network-mip6.conf.5.man

mobile ipv6协议Linux实现源代码

.TH network-mip6.conf 5 "30 September 2003" "@VERSION@"
.SH NAME
network-mip6.conf \- MIPL Mobile IPv6 main configuration file
.SH DESCRIPTION
.B network-mip6.conf
is the main configuration file for MIPL Mobile IPv6 kernel
module. This file is used by automatic startup script to set up
parameters for the kernel module.
.SH SYNTAX
Configuration file consists of option and value pairs: OPTION=value. 
Option name must be in all capitals. Value is case-insensitive.
.SH OPTIONS
.IP "FUNCTIONALITY"
Should this node act as a home agent (ha), mobile node (mn) or
correspondent node (cn). HA and MN both have CN functionality
embedded. Default: cn.
.IP "DEBUGLEVEL"
In error situations it may be desired to get more detailed
information what is happening. Increase this value to get more
messages from the module (default: 0).
.IP "TUNNEL_SITELOCAL"
Should unicasts to node's site-local address be tunneled when mobile
node is not in its home network (default: yes).
.IP "MIN_TUNNEL_NR"
Minimum number of free tunnel devices kept in cache on HA
Must be set to at least 1 for HA. To ensure successful 
bindings even during high work loads it could be set to a bigger 
value on the HA.
.IP "MAX_TUNNEL_NR"
Maximum number of free tunnel devices kept in cache on MN or HA
Must be set to at least 1 for HA. To improve performance
set it higher than MIN_TUNNEL_NR
.IP "HOMEADDRESS"
Home address for mobile node with prefix length which must be 128. Example:
3FFE:2620:6:1234:ABCD::1/128 (Don't use the example value!)
.IP "HOMEAGENT"
Home agent's address for mobile node with prefix length of the home
network. Note that only a prefix length of 64 for home network is
supported. Set this to 0::0/64 to activate dynamic home agent address
discovery in MN.
.IP "HOMEDEVICE"
Home address is assigned to an interface.  This option specifies which
interface is used. You should set this to mip6mnha1 which is a virtual
tunnel interface to which home address is moved at startup. The home
address will be later assigned automatically to any physical interface
that is in the home network. When MN moves away from its home network
or the network device is removed the address will be reassigned to the
virtual interface.
.SH EXAMPLES
.PP
  # Home Agent configuration file
  FUNCTIONALITY=ha
  DEBUGLEVEL=1
  TUNNEL_SITELOCAL=yes

  # Mobile Node configuration file
  FUNCTIONALITY=mn
  DEBUGLEVEL=1
  HOMEDEV=mip6mnha1	
  HOMEADDRESS=3ffe:2620:6:1234:abcd::2/128
  HOMEAGENT=3ffe:2620:6:1234:abcd::1/64
.PP
.SH AUTHOR
Antti J Tuominen <[e-mail]>
.SH "SEE ALSO"
.BR mipdiag(8)