config.help

来自「是关于linux2.5.1的完全源码」· HELP 代码 · 共 268 行

CONFIG_ISDN_DRV_HISAX
  This is a driver supporting the Siemens chipset on various
  ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles
  S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many
  compatibles).

  HiSax is just the name of this driver, not the name of any hardware.

  If you have a card with such a chipset, you should say Y here and
  also to the configuration option of the driver for your particular
  card, below.

CONFIG_HISAX_EURO
  Say Y or N according to the D-channel protocol which your local
  telephone service company provides.

  The call control protocol E-DSS1 is used in most European countries.
  If unsure, say Y.

CONFIG_DE_AOC
  If you want that the HiSax hardware driver sends messages to the
  upper level of the isdn code on each AOCD (Advice Of Charge, During
  the call -- transmission of the fee information during a call) and
  on each AOCE (Advice Of Charge, at the End of the call --
  transmission of fee information at the end of the call), say Y here.
  This works only in Germany.

CONFIG_HISAX_NO_SENDCOMPLETE
  If you have trouble with some ugly exchanges or you live in
  Australia select this option.

CONFIG_HISAX_NO_LLC
  If you have trouble with some ugly exchanges try to select this
  option.

CONFIG_HISAX_NO_KEYPAD
  If you like to send special dial strings including * or # without
  using the keypad protocol, select this option.

CONFIG_HISAX_1TR6
  Say Y or N according to the D-channel protocol which your local
  telephone service company provides.

  1TR6 is an old call control protocol which was used in Germany
  before E-DSS1 was established. Nowadays, all new lines in Germany
  use E-DSS1.

CONFIG_HISAX_NI1
  Enable this if you like to use ISDN in US on a NI1 basic rate
  interface.

CONFIG_HISAX_MAX_CARDS
  This option allows you to specify the maximum number of cards which
  the HiSax driver will be able to handle.  

CONFIG_HISAX_16_0
  This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8
  and many compatibles.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using the different cards, a different D-channel protocol, or
  non-standard IRQ/port/shmem settings.

CONFIG_HISAX_16_3
  This enables HiSax support for the Teles ISDN-cards S0-16.3 the
  Teles/Creatix PnP and the Teles PCMCIA.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using the different cards, a different D-channel protocol, or
  non-standard IRQ/port settings.

CONFIG_HISAX_TELESPCI
  This enables HiSax support for the Teles PCI.
  See <file:Documentation/isdn/README.HiSax> on how to configure it.

CONFIG_HISAX_S0BOX
  This enables HiSax support for the Teles/Creatix parallel port
  S0BOX.  See <file:Documentation/isdn/README.HiSax> on how to
  configure it.

CONFIG_HISAX_AVM_A1
  This enables HiSax support for the AVM A1 (aka "Fritz").

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using the different cards, a different D-channel protocol, or
  non-standard IRQ/port settings.

CONFIG_HISAX_FRITZPCI
  This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
  See <file:Documentation/isdn/README.HiSax> on how to configure it.

CONFIG_HISAX_AVM_A1_PCMCIA
  This enables HiSax support for the AVM A1 "Fritz!PCMCIA").
  See <file:Documentation/isdn/README.HiSax> on how to configure it.

CONFIG_HISAX_ELSA
  This enables HiSax support for the Elsa Mircolink ISA cards, for the
  Elsa Quickstep series cards and Elsa PCMCIA.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using the different cards, a different D-channel protocol, or
  non-standard IRQ/port settings.

CONFIG_HISAX_IX1MICROR2
  This enables HiSax support for the ITK ix1-micro Revision 2 card.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using the different cards, a different D-channel protocol, or
  non-standard IRQ/port settings.

CONFIG_HISAX_DIEHLDIVA
  This enables HiSax support for the Eicon.Diehl Diva none PRO
  versions passive ISDN cards.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using the different cards, a different D-channel protocol, or
  non-standard IRQ/port settings.

CONFIG_HISAX_ASUSCOM
  This enables HiSax support for the AsusCom and their OEM versions
  passive ISDN ISA cards.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using the different cards, a different D-channel protocol, or
  non-standard IRQ/port settings.

CONFIG_HISAX_TELEINT
  This enables HiSax support for the TELEINT SA1 semiactiv ISDN card.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using the different cards, a different D-channel protocol, or
  non-standard IRQ/port settings.

CONFIG_HISAX_HFCS
  This enables HiSax support for the HFC-S 2BDS0 based cards, like
  teles 16.3c.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using the different cards, a different D-channel protocol, or
  non-standard IRQ/port settings.

CONFIG_HISAX_SEDLBAUER
  This enables HiSax support for the Sedlbauer passive ISDN cards.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using the different cards, a different D-channel protocol, or
  non-standard IRQ/port settings.

CONFIG_HISAX_SPORTSTER
  This enables HiSax support for the USR Sportster internal TA card.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using a different D-channel protocol, or non-standard IRQ/port
  settings.

CONFIG_HISAX_MIC
  This enables HiSax support for the ITH MIC card.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using a different D-channel protocol, or non-standard IRQ/port
  settings.

CONFIG_HISAX_NETJET
  This enables HiSax support for the NetJet from Traverse
  Technologies.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using a different D-channel protocol, or non-standard IRQ/port
  settings.

CONFIG_HISAX_NETJET_U
  This enables HiSax support for the Netspider U interface ISDN card
  from Traverse Technologies.
  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using a different D-channel protocol, or non-standard IRQ/port
  settings.

CONFIG_HISAX_NICCY
  This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using a different D-channel protocol, or non-standard IRQ/port
  settings.

CONFIG_HISAX_ISURF
  This enables HiSax support for the Siemens I-Talk/I-Surf card with
  ISAR chip.
  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using a different D-channel protocol, or non-standard IRQ/port
  settings.

CONFIG_HISAX_HSTSAPHIR
  This enables HiSax support for the HST Saphir card.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using a different D-channel protocol, or non-standard IRQ/port
  settings.

CONFIG_HISAX_BKM_A4T
  This enables HiSax support for the Telekom A4T card.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using a different D-channel protocol, or non-standard IRQ/port
  settings.

CONFIG_HISAX_SCT_QUADRO
  This enables HiSax support for the Scitel Quadro card.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using a different D-channel protocol, or non-standard IRQ/port
  settings.

CONFIG_HISAX_GAZEL
  This enables HiSax support for the Gazel cards.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using a different D-channel protocol, or non-standard IRQ/port
  settings.

CONFIG_HISAX_HFC_PCI
  This enables HiSax support for the HFC-S PCI 2BDS0 based cards.

  For more informations see under
  <file:Documentation/isdn/README.hfc-pci>.

CONFIG_HISAX_W6692
  This enables HiSax support for Winbond W6692 based PCI ISDN cards.

  See <file:Documentation/isdn/README.HiSax> on how to configure it
  using a different D-channel protocol, or non-standard IRQ/port
  settings.

CONFIG_HISAX_HFC_SX
  This enables HiSax support for the HFC-S+, HFC-SP and HFC-PCMCIA
  cards. This code is not finished yet.

CONFIG_HISAX_AMD7930
  This enables HiSax support for the AMD7930 chips on some SPARCs.
  This code is not finished yet.

CONFIG_HISAX_DEBUG
  This enables debugging code in the new-style HiSax drivers, i.e.
  the ST5481 USB driver currently. 
  If in doubt, say yes.

CONFIG_HISAX_ELSA_CS
  This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink
  card.

CONFIG_HISAX_SEDLBAUER_CS
  This enables the PCMCIA client driver for the Sedlbauer Speed Star
  and Speed Star II cards.

CONFIG_HISAX_ST5481
  This enables the driver for ST5481 based USB ISDN adapters,
  e.g. the BeWan Gazel 128 USB

CONFIG_HISAX_FRITZ_PCIPNP
  This enables the driver for the AVM Fritz!Card PCI, Fritz!Card PCI v2 
  and Fritz!Card PnP.
  (the latter also needs you to select "ISA Plug and Play support"
  from the menu "Plug and Play configuration")

CONFIG_HISAX_FRITZ_CLASSIC
  This enables the driver for the AVM Fritz!Card classic, formerly
  known as AVM A1.