clk_sel.tdf

（珍藏）51单片机开发板原理图应用范例、PCB图

-- megafunction wizard: %LPM_MUX%
-- GENERATION: STANDARD
-- VERSION: WM1.0
-- MODULE: lpm_mux 

-- ============================================================
-- File Name: clk_sel.tdf
-- Megafunction Name(s):
-- 			lpm_mux
-- ============================================================
-- ************************************************************
-- THIS IS A WIZARD GENERATED FILE. DO NOT EDIT THIS FILE!
-- ************************************************************


--	Copyright (C) 1988-2002 Altera Corporation

--	Any megafunction design, and related net list (encrypted or decrypted),
--	support information, device programming or simulation file, and any other
--	associated documentation or information provided by Altera or a partner
--	under Altera's Megafunction Partnership Program may be used only to
--	program PLD devices (but not masked PLD devices) from Altera.  Any other
--	use of such megafunction design, net list, support information, device
--	programming or simulation file, or any other related documentation or
--	information is prohibited for any other purpose, including, but not
--	limited to modification, reverse engineering, de-compiling, or use with
--	any other silicon devices, unless such use is explicitly licensed under
--	a separate agreement with Altera or a megafunction partner.  Title to
--	the intellectual property, including patents, copyrights, trademarks,
--	trade secrets, or maskworks, embodied in any such megafunction design,
--	net list, support information, device programming or simulation file, or
--	any other related documentation or information provided by Altera or a
--	megafunction partner, remains with Altera, the megafunction partner, or
--	their respective licensors.  No other licenses, including any licenses
--	needed under any third party's intellectual property, are provided herein.

INCLUDE "lpm_mux.inc";



SUBDESIGN clk_sel
(
	data7	 : INPUT;
	data6	 : INPUT;
	data5	 : INPUT;
	data4	 : INPUT;
	data3	 : INPUT;
	data2	 : INPUT;
	data1	 : INPUT;
	data0	 : INPUT;
	sel[2..0]	 : INPUT;
	result	 : OUTPUT;
)

VARIABLE

	lpm_mux_component : lpm_mux WITH (
			LPM_SIZE = 8,
			LPM_WIDTHS = 3,
			LPM_WIDTH = 1
			);

BEGIN

	result = lpm_mux_component.result[0..0];
	lpm_mux_component.sel[2..0] = sel[2..0];
	lpm_mux_component.data[7..7][0..0] = data7;
	lpm_mux_component.data[6..6][0..0] = data6;
	lpm_mux_component.data[5..5][0..0] = data5;
	lpm_mux_component.data[4..4][0..0] = data4;
	lpm_mux_component.data[3..3][0..0] = data3;
	lpm_mux_component.data[2..2][0..0] = data2;
	lpm_mux_component.data[1..1][0..0] = data1;
	lpm_mux_component.data[0..0][0..0] = data0;
END;



-- ============================================================
-- CNX file retrieval info
-- ============================================================
-- Retrieval info: CONSTANT: LPM_SIZE NUMERIC "8"
-- Retrieval info: CONSTANT: LPM_WIDTHS NUMERIC "3"
-- Retrieval info: CONSTANT: LPM_WIDTH NUMERIC "1"
-- Retrieval info: USED_PORT: result 0 0 0 0 OUTPUT NODEFVAL result
-- Retrieval info: USED_PORT: data7 0 0 0 0 INPUT NODEFVAL data7
-- Retrieval info: USED_PORT: data6 0 0 0 0 INPUT NODEFVAL data6
-- Retrieval info: USED_PORT: data5 0 0 0 0 INPUT NODEFVAL data5
-- Retrieval info: USED_PORT: data4 0 0 0 0 INPUT NODEFVAL data4
-- Retrieval info: USED_PORT: data3 0 0 0 0 INPUT NODEFVAL data3
-- Retrieval info: USED_PORT: data2 0 0 0 0 INPUT NODEFVAL data2
-- Retrieval info: USED_PORT: data1 0 0 0 0 INPUT NODEFVAL data1
-- Retrieval info: USED_PORT: data0 0 0 0 0 INPUT NODEFVAL data0
-- Retrieval info: USED_PORT: sel 0 0 3 0 INPUT NODEFVAL sel[2..0]
-- Retrieval info: CONNECT: result 0 0 0 0 @result 0 0 1 0
-- Retrieval info: CONNECT: @data 1 7 1 0 data7 0 0 0 0
-- Retrieval info: CONNECT: @data 1 6 1 0 data6 0 0 0 0
-- Retrieval info: CONNECT: @data 1 5 1 0 data5 0 0 0 0
-- Retrieval info: CONNECT: @data 1 4 1 0 data4 0 0 0 0
-- Retrieval info: CONNECT: @data 1 3 1 0 data3 0 0 0 0
-- Retrieval info: CONNECT: @data 1 2 1 0 data2 0 0 0 0
-- Retrieval info: CONNECT: @data 1 1 1 0 data1 0 0 0 0
-- Retrieval info: CONNECT: @data 1 0 1 0 data0 0 0 0 0
-- Retrieval info: CONNECT: @sel 0 0 3 0 sel 0 0 3 0