ishmail.help

来自「linux下的E_MAIL客户端源码」· HELP 代码 · 共 1,525 行 · 第 1/5 页

*fileDataWin*charTF.quickHelp:\
   ASCII character set of the included data.
*fileDataWin*charCB.quickHelp:\
   List of possible character set names.
*fileDataWin*outNameTF.quickHelp:\
   Enter the name of the file as it should appear to the recipient. (optional)
*fileDataWin*octTypeTF.quickHelp:\
   Enter a modifier for application/octet-stream data (optional).
*fileDataWin*octPadTF.quickHelp:\
   Number of pad bits (required if your system byte size is other than 8).
*fileDataWin*otherText.quickHelp:\
   MIME parameters not otherwise specified can be entered here (optional).
*fileDataWin*hostTF.quickHelp:\
   Enter the name of the host on which the file resides.
*fileDataWin*dirTF.quickHelp:\
   Enter the name of the directory in which the file resides.
*fileDataWin*ftpModeAsciiTB.quickHelp:\
   The file will be transferred as ASCII data (conversion may be applied).
*fileDataWin*ftpModeImageTB.quickHelp:\
   The file will be transferred as binary data (no conversion).
*fileDataWin*ftpModeEbcdicTB.quickHelp:\
   Use this only if your system stores text data in EBCDIC rather than ASCII.
*fileDataWin*tftpModeNetAsciiTB.quickHelp:\
   The file will be transferred as ASCII data (conversion may be applied).
*fileDataWin*tftpModeOctet.quickHelp:\
   The file will be transferred as binary data (no conversion).
*fileDataWin*tftpModeMailTB.quickHelp:\
   The output file name should be an e-mail address.
*fileDataWin*serverTF.quickHelp:\
   Enter the e-mail address of the mail server.
*fileDataWin*subjectTF.quickHelp:\
   Enter the subject line to be sent to the mail server.
*fileDataWin*bodyText.quickHelp:\
   Enter the message (command) to be sent to the mail server.
*fileDataWin*expTF.quickHelp:\
   Enter a date after which the file will no longer be valid. (optional)
*fileDataWin*sizeTF.quickHelp:\
   Enter the size of the file (optional)
*fileDataWin*permRoTB.quickHelp:\
   Select this if the file should only be retrieved once by the recipient.
*fileDataWin*permRwTB.quickHelp:	\
   Select this if the file can be retrieved multiple times by the recipient.

!---------------------------------------------------------------------------

*saveCompositionWin*selectTextForm.selectTF.quickHelp:\
   Enter the name of a file to which the composition is to be saved

*loadCompositionWin*selectTextForm.selectTF.quickHelp:\
   Enter the name of a file to be loaded

!---------------------------------------------------------------------------

*sendPrefWin*bodyRowTF.quickHelp:\
   Specify how may rows to show of the message you are composing.
*sendPrefWin*bodyColTF.quickHelp:\
   Specify the width of the Composition window.
*sendPrefWin*headRowTF.quickHelp:\
   Specify how many rows to show in each of the header fields.
*sendPrefWin*wrapTB.quickHelp:\
   Insert "soft" newlines when typing past right margin.
*sendPrefWin*showCcTB.quickHelp:\
   Display, or hide, the Cc: field.
*sendPrefWin*showBccTB.quickHelp:\
   Display, or hide, the Bcc: field.
*sendPrefWin*showFccTB.quickHelp:\
   Display, or hide, the Fcc: field.
*sendPrefWin*showOtherTB.quickHelp:\
   Display, or hide, the field in which you can specify extra headers.
*sendPrefWin*emacsTB.quickHelp:\
   Set key bindings to work like the EMACS editor, else use Motif bindings.
*sendPrefWin*deleteTB.quickHelp:\
   Make the Delete key delete to the left, or delete from the right.
*sendPrefWin*spaceTB.quickHelp:\
   Insert commas automatically between addresses, or leave addresses as typed.
*sendPrefWin*showSettingsTB.quickHelp:\
   Show, or hide, the Selection buttons at the bottom of the Composition window.
*sendPrefWin*maxFields1TB.quickHelp:\
   Put all header fields on a single row at the top of the window.
*sendPrefWin*maxFields2TB.quickHelp:\
   Split header fields between two rows at the top of the window.
*sendPrefWin*maxFields3TB.quickHelp:\
   Split header fields among three rows at the top of the window.
*sendPrefWin*maxFields4TB.quickHelp:\
   Split header fields among four rows at the top of the window.
*sendPrefWin*maxFields5TB.quickHelp:\
   Split header fields among five rows at the top of the window.
*sendPrefWin*editorTF.quickHelp:\
   Specify an alternate editor to use for composing messages.
*sendPrefWin*spellTF.quickHelp:\
   Specify a command to use to check the spelling in your message.
*sendPrefWin*digSignTF.quickHelp:\
   Specify a command to use to create a digital signature.
*sendPrefWin*encryptTF.quickHelp:\
   Specify a command to use to encrypt your message.
*sendPrefWin*encryptSignTF.quickHelp:\
   Command to use to encrypt and digitally sign your message.
*sendPrefWin*mimeDigSignTF.quickHelp:\
   Command to create a digital signature in a MIME message.
*sendPrefWin*mimeEncryptTF.quickHelp:\
   Command to encrypt a MIME message.
*sendPrefWin*mimeEncryptSignTF.quickHelp:\
   Command to encrypt and digitally sign a MIME message.
*sendPrefWin*autoSaveTB.quickHelp:\
   Enable automatic saving of your edits in the Composition window.
*sendPrefWin*autoSaveRateTF.quickHelp:\
   Specify number of seconds between auto-saves of your edits.
*sendPrefWin*autoSaveDirTF.quickHelp:\
   Directory path name for keeping temporary save files.

!---------------------------------------------------------------------------

*mailPrefWin*fromHeadTF.quickHelp:\
   Specify the contents of the "From:" header of all outgoing messages.
*mailPrefWin*mailPlainTB.quickHelp:\
   Send all messages as plain, unformatted text (no MIME content).
*mailPrefWin*mailMimeTB.quickHelp:\
   Use MIME formatting and encoding for all messages.
*mailPrefWin*mailAltTB.quickHelp:\
   Send messages in BOTH plain text and MIME version (plain text alternative).
*mailPrefWin*textRichTB.quickHelp:\
   In MIME messages, mark text as Enriched by default.
*mailPrefWin*textPlainTB.quickHelp:\
   In MIME messages, mark text as Plain by default.
*mailPrefWin*charCB.quickHelp:\
   List possible character sets for encoding the message text and headers.
*mailPrefWin*charTF.quickHelp:\
   Specify the character set for encoding the message text and headers.
*mailPrefWin*bodyEnc8bitTB.quickHelp:\
   Note that the text contains 8-bit characters, but don't otherwise encode them.
*mailPrefWin*bodyEncQpTB.quickHelp:\
   Encode the message text using Quoted Printable encoding.
*mailPrefWin*headEncNoneTB.quickHelp:\
   Leave the text of the message headers alone.
*mailPrefWin*headEncQTB.quickHelp:\
   Encode 8-bit characters in the headers using Quoted Printable encoding.
*mailPrefWin*headEncBTB.quickHelp:\
   Encode 8-bit characters in the headers using Base-64 encoding.
*mailPrefWin*noFccTB.quickHelp:\
   Don't automatically copy outgoing messages to any folder.
*mailPrefWin*fccFolderTB.quickHelp:\
   Automatically copy outgoing messages to a folder.
*mailPrefWin*fccFolderTF.quickHelp:\
   Folder into which outgoing messages should be copied.
*mailPrefWin*fccPatternTB.quickHelp:\
   Copy outgoing messages, select which folder according to pattern match.
*mailPrefWin*fccPatternTF.quickHelp:\
   Directory containing folders into which outgoing messages should be copied.
*mailPrefWin*fccPatternPD*quickHelp:\
   Select pattern to match in outgoing mail, which selects a folder name.
*mailPrefWin*confirmAddrTB.quickHelp:\
   Show a confirmation pop-up before sending mail to the specified addresses.
*mailPrefWin*confirmAddrText*quickHelp:\
   Addresses listed here should be confirmed before each use.
*mailPrefWin*otherHeadText*quickHelp:\
   These headers should be added to each outgoing message.
*mailPrefWin*sendmailTF.quickHelp:\
   Use this command to send outgoing mail.
*mailPrefWin*deadTB.quickHelp:\
   Cause interrupted messages to be saved to a file.
*mailPrefWin*deadTF.quickHelp:\
   Enter the name of a file in which interrupted messages are to be saved.
*mailPrefWin*splitTB.quickHelp:\
   Split large messages into smaller pieces, to be combined by the recipient.
*mailPrefWin*splitTF.quickHelp:\
   Size of the largest piece of a split message (should not exceed 100,000).
*mailPrefWin*checkAddrTB.quickHelp:\
   Before sending mail, confirm that addresses are valid (may be SLOW).

!---------------------------------------------------------------------------

*undelWin*appForm*quickHelp:\
   Select messages from this list which you want to recover.
*undelWin*selectPB.quickHelp:\
   Select all messages in the list.
*undelWin*deselectPB.quickHelp:\
   Deselect all selected messages.

!---------------------------------------------------------------------------

*fontWin*pbTF.quickHelp:\
   Specify the font to use for button labels and menu items.
*fontWin*pbChoosePB.quickHelp:\
   Click here to see a list of font names.
*fontWin*labelTF.quickHelp:\
   Specify the font to use for labels and titles.
*fontWin*labelChoosePB.quickHelp:\
   Click here to see a list of font names.
*fontWin*textTF.quickHelp:\
   Specify the font to use for text fields.
*fontWin*textChoosePB.quickHelp:\
   Click here to see a list of font names.
*fontWin*listTF.quickHelp:\
   Specify the font to use for lists.
*fontWin*listChoosePB.quickHelp:\
   Click here to see a list of font names.
*fontWin*fontRC.richTF.quickHelp:\
   Specify the font to use for MIME enriched text

*fontChooser*nameTF.quickHelp:\
   Enter the name of a font or click Family, Style, and Size from the lists.
*fontChooser*sampText.quickHelp:\
   When a font is chosen, sample text using that font is shown here.
*fontChooser*showFixedTB.quickHelp:\
   Include names of fixed-space fonts in the list.
*fontChooser*showPropTB.quickHelp:\
   Include names of proportional-space fonts in the list.
*fontChooser*sizePixelsTB.quickHelp:\
   The Size column represents pixels.
*fontChooser*sizePointsTB.quickHelp:\
   The Size column represents font point size (72 per inch).
*fontChooser*familyList.quickHelp:\
   List of font Families having this Style and Size.
*fontChooser*styleList.quickHelp:\
   List of possible Styles for this font Family and Size.
*fontChooser*sizeList.quickHelp:\
   List of possible Sizes for this font Family and Style.

!---------------------------------------------------------------------------

*summaryWin*numberTB.quickHelp:\
   Show or hide the message number column.
*summaryWin*statusTB.quickHelp:\
   Show or hide the message status column.
*summaryWin*senderTB.quickHelp:\
   Show or hide the message sender column.
*summaryWin*subjectTB.quickHelp:\
   Show or hide the message subject column.
*summaryWin*dateTB.quickHelp:\
   Show or hide the message date column.
*summaryWin*lineTB.quickHelp:\
   Show or hide the message size (in lines) column.
*summaryWin*byteTB.quickHelp:\
   Show or hide the message size (in bytes) column.
*summaryWin*posTF.quickHelp:\
   Specify the column position, from left (0,1,2,...).
*summaryWin*minTF.quickHelp:\
   Specify the minimum column width (number of characters).
*summaryWin*maxTF.quickHelp:\
   Specify the maximum column width (number of characters).
*summaryWin*titleTF.quickHelp:\
   Specify the name to appear over the column.
*summaryWin*iconTB.quickHelp:\
   Show or hide icons for each message in the message list.
*summaryWin*dateFormatForm*quickHelp:\
   Specify the date format using the syntax of strftime(3).

!-- Folder Preference Window

*folderPrefWin*viewLargeTB.quickHelp:\
  Show folders using large icons. 
*folderPrefWin*viewSmallTB.quickHelp:\
  Show folders using small icons. 
*folderPrefWin*viewNameTB.quickHelp:\
  Show folders by name only (no icons).
*folderPrefWin*sortTB.quickHelp:\
  Sort folders by name, else sort by order opened.
*folderPrefWin*statusTB.quickHelp:\
  Show folder status using different icons.
*folderPrefWin*typeUnixTB.quickHelp:\
  Create new folders using Unix (mailx) format.
*folderPrefWin*typeMhTB.quickHelp:\
  Create new folders using MH-compatible format.
*folderPrefWin*typeMmdfTB.quickHelp:\
  Create new folders using MMDF-compatible format.
*folderPrefWin*typeImapTB.quickHelp:\
  Create new folders on the IMAP server.
*folderPrefWin*useUnixTB.quickHelp:\
  Use local Unix folders in addition to IMAP.
*folderPrefWin*useMhTB.quickHelp:\
  Use local MH folders in addition to IMAP.
*folderPrefWin*useMmdfTB.quickHelp:\
  Use local MMDF folders in addition to IMAP.
*folderPrefWin*useNoneTB.quickHelp:\
  All folders are on the IMAP server.
*folderPrefWin*confirmTypeTB.quickHelp:\
  Ask folder type when creating, or automatically use the default.
*folderPrefWin*initLabel*quickHelp:\
  Folders which should be opened automatically at start-up.
*folderPrefWin*initText*quickHelp:\
  Folders which should be opened automatically at start-up.
*folderPrefWin*rememberTB.quickHelp:\
  Save names of folders open at exit, and reopen at next start-up.

!--------------------------------------------------

*helpResWin*shortNameForm.shortNameTF.quickHelp:\
   This is the abbreviated name of the widget being edited
*helpResWin*longNameForm.longNameTF.quickHelp:\
   This is the full name of the widget being edited
*helpResWin*longNameForm.longNameAB.quickHelp:\
   Click here to edit parent of the current widget
*helpResWin*quickHelpForm.quickHelpTF.quickHelp:\
   Enter the quickHelp string for the widget
*helpResWin*quickNameForm.quickNameTF.quickHelp:\
   This is the name of the widget providing the quickHelp resource
*helpResWin*contCardForm.contCardTF.quickHelp:\
   Enter the name of the contextHelp helpcard
*helpResWin*contNameForm.contNameTF.quickHelp:\
   This is the name of the widget providing the contextHelp resource
*helpResWin*helpCardForm.helpCardTF.quickHelp:\
   Enter the name of the help card for the helpcard resource
*helpResWin*helpNameForm.helpNameTF.quickHelp:\
   This is the name of the widget providing the helpcard resource
*helpResWin*quickNameForm.quickLoadPB.qu