📄 dup2.c
字号:
/***
*dup2.c - Duplicate file handles
*
* Copyright (c) Microsoft Corporation. All rights reserved.
*
*Purpose:
* defines _dup2() - duplicate file handles
*
*******************************************************************************/
#include <cruntime.h>
#include <io.h>
#include <oscalls.h>
#include <msdos.h>
#include <mtdll.h>
#include <errno.h>
#include <stdlib.h>
#include <internal.h>
#include <malloc.h>
#include <dbgint.h>
static int __cdecl extend_ioinfo_arrays(int);
static int __cdecl _dup2_nolock(int, int);
/***
*int _dup2(fh1, fh2) - force handle 2 to refer to handle 1
*
*Purpose:
* Forces file handle 2 to refer to the same file as file
* handle 1. If file handle 2 referred to an open file, that file
* is closed.
*
* Multi-thread: We must hold 2 lowio locks at the same time
* to ensure multi-thread integrity. In order to prevent deadlock,
* we always get the lower file handle lock first. Order of unlocking
* does not matter. If you modify this routine, make sure you don't
* cause any deadlocks! Scary stuff, kids!!
*
*Entry:
* int fh1 - file handle to duplicate
* int fh2 - file handle to assign to file handle 1
*
*Exit:
* returns 0 if successful, -1 (and sets errno) if fails.
*
*Exceptions:
*
*******************************************************************************/
int __cdecl _dup2 (
int fh1,
int fh2
)
{
int retcode;
/* validate file handles */
_CHECK_FH_CLEAR_OSSERR_RETURN( fh1, EBADF, -1 );
_VALIDATE_CLEAR_OSSERR_RETURN((fh1 >= 0 && (unsigned)fh1 < (unsigned)_nhandle), EBADF, -1);
_VALIDATE_CLEAR_OSSERR_RETURN((_osfile(fh1) & FOPEN), EBADF, -1);
_CHECK_FH_CLEAR_OSSERR_RETURN( fh2, EBADF, -1 );
_VALIDATE_CLEAR_OSSERR_RETURN(((unsigned)fh2 < _NHANDLE_), EBADF, -1);
/*
* Make sure there is an ioinfo struct corresponding to fh2.
*/
if ( (fh2 >= _nhandle) && (extend_ioinfo_arrays(fh2) != 0) ) {
errno = ENOMEM;
return -1;
}
/* get the two file handle locks; in order to prevent deadlock,
get the lowest handle lock first. */
if ( fh1 < fh2 ) {
_lock_fh(fh1);
_lock_fh(fh2);
}
else if ( fh1 > fh2 ) {
_lock_fh(fh2);
_lock_fh(fh1);
}
__try {
retcode = _dup2_nolock(fh1, fh2);
}
__finally {
_unlock_fh(fh1);
_unlock_fh(fh2);
}
return retcode;
}
static int __cdecl _dup2_nolock (
int fh1,
int fh2
)
{
ULONG dosretval; /* o.s. return code */
intptr_t new_osfhandle;
/*
* Re-test and take care of case of unopened source handle. This is
* necessary only in the multi-thread case where the file have been
* closed by another thread before the lock was asserted, but after
* the initial test above.
*/
if ( !(_osfile(fh1) & FOPEN) ) {
/*
* Source handle isn't open, bail out with an error.
* Note that the DuplicateHandle API will not detect this
* error since it implies that _osfhnd(fh1) ==
* INVALID_HANDLE_VALUE, and this is a legal HANDLE value
* (it's the HANDLE for the current process).
*/
errno = EBADF;
_doserrno = 0; /* not an OS error */
_ASSERTE(("Invalid file descriptor. File possibly closed by a different thread",0));
return -1;
}
/*
* Take of the case of equal handles.
*/
if ( fh1 == fh2 )
/*
* Since fh1 is known to be open, return 0 indicating success.
* This is in conformance with the POSIX specification for
* dup2.
*/
return 0;
/*
* if fh2 is open, close it.
*/
if ( _osfile(fh2) & FOPEN )
/*
* close the handle. ignore the possibility of an error - an
* error simply means that an OS handle value may remain bound
* for the duration of the process. Use _close_nolock as we
* already own lock
*/
(void) _close_nolock(fh2);
/* Duplicate source file onto target file */
if ( !(DuplicateHandle(GetCurrentProcess(),
(HANDLE)_get_osfhandle(fh1),
GetCurrentProcess(),
(PHANDLE)&new_osfhandle,
0L,
TRUE,
DUPLICATE_SAME_ACCESS)) )
{
dosretval = GetLastError();
}
else {
_set_osfhnd(fh2, new_osfhandle);
dosretval = 0;
}
if (dosretval) {
_dosmaperr(dosretval);
return -1;
}
/* copy the _osfile information, with the FNOINHERIT bit cleared */
_osfile(fh2) = _osfile(fh1) & ~FNOINHERIT;
_textmode(fh2) = _textmode(fh1);
_tm_unicode(fh2) = _tm_unicode(fh1);
return 0;
}
/***
*static int extend_ioinfo_arrays( int fh ) - extend ioinfo arrays to fh
*
*Purpose:
* Allocate and initialize arrays of ioinfo structs,filling in
* __pioinfo[],until there is an ioinfo struct corresponding to fh.
*
* Note: It is assumed the fh < _NHANDLE_!
*
*Entry:
* int fh - C file handle corresponding to ioinfo
*
*Exit:
* returns 0 if successful, -1
*
*Exceptions:
*
*******************************************************************************/
static int __cdecl extend_ioinfo_arrays(
int fh
)
{
ioinfo *pio;
int i;
/*
* Walk __pioinfo[], allocating an array of ioinfo structs for each
* empty entry, until there is an ioinfo struct corresponding to fh.
*/
for ( i = 0 ; fh >= _nhandle ; i++ ) {
if ( __pioinfo[i] == NULL ) {
if ( (pio = _calloc_crt( IOINFO_ARRAY_ELTS, sizeof(ioinfo) ))
!= NULL )
{
__pioinfo[i] = pio;
_nhandle += IOINFO_ARRAY_ELTS;
for ( ; pio < __pioinfo[i] + IOINFO_ARRAY_ELTS ; pio++ ) {
pio->osfile = 0;
pio->osfhnd = (intptr_t)INVALID_HANDLE_VALUE;
pio->pipech = 10;
pio->lockinitflag = 0;
}
}
else {
/*
* Couldn't allocate another array, return failure.
*/
return -1;
}
}
}
return 0;
}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -