xunzip.cpp

压缩/解压缩类源码

// XUnzip.cpp  Version 1.1
//
// Authors:      Mark Adler et al. (see below)
//
// Modified by:  Lucian Wischik
//               [e-mail]
//
// Version 1.0   - Turned C files into just a single CPP file
//               - Made them compile cleanly as C++ files
//               - Gave them simpler APIs
//               - Added the ability to zip/unzip directly in memory without 
//                 any intermediate files
// 
// Modified by:  Hans Dietrich
//               [e-mail]
//
// Version 1.1:  - Added Unicode support to CreateZip() and ZipAdd()
//               - Changed file names to avoid conflicts with Lucian's files
//
///////////////////////////////////////////////////////////////////////////////
//
// Lucian Wischik's comments:
// --------------------------
// THIS FILE is almost entirely based upon code by Info-ZIP.
// It has been modified by Lucian Wischik.
// The original code may be found at http://www.info-zip.org
// The original copyright text follows.
//
///////////////////////////////////////////////////////////////////////////////
//
// Original authors' comments:
// ---------------------------
// This is version 2002-Feb-16 of the Info-ZIP copyright and license. The 
// definitive version of this document should be available at 
// ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely.
// 
// Copyright (c) 1990-2002 Info-ZIP.  All rights reserved.
//
// For the purposes of this copyright and license, "Info-ZIP" is defined as
// the following set of individuals:
//
//   Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois,
//   Jean-loup Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase,
//   Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz, 
//   David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko, 
//   Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs, 
//   Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian Spieler, 
//   Antoine Verheijen, Paul von Behren, Rich Wales, Mike White
//
// This software is provided "as is", without warranty of any kind, express
// or implied.  In no event shall Info-ZIP or its contributors be held liable
// for any direct, indirect, incidental, special or consequential damages
// arising out of the use of or inability to use this software.
//
// Permission is granted to anyone to use this software for any purpose,
// including commercial applications, and to alter it and redistribute it
// freely, subject to the following restrictions:
//
//    1. Redistributions of source code must retain the above copyright notice,
//       definition, disclaimer, and this list of conditions.
//
//    2. Redistributions in binary form (compiled executables) must reproduce 
//       the above copyright notice, definition, disclaimer, and this list of 
//       conditions in documentation and/or other materials provided with the 
//       distribution. The sole exception to this condition is redistribution 
//       of a standard UnZipSFX binary as part of a self-extracting archive; 
//       that is permitted without inclusion of this license, as long as the 
//       normal UnZipSFX banner has not been removed from the binary or disabled.
//
//    3. Altered versions--including, but not limited to, ports to new 
//       operating systems, existing ports with new graphical interfaces, and 
//       dynamic, shared, or static library versions--must be plainly marked 
//       as such and must not be misrepresented as being the original source.  
//       Such altered versions also must not be misrepresented as being 
//       Info-ZIP releases--including, but not limited to, labeling of the 
//       altered versions with the names "Info-ZIP" (or any variation thereof, 
//       including, but not limited to, different capitalizations), 
//       "Pocket UnZip", "WiZ" or "MacZip" without the explicit permission of 
//       Info-ZIP.  Such altered versions are further prohibited from 
//       misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or 
//       of the Info-ZIP URL(s).
//
//    4. Info-ZIP retains the right to use the names "Info-ZIP", "Zip", "UnZip",
//       "UnZipSFX", "WiZ", "Pocket UnZip", "Pocket Zip", and "MacZip" for its 
//       own source and binary releases.
//
///////////////////////////////////////////////////////////////////////////////


#define STRICT
#define WIN32_LEAN_AND_MEAN
#include <windows.h>
#include <time.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <tchar.h>
#include "XUnzip.h"

// THIS FILE is almost entirely based upon code by Jean-loup Gailly
// and Mark Adler. It has been modified by Lucian Wischik.
// The original code may be found at http://www.gzip.org/zlib/
// The original copyright text follows.
//
//
//
// zlib.h -- interface of the 'zlib' general purpose compression library
//  version 1.1.3, July 9th, 1998
//
//  Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler
//
//  This software is provided 'as-is', without any express or implied
//  warranty.  In no event will the authors be held liable for any damages
//  arising from the use of this software.
//
//  Permission is granted to anyone to use this software for any purpose,
//  including commercial applications, and to alter it and redistribute it
//  freely, subject to the following restrictions:
//
//  1. The origin of this software must not be misrepresented; you must not
//     claim that you wrote the original software. If you use this software
//     in a product, an acknowledgment in the product documentation would be
//     appreciated but is not required.
//  2. Altered source versions must be plainly marked as such, and must not be
//     misrepresented as being the original software.
//  3. This notice may not be removed or altered from any source distribution.
//
//  Jean-loup Gailly        Mark Adler
//  [e-mail]          [e-mail]
//
//
//  The data format used by the zlib library is described by RFCs (Request for
//  Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
//  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
//
//
//     The 'zlib' compression library provides in-memory compression and
//  decompression functions, including integrity checks of the uncompressed
//  data.  This version of the library supports only one compression method
//  (deflation) but other algorithms will be added later and will have the same
//  stream interface.
//
//     Compression can be done in a single step if the buffers are large
//  enough (for example if an input file is mmap'ed), or can be done by
//  repeated calls of the compression function.  In the latter case, the
//  application must provide more input and/or consume the output
//  (providing more output space) before each call.
//
//     The library also supports reading and writing files in gzip (.gz) format
//  with an interface similar to that of stdio.
//
//     The library does not install any signal handler. The decoder checks
//  the consistency of the compressed data, so the library should never
//  crash even in case of corrupted input.
//
// for more info about .ZIP format, see ftp://ftp.cdrom.com/pub/infozip/doc/appnote-970311-iz.zip
//   PkWare has also a specification at ftp://ftp.pkware.com/probdesc.zip

#define zmalloc(len) malloc(len)

#define zfree(p) free(p)

/*
void *zmalloc(unsigned int len)
{ char *buf = new char[len+32];
  for (int i=0; i<16; i++)
  { buf[i]=i;
    buf[len+31-i]=i;
  }
  *((unsigned int*)buf) = len;
  char c[1000]; wsprintf(c,"malloc 0x%lx  - %lu",buf+16,len);
  OutputDebugString(c);
  return buf+16;
}

void zfree(void *buf)
{ char c[1000]; wsprintf(c,"free   0x%lx",buf);
  OutputDebugString(c);
  char *p = ((char*)buf)-16;
  unsigned int len = *((unsigned int*)p);
  bool blown=false;
  for (int i=0; i<16; i++)
  { char lo = p[i];
    char hi = p[len+31-i];
    if (hi!=i || (lo!=i && i>4)) blown=true;
  }
  if (blown)
  { OutputDebugString("BLOWN!!!");
  }
  delete[] p;
}
*/

#pragma warning(disable : 4702)   // unreachable code

typedef struct tm_unz_s
{ unsigned int tm_sec;            // seconds after the minute - [0,59]
  unsigned int tm_min;            // minutes after the hour - [0,59]
  unsigned int tm_hour;           // hours since midnight - [0,23]
  unsigned int tm_mday;           // day of the month - [1,31]
  unsigned int tm_mon;            // months since January - [0,11]
  unsigned int tm_year;           // years - [1980..2044]
} tm_unz;


// unz_global_info structure contain global data about the ZIPfile
typedef struct unz_global_info_s
{ unsigned long number_entry;         // total number of entries in the central dir on this disk
  unsigned long size_comment;         // size of the global comment of the zipfile
} unz_global_info;

// unz_file_info contain information about a file in the zipfile
typedef struct unz_file_info_s
{ unsigned long version;              // version made by                 2 bytes
  unsigned long version_needed;       // version needed to extract       2 bytes
  unsigned long flag;                 // general purpose bit flag        2 bytes
  unsigned long compression_method;   // compression method              2 bytes
  unsigned long dosDate;              // last mod file date in Dos fmt   4 bytes
  unsigned long crc;                  // crc-32                          4 bytes
  unsigned long compressed_size;      // compressed size                 4 bytes
  unsigned long uncompressed_size;    // uncompressed size               4 bytes
  unsigned long size_filename;        // filename length                 2 bytes
  unsigned long size_file_extra;      // extra field length              2 bytes
  unsigned long size_file_comment;    // file comment length             2 bytes
  unsigned long disk_num_start;       // disk number start               2 bytes
  unsigned long internal_fa;          // internal file attributes        2 bytes
  unsigned long external_fa;          // external file attributes        4 bytes
  tm_unz tmu_date;
} unz_file_info;


#define UNZ_OK                  (0)
#define UNZ_END_OF_LIST_OF_FILE (-100)
#define UNZ_ERRNO               (Z_ERRNO)
#define UNZ_EOF                 (0)
#define UNZ_PARAMERROR          (-102)
#define UNZ_BADZIPFILE          (-103)
#define UNZ_INTERNALERROR       (-104)
#define UNZ_CRCERROR            (-105)







#define ZLIB_VERSION "1.1.3"


// Allowed flush values; see deflate() for details
#define Z_NO_FLUSH      0
#define Z_SYNC_FLUSH    2
#define Z_FULL_FLUSH    3
#define Z_FINISH        4


// compression levels
#define Z_NO_COMPRESSION         0
#define Z_BEST_SPEED             1
#define Z_BEST_COMPRESSION       9
#define Z_DEFAULT_COMPRESSION  (-1)

// compression strategy; see deflateInit2() for details
#define Z_FILTERED            1
#define Z_HUFFMAN_ONLY        2
#define Z_DEFAULT_STRATEGY    0

// Possible values of the data_type field
#define Z_BINARY   0
#define Z_ASCII    1
#define Z_UNKNOWN  2

// The deflate compression method (the only one supported in this version)
#define Z_DEFLATED   8

// for initializing zalloc, zfree, opaque
#define Z_NULL  0

// case sensitivity when searching for filenames
#define CASE_SENSITIVE 1
#define CASE_INSENSITIVE 2


// Return codes for the compression/decompression functions. Negative
// values are errors, positive values are used for special but normal events.
#define Z_OK            0
#define Z_STREAM_END    1
#define Z_NEED_DICT     2
#define Z_ERRNO        (-1)
#define Z_STREAM_ERROR (-2)
#define Z_DATA_ERROR   (-3)
#define Z_MEM_ERROR    (-4)
#define Z_BUF_ERROR    (-5)
#define Z_VERSION_ERROR (-6)



// Basic data types
typedef unsigned char  Byte;  // 8 bits
typedef unsigned int   uInt;  // 16 bits or more
typedef unsigned long  uLong; // 32 bits or more
typedef void *voidpf;
typedef void     *voidp;
typedef long z_off_t;












typedef voidpf (*alloc_func) (voidpf opaque, uInt items, uInt size);
typedef void   (*free_func)  (voidpf opaque, voidpf address);

struct internal_state;

typedef struct z_stream_s {
    Byte    *next_in;  // next input byte
    uInt     avail_in;  // number of bytes available at next_in
    uLong    total_in;  // total nb of input bytes read so far

    Byte    *next_out; // next output byte should be put there
    uInt     avail_out; // remaining free space at next_out
    uLong    total_out; // total nb of bytes output so far

    char     *msg;      // last error message, NULL if no error
    struct internal_state *state; // not visible by applications

    alloc_func zalloc;  // used to allocate the internal state
    free_func  zfree;   // used to free the internal state
    voidpf     opaque;  // private data object passed to zalloc and zfree

    int     data_type;  // best guess about the data type: ascii or binary
    uLong   adler;      // adler32 value of the uncompressed data
    uLong   reserved;   // reserved for future use
} z_stream;

typedef z_stream *z_streamp;