config.help

来自「是关于linux2.5.1的完全源码」· HELP 代码 · 共 111 行

CONFIG_PCMCIA_XIRCOM
  This driver is for the Digital "Tulip" Ethernet CardBus adapters.
  It should work with most DEC 21*4*-based chips/ethercards, as well
  as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and
  ASIX.

  This driver is also available as a module ( = code which can be
  inserted in and removed from the running kernel whenever you want).
  The module will be called xircom_cb.o.  If you want to compile
  it as a module, say M here and read
  <file:Documentation/modules.txt>. If unsure, say N.

CONFIG_PCMCIA_XIRTULIP
  This driver is for the Digital "Tulip" Ethernet CardBus adapters.
  It should work with most DEC 21*4*-based chips/ethercards, as well
  as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and
  ASIX.

  This driver is also available as a module ( = code which can be
  inserted in and removed from the running kernel whenever you want).
  The module will be called xircom_tulip_cb.o.  If you want to compile
  it as a module, say M here and read
  <file:Documentation/modules.txt>. If unsure, say N.

CONFIG_DE2104X
  This driver is developed for the SMC EtherPower series Ethernet
  cards and also works with cards based on the DECchip
  21040 (Tulip series) chips.  Some LinkSys PCI cards are
  of this type.  (If your card is NOT SMC EtherPower 10/100 PCI
  (smc9332dst), you can also try the driver for "Generic DECchip"
  cards, above.  However, most people with a network card of this type
  will say Y here.) Do read the Ethernet-HOWTO, available from
  <http://www.linuxdoc.org/docs.html#howto>.  More specific
  information is contained in
  <file:Documentation/DocBook/tulip-user.tmpl>.
  
  This driver is also available as a module ( = code which can be
  inserted in and removed from the running kernel whenever you want).
  The module will be called tulip.o.  If you want to compile it as a
  module, say M here and read <file:Documentation/modules.txt> as well
  as <file:Documentation/networking/net-modules.txt>.

CONFIG_TULIP
  This driver is developed for the SMC EtherPower series Ethernet
  cards and also works with cards based on the DECchip 
  21040/21041/21140 (Tulip series) chips.  Some LinkSys PCI cards are
  of this type.  (If your card is NOT SMC EtherPower 10/100 PCI
  (smc9332dst), you can also try the driver for "Generic DECchip"
  cards, above.  However, most people with a network card of this type
  will say Y here.) Do read the Ethernet-HOWTO, available from
  <http://www.linuxdoc.org/docs.html#howto>.  More specific
  information is contained in 
  <file:Documentation/networking/tulip.txt>.
  
  This driver is also available as a module ( = code which can be
  inserted in and removed from the running kernel whenever you want).
  The module will be called tulip.o.  If you want to compile it as a
  module, say M here and read <file:Documentation/modules.txt> as well
  as <file:Documentation/networking/net-modules.txt>.

CONFIG_TULIP_MWI
  This configures your Tulip card specifically for the card and
  system cache line size type you are using.
  
  This is experimental code, not yet tested on many boards.

  If unsure, say N.

CONFIG_TULIP_MMIO
  Use PCI shared memory for the NIC registers, rather than going through
  the Tulip's PIO (programmed I/O ports).  Faster, but could produce
  obscure bugs if your mainboard has memory controller timing issues.
  If in doubt, say N.

CONFIG_NET_TULIP
  This selects the "Tulip" family of EISA/PCI network cards.

CONFIG_DE4X5
  This is support for the DIGITAL series of PCI/EISA Ethernet cards.
  These include the DE425, DE434, DE435, DE450 and DE500 models.  If
  you have a network card of this type, say Y and read the
  Ethernet-HOWTO, available from
  <http://www.linuxdoc.org/docs.html#howto>. More specific
  information is contained in
  <file:Documentation/networking/de4x5.txt>.
  
  This driver is also available as a module ( = code which can be
  inserted in and removed from the running kernel whenever you want).
  The module will be called de4x5.o.  If you want to compile it as a
  module, say M here and read <file:Documentation/modules.txt> as well
  as <file:Documentation/networking/net-modules.txt>.

CONFIG_WINBOND_840
  This driver is for the Winbond W89c840 chip.  It also works with 
  the TX9882 chip on the Compex RL100-ATX board.
  More specific information and updates are available from
  <http://www.scyld.com/network/drivers.html>.

CONFIG_DM9102
  This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
  Davicom (<http://www.davicom.com.tw/>).  If you have such a network
  (Ethernet) card, say Y.  Some information is contained in the file
  <file:Documentation/networking/dmfe.txt>.
  
  This driver is also available as a module ( = code which can be
  inserted in and removed from the running kernel whenever you want).
  The module will be called dmfe.o.  If you want to compile it as a
  module, say M here and read <file:Documentation/modules.txt> as well
  as <file:Documentation/networking/net-modules.txt>.