makefile.in

CORBA上的libIDL源代码

	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`

.txi.dvi:
	TEXINPUTS=.:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.txi:
	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
	cd $(srcdir) \
	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
.dvi.ps:
	$(DVIPS) $< -o $@

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(infodir)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  d=$(srcdir); \
	  for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
	    if test -f $$d/$$ifile; then \
	      echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
	      $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
	  done; \
	else : ; fi

uninstall-info:
	$(PRE_UNINSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  ii=yes; \
	else ii=; fi; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  test -z "$ii" \
	    || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
	done
	@$(NORMAL_UNINSTALL)
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
	done

dist-info: $(INFO_DEPS)
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  d=$(srcdir); \
	  for file in `cd $$d && eval echo $$base*`; do \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -f libIDL.aux libIDL.cp libIDL.cps libIDL.dvi libIDL.fn libIDL.fns \
	  libIDL.ky libIDL.kys libIDL.ps libIDL.log libIDL.pg \
	  libIDL.toc libIDL.tp libIDL.tps libIDL.vr libIDL.vrs \
	  libIDL.op libIDL.tr libIDL.cv libIDL.cn

clean-aminfo:

distclean-aminfo:

maintainer-clean-aminfo:
	cd $(srcdir) && for i in $(INFO_DEPS); do \
	  rm -f $$i; \
	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
	    rm -f $$i-[0-9]*; \
	  fi; \
	done

install-confexecDATA: $(confexec_DATA)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(confexecdir)
	@list='$(confexec_DATA)'; for p in $$list; do \
	  if test -f $(srcdir)/$$p; then \
	    echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(confexecdir)/$$p"; \
	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(confexecdir)/$$p; \
	  else if test -f $$p; then \
	    echo " $(INSTALL_DATA) $$p $(DESTDIR)$(confexecdir)/$$p"; \
	    $(INSTALL_DATA) $$p $(DESTDIR)$(confexecdir)/$$p; \
	  fi; fi; \
	done

uninstall-confexecDATA:
	@$(NORMAL_UNINSTALL)
	list='$(confexec_DATA)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(confexecdir)/$$p; \
	done

install-m4dataDATA: $(m4data_DATA)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(m4datadir)
	@list='$(m4data_DATA)'; for p in $$list; do \
	  if test -f $(srcdir)/$$p; then \
	    echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(m4datadir)/$$p"; \
	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(m4datadir)/$$p; \
	  else if test -f $$p; then \
	    echo " $(INSTALL_DATA) $$p $(DESTDIR)$(m4datadir)/$$p"; \
	    $(INSTALL_DATA) $$p $(DESTDIR)$(m4datadir)/$$p; \
	  fi; fi; \
	done

uninstall-m4dataDATA:
	@$(NORMAL_UNINSTALL)
	list='$(m4data_DATA)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(m4datadir)/$$p; \
	done

install-pkgincludeHEADERS: $(pkginclude_HEADERS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(pkgincludedir)
	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
	  if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \
	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(pkgincludedir)/$$p"; \
	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(pkgincludedir)/$$p; \
	done

uninstall-pkgincludeHEADERS:
	@$(NORMAL_UNINSTALL)
	list='$(pkginclude_HEADERS)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(pkgincludedir)/$$p; \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	-rm -rf $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	dc_install_base=`cd $(distdir)/=inst && pwd`; \
	cd $(distdir)/=build \
	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) dist
	-rm -rf $(distdir)
	@banner="$(distdir).tar.gz is ready for distribution"; \
	dashes=`echo "$$banner" | sed s/./=/g`; \
	echo "$$dashes"; \
	echo "$$banner"; \
	echo "$$dashes"
dist: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
dist-all: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
distdir: $(DISTFILES)
	-rm -rf $(distdir)
	mkdir $(distdir)
	-chmod 777 $(distdir)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
lexer.lo lexer.o : lexer.c rename.h util.h IDL.h parser.h
ns.lo ns.o : ns.c rename.h util.h IDL.h
parser.lo parser.o : parser.c rename.h util.h IDL.h
tstidl.o: tstidl.c IDL.h
util.lo util.o : util.c rename.h util.h IDL.h

info-am: $(INFO_DEPS)
info: info-am
dvi-am: $(DVIS)
dvi: dvi-am
check-am: all-am
check: check-am
installcheck-am:
installcheck: installcheck-am
install-exec-am: install-libLTLIBRARIES install-binSCRIPTS \
		install-confexecDATA
install-exec: install-exec-am

install-data-am: install-info-am install-m4dataDATA \
		install-pkgincludeHEADERS
install-data: install-data-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-am
uninstall-am: uninstall-libLTLIBRARIES uninstall-binSCRIPTS \
		uninstall-info uninstall-confexecDATA \
		uninstall-m4dataDATA uninstall-pkgincludeHEADERS
uninstall: uninstall-am
all-am: Makefile $(INFO_DEPS) $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) \
		$(DATA) $(HEADERS)
all-redirect: all-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
installdirs:
	$(mkinstalldirs)  $(DESTDIR)$(libdir) $(DESTDIR)$(bindir) \
		$(DESTDIR)$(infodir) $(DESTDIR)$(confexecdir) \
		$(DESTDIR)$(m4datadir) $(DESTDIR)$(pkgincludedir)


mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
mostlyclean-am:  mostlyclean-libLTLIBRARIES mostlyclean-compile \
		mostlyclean-libtool mostlyclean-noinstPROGRAMS \
		mostlyclean-aminfo mostlyclean-tags mostlyclean-generic

mostlyclean: mostlyclean-am

clean-am:  clean-libLTLIBRARIES clean-compile clean-libtool \
		clean-noinstPROGRAMS clean-aminfo clean-tags \
		clean-generic mostlyclean-am

clean: clean-am

distclean-am:  distclean-libLTLIBRARIES distclean-compile \
		distclean-libtool distclean-noinstPROGRAMS \
		distclean-aminfo distclean-tags distclean-generic \
		clean-am
	-rm -f libtool

distclean: distclean-am
	-rm -f config.status

maintainer-clean-am:  maintainer-clean-libLTLIBRARIES \
		maintainer-clean-compile maintainer-clean-libtool \
		maintainer-clean-noinstPROGRAMS maintainer-clean-aminfo \
		maintainer-clean-tags maintainer-clean-generic \
		distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-am
	-rm -f config.status

.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
distclean-compile clean-compile maintainer-clean-compile \
mostlyclean-libtool distclean-libtool clean-libtool \
maintainer-clean-libtool mostlyclean-noinstPROGRAMS \
distclean-noinstPROGRAMS clean-noinstPROGRAMS \
maintainer-clean-noinstPROGRAMS uninstall-binSCRIPTS install-binSCRIPTS \
install-info-am uninstall-info mostlyclean-aminfo distclean-aminfo \
clean-aminfo maintainer-clean-aminfo uninstall-confexecDATA \
install-confexecDATA uninstall-m4dataDATA install-m4dataDATA \
uninstall-pkgincludeHEADERS install-pkgincludeHEADERS tags \
mostlyclean-tags distclean-tags clean-tags maintainer-clean-tags \
distdir info-am info dvi-am dvi check check-am installcheck-am \
installcheck install-exec-am install-exec install-data-am install-data \
install-am install uninstall-am uninstall all-redirect all-am all \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean


lexer.c: $(srcdir)/lexer.l parser.h
	@rm -f $@
	$(LEX) $(LFLAGS) -t $(srcdir)/lexer.l | sed -e 's/yy/__IDL_/g' >$@

stamp-parser: $(srcdir)/parser.y
	$(YACC) $(YFLAGS) $(srcdir)/parser.y
	touch $@

parser.c: stamp-parser
	test -f y.tab.c && mv -f y.tab.c parser.c || touch $@

parser.h: stamp-parser
	test -f y.tab.h && mv -f y.tab.h parser.h || touch $@

IDL.h: IDL.h.new
	@:

libIDLConf.sh: libIDLConf.sh.in Makefile
	sed -e 's?\@LIBIDL_LIBDIR\@?$(LIBIDL_LIBDIR)?g' \
		-e 's?\@LIBIDL_INCLUDEDIR\@?$(LIBIDL_INCLUDEDIR)?g' \
		-e 's?\@LIBIDL_LIBS\@?$(LIBIDL_LIBS)?g' \
		-e 's?\@VERSION\@?$(VERSION)?g' \
		< $(srcdir)/libIDLConf.sh.in > libIDLConf.tmp \
		&& mv libIDLConf.tmp libIDLConf.sh

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: