this file except in         
# compliance with the License.  You may obtain a copy of the License at    
# http://www.redhat.com/                                                   
#                                                                          
# Software distributed under the License is distributed on an "AS IS"      
# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
# License for the specific language governing rights and limitations under 
# the License.                                                             
#                                                                          
# The Original Code is eCos - Embedded Configurable Operating System,      
# released September 30, 1998.                                             
#                                                                          
# The Initial Developer of the Original Code is Red Hat.                   
# Portions created by Red Hat are                                          
# Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc.                             
# All Rights Reserved.                                                     
# -------------------------------------------                              
#                                                                          
#####COPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      gthomas
# Original data:  gthomas
# Contributors:
# Date:           2001-04-23
#
#####DESCRIPTIONEND####
#
# ====================================================================
cdl_package CYGPKG_HAL_ARM_ARM9_EP9301 {
    display       "Cirrus Logic ARM9/EP9301 evaluation board"
    parent        CYGPKG_HAL_ARM_ARM9
    requires      CYGPKG_HAL_ARM_ARM9_ARM920T
    hardware
    include_dir   cyg/hal
    define_header hal_arm_arm9_ep93xx.h
    description   "
        This HAL platform package provides generic
        support for the Cirrus Logic EP9301 based boards."

    compile       ep93xx_misc.c hal_diag.c 

    implements    CYGINT_HAL_DEBUG_GDB_STUBS
    implements    CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
    implements    CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT

    define_proc {
        puts $::cdl_system_header "#define CYGBLD_HAL_TARGET_H   <pkgconf/hal_arm.h>"
        puts $::cdl_system_header "#define CYGBLD_HAL_VARIANT_H  <pkgconf/hal_arm_arm9.h>"
        puts $::cdl_system_header "#define CYGBLD_HAL_PLATFORM_H <pkgconf/hal_arm_arm9_ep93xx.h>"
		puts $::cdl_header "#define HAL_PLATFORM_CPU    \"ARM920T\""
        puts $::cdl_header "#define HAL_PLATFORM_BOARD  \"Cirrus Logic EDB9301 Board\""
        puts $::cdl_header "#define HAL_PLATFORM_EXTRA  \"Rev A\""
        puts $::cdl_header "#define HAL_PLATFORM_EP9301"
        puts $::cdl_header "#define HAL_PLATFORM_MACHINE_TYPE  454"
        puts $::cdl_header "#define CYGHWR_REDBOOT_ARM_TRAMPOLINE_ADDRESS 0x00200000"
    }

    cdl_component CYG_HAL_STARTUP {
        display       "Startup type"
        flavor        data
        default_value {"RAM"}
        legal_values  {"RAM" "ROMRAM" }
	no_define
	define -file system.h CYG_HAL_STARTUP
        description   "
           When targetting the EP93xx eval board it is possible to build
           the system for either RAM bootstrap or ROM bootstrap(s). Select
           'ram' when building programs to load into RAM using eCos GDB
           stubs.  Select 'rom' when building a stand-alone application
           which will be put into ROM, or for the special case of
           building the eCos GDB stubs themselves."
    }

    # Real-time clock/counter specifics
    cdl_component CYGNUM_HAL_RTC_CONSTANTS {
        display       "Real-time clock constants"
        flavor        none
        no_define
    
        cdl_option CYGNUM_HAL_RTC_NUMERATOR {
            display       "Real-time clock numerator"
            flavor        data
            calculated    1000000000
        }
        cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
            display       "Real-time clock denominator"
            flavor        data
            calculated    100
        }
        cdl_option CYGNUM_HAL_RTC_PERIOD {
            display       "Real-time clock period"
            flavor        data
            calculated    (5120)                    ;# Assumes 512KHz clock
        }
    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
        display       "Diagnostic serial port baud rate"
        flavor        data
        legal_values  9600 19200 38400 57600 115200
        default_value 57600
        description   "
            This option selects the baud rate used for the diagnostic port.
            Note: this should match the value chosen for the GDB port if the
            diagnostic and GDB port are the same."
    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
        display       "GDB serial port baud rate"
        flavor        data
        legal_values  9600 19200 38400 57600 115200
        default_value 57600
        description   "
            This option selects the baud rate used for the diagnostic port.
            Note: this should match the value chosen for the GDB port if the
            diagnostic and GDB port are the same."
    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
        display      "Number of communication channels on the board"
        flavor       data
        calculated   1
    }
 
    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
        display          "Debug serial port"
        active_if        CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
        flavor data
        legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
        default_value    0
        description      "
            The ep93xx board has three serial ports. This option
            chooses which port will be used to connect to a host
            running GDB."
     }
 
     cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
         display          "Diagnostic serial port"
         active_if        CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
         flavor data
         legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
         default_value    0
         description      "
            The ep93xx board has three serial ports.  This option
            chooses which port will be used for diagnostic output."
     }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
        display      "Default console channel."
        flavor       data
        legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
        calculated   0
    }
 
    cdl_component CYGBLD_GLOBAL_OPTIONS {
        display "Global build options"
        flavor  none
        no_define
        description   "
	    Global build options including control over
	    compiler flags, linker flags and choice of toolchain."


        parent  CYGPKG_NONE

        cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
            display "Global command prefix"
            flavor  data
            no_define
            default_value { "arm-elf" }
            description "
                This option specifies the command prefix used when
                invoking the build tools."
        }

        cdl_option CYGBLD_GLOBAL_CFLAGS {
            display "Global compiler flags"
            flavor  data
            no_define