top.fit

（珍藏）51单片机开发板原理图应用范例、PCB图

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 08/27/2007 16:49:55      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "top"
BEGIN

    DEVICE = "EPM7064SLC44-10";

    "ALE"                          : INPUT_PIN  = 43     ;
    "A15"                          : INPUT_PIN  = 1      ;
    "RD"                           : INPUT_PIN  = 44     ;
    "WR"                           : INPUT_PIN  = 2      ;
    "AD0"                          : OUTPUT_PIN = 27     ; -- LC37
    "AD1"                          : OUTPUT_PIN = 28     ; -- LC40
    "AD2"                          : OUTPUT_PIN = 29     ; -- LC41
    "AD3"                          : OUTPUT_PIN = 31     ; -- LC46
    "AD4"                          : OUTPUT_PIN = 34     ; -- LC51
    "AD5"                          : OUTPUT_PIN = 33     ; -- LC49
    "AD6"                          : OUTPUT_PIN = 36     ; -- LC52
    "AD7"                          : OUTPUT_PIN = 37     ; -- LC53
    "AD8"                          : OUTPUT_PIN = 39     ; -- LC57
    "AD9"                          : OUTPUT_PIN = 40     ; -- LC62
    "AD10"                         : OUTPUT_PIN = 4      ; -- LC16
    "AD11"                         : OUTPUT_PIN = 5      ; -- LC14
    "AD12"                         : OUTPUT_PIN = 6      ; -- LC11
    "AD13"                         : OUTPUT_PIN = 8      ; -- LC5
    "AD14"                         : OUTPUT_PIN = 9      ; -- LC4
    "CK_out"                       : OUTPUT_PIN = 11     ; -- LC3
    "RAM_RD"                       : OUTPUT_PIN = 14     ; -- LC30
    "STATE_out"                    : OUTPUT_PIN = 12     ; -- LC1
    "P00"                          : BIDIR_PIN  = 17     ; -- LC24
    "P01"                          : BIDIR_PIN  = 18     ; -- LC21
    "P02"                          : BIDIR_PIN  = 19     ; -- LC20
    "P03"                          : BIDIR_PIN  = 20     ; -- LC19
    "P04"                          : BIDIR_PIN  = 21     ; -- LC17
    "P05"                          : BIDIR_PIN  = 24     ; -- LC33
    "P06"                          : BIDIR_PIN  = 25     ; -- LC35
    "P07"                          : BIDIR_PIN  = 26     ; -- LC36
    "CK_out~fit~in1"               : LOCATION   = LC29   ;
    "|div_clk:54|count0"           : LOCATION   = LC9    ;
    "|div_clk:54|count1"           : LOCATION   = LC6    ;
    "|div_clk:54|count2"           : LOCATION   = LC10   ;
    "|div_clk:54|count3"           : LOCATION   = LC18   ;
    "|div_clk:54|count4"           : LOCATION   = LC12   ;
    "|div_clk:54|count5"           : LOCATION   = LC64   ; -- PIN 41
    "|div_clk:54|count6"           : LOCATION   = LC60   ;
    "|mcu_ctrl:21|74373:112|:12"   : LOCATION   = LC22   ;
    "|mcu_ctrl:21|74373:112|:13"   : LOCATION   = LC28   ;
    "|mcu_ctrl:21|74373:112|:14"   : LOCATION   = LC27   ;
    "|mcu_ctrl:21|74373:112|:15"   : LOCATION   = LC26   ;
    "|mcu_ctrl:21|74373:112|:16"   : LOCATION   = LC56   ; -- PIN 38
    "|74273b:18|~12~1"             : LOCATION   = LC25   ; -- PIN 16  -- |74273b:18|Q8~1

END;

INTERNAL_INFO "top"
BEGIN
	DEVICE = EPM7064SLC44-10;
	LC36    : LORAX = "G61R0";
	LC35    : LORAX = "G60R0,PA12R0C0,PA12R0C1,PA12R0C2,PA12R0C3";
	OH34R0P25 : LORAX = "G126R0,PA29R0C2";
	LC33    : LORAX = "G58R0,PA13R0C0,PA13R0C1,PA13R0C2,PA13R0C3";
	OH32R0P24 : LORAX = "G124R0,PA28R0C2";
	LC17    : LORAX = "G54R0,PA16R0C0,PA16R0C1,PA16R0C2,PA16R0C3";
	OH16R0P21 : LORAX = "G120R0,PA27R0C1,PA27R0C3";
	LC19    : LORAX = "G56R0";
	LC20    : LORAX = "G57R0";
	LC21    : LORAX = "G21R0,PA7R0C2,PA7R0C3,PA7R0C0";
	OH20R0P18 : LORAX = "G87R0,PA20R0C1";
	LC24    : LORAX = "G24R0,PA0R0C1,PA0R0C2,PA0R0C3,PA0R0C0";
	OH23R0P17 : LORAX = "G90R0,PA25R0C1";
	LC4     : LORAX = "G20R0,PA6R0C0";
	LC5     : LORAX = "G50R0,PA14R0C0";
	LC11    : LORAX = "G68R0,PA23R0C0";
	LC14    : LORAX = "G100R0,PA31R0C0";
	LC16    : LORAX = "G102R0,PA34R0C0";
	LC62    : LORAX = "G112R0,PA35R0C0";
	LC57    : LORAX = "G78R0,PA24R0C0,PA20R0C3";
	LC53    : LORAX = "G62R0,PA17R0C0,PA17R0C3";
	LC52    : LORAX = "G32R0,PA2R0C3,PA2R0C0";
	LC49    : LORAX = "G29R0,PA8R0C3,PA8R0C0";
	LC51    : LORAX = "G31R0,PA3R0C0,PA3R0C3";
	LC46    : LORAX = "G75R0,PA20R0C0,PA23R0C3";
	LC41    : LORAX = "G107R0,PA27R0C2,PA27R0C0,PA35R0C3";
	LC40    : LORAX = "G28R0,PA5R0C2,PA5R0C3,PA5R0C0";
	LC37    : LORAX = "G25R0,PA4R0C3,PA4R0C2,PA4R0C0";
	LC1     : LORAX = "G17R0";
	LC3     : LORAX = "G19R0";
	LC30    : LORAX = "G71R0";
	OH67R0P2 : LORAX = "G16R0,PA6R0C1,PA6R0C2";
	OH66R0P1 : LORAX = "G49R0,PA15R0C3,PA15R0C0,PA15R0C2,PA15R0C1";
	LC56    : LORAX = "G65R0,PA11R0C0,PA11R0C1,PA11R0C2,PA11R0C3";
	OH64R0P43 : LORAX = "G115R0,PA35R0C1,PA35R0C2,PA33R0C0,PA33R0C3";
	LC26    : LORAX = "G104R0,PA30R0C0,PA30R0C1,PA30R0C2,PA30R0C3";
	LC27    : LORAX = "G105R0,PA33R0C2,PA28R0C0,PA33R0C1,PA28R0C3";
	LC28    : LORAX = "G106R0,PA31R0C2,PA29R0C0,PA29R0C1,PA29R0C3";
	LC22    : LORAX = "G22R0,PA1R0C1,PA1R0C2,PA1R0C3,PA1R0C0";
	OH65R0P44 : LORAX = "G82R0,PA26R0C0,PA24R0C1,PA24R0C2,PA24R0C3";
	LC60    : LORAX = "G81R0,PA22R0C0,PA22R0C3,PA22R0C2,PA22R0C1";
	LC64    : LORAX = "G114R0,PA32R0C0,PA31R0C1,PA32R0C2,PA31R0C3";
	LC12    : LORAX = "G69R0,PA25R0C0,PA26R0C1,PA26R0C2,PA26R0C3";
	LC18    : LORAX = "G55R0,PA10R0C0,PA10R0C1,PA10R0C2,PA10R0C3";
	LC10    : LORAX = "G67R0,PA21R0C0,PA21R0C1,PA21R0C2,PA21R0C3";
	LC6     : LORAX = "G51R0,PA9R0C0,PA9R0C1,PA9R0C2,PA9R0C3";
	LC9     : LORAX = "G66R0,PA19R0C0,PA19R0C1,PA19R0C3,PA19R0C2";
	LC25    : LORAX = "G103R0,OE5";
	LC29    : LORAX = "G70R0,PA18R0C0";
END;