config.help

是关于linux2.5.1的完全源码

CONFIG_SCSI_ACORNSCSI_3
  This enables support for the Acorn SCSI card (aka30). If you have an
  Acorn system with one of these, say Y. If unsure, say N.

CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
  Say Y here to enable tagged queuing support on the Acorn SCSI card.

  This is a feature of SCSI-2 which improves performance: the host
  adapter can send several SCSI commands to a device's queue even if
  previous commands haven't finished yet. Some SCSI devices don't
  implement this properly, so the safe answer is N.

CONFIG_SCSI_ACORNSCSI_SYNC
  Say Y here to enable synchronous transfer negotiation with all
  targets on the Acorn SCSI card.

  In general, this improves performance; however some SCSI devices
  don't implement it properly, so the safe answer is N.

CONFIG_SCSI_ARXESCSI
  Around 1991, Arxe Systems Limited released a high density floppy
  disc interface for the Acorn Archimedes range, to allow the use of
  HD discs from the then new A5000 on earlier models. This interface
  was either sold on its own or with an integral SCSI controller.
  Technical details on this NCR53c94-based device are available at
  <http://www.cryton.demon.co.uk/acornbits/scsi_arxe.html>
  Say Y here to compile in support for the SCSI controller.

CONFIG_SCSI_OAK1
  This enables support for the Oak SCSI card. If you have an Acorn
  system with one of these, say Y. If unsure, say N.

CONFIG_SCSI_CUMANA_1
  This enables support for the Cumana SCSI I card. If you have an
  Acorn system with one of these, say Y. If unsure, say N.

CONFIG_SCSI_CUMANA_2
  This enables support for the Cumana SCSI II card. If you have an
  Acorn system with one of these, say Y. If unsure, say N.

CONFIG_SCSI_ECOSCSI
  This enables support for the EcoSCSI card -- a small card that sits
  in the Econet socket. If you have an Acorn system with one of these,
  say Y. If unsure, say N.

CONFIG_SCSI_EESOXSCSI
  This enables support for the EESOX SCSI card. If you have an Acorn
  system with one of these, say Y, otherwise say N.

CONFIG_SCSI_POWERTECSCSI
  This enables support for the Powertec SCSI card on Acorn systems. If
  you have one of these, say Y. If unsure, say N.