mvme5100_setup.c
来自「是关于linux2.5.1的完全源码」· C语言 代码 · 共 285 行
C
285 行
/* * arch/ppc/platforms/mvme5100_setup.c * * Board setup routines for the Motorola MVME5100. * * Author: Matt Porter <mporter@mvista.com> * * Copyright 2001 MontaVista Software Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */#include <linux/config.h>#include <linux/stddef.h>#include <linux/kernel.h>#include <linux/init.h>#include <linux/errno.h>#include <linux/reboot.h>#include <linux/pci.h>#include <linux/kdev_t.h>#include <linux/major.h>#include <linux/blk.h>#include <linux/console.h>#include <linux/delay.h>#include <linux/irq.h>#include <linux/ide.h>#include <linux/seq_file.h>#include <asm/system.h>#include <asm/pgtable.h>#include <asm/page.h>#include <asm/time.h>#include <asm/dma.h>#include <asm/io.h>#include <asm/machdep.h>#include <asm/prom.h>#include <asm/smp.h>#include <asm/open_pic.h>#include <asm/i8259.h>#include <platforms/mvme5100.h>#include <asm/todc.h>#include <asm/pci-bridge.h>#include <asm/bootinfo.h>#include <asm/pplus.h>extern char cmd_line[];static u_char mvme5100_openpic_initsenses[] __initdata = { 0, /* 16: i8259 cascade (active high) */ 1, /* 17: TL16C550 UART 1,2 */ 1, /* 18: Enet 1 (front panel or P2) */ 1, /* 19: Hawk Watchdog 1,2 */ 1, /* 20: DS1621 thermal alarm */ 1, /* 21: Universe II LINT0# */ 1, /* 22: Universe II LINT1# */ 1, /* 23: Universe II LINT2# */ 1, /* 24: Universe II LINT3# */ 1, /* 25: PMC1 INTA#, PMC2 INTB# */ 1, /* 26: PMC1 INTB#, PMC2 INTC# */ 1, /* 27: PMC1 INTC#, PMC2 INTD# */ 1, /* 28: PMC1 INTD#, PMC2 INTA# */ 1, /* 29: Enet 2 (front panel) */ 1, /* 30: Abort Switch */ 1, /* 31: RTC Alarm */};static void __initmvme5100_setup_arch(void){ if ( ppc_md.progress ) ppc_md.progress("mvme5100_setup_arch: enter", 0); loops_per_jiffy = 50000000 / HZ;#ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); /* /dev/ram */ else#endif#ifdef CONFIG_ROOT_NFS ROOT_DEV = to_kdev_t(0x00FF); /* /dev/nfs pseudo device */#else ROOT_DEV = to_kdev_t(0x0802); /* /dev/sda2 */#endif#ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con;#endif if ( ppc_md.progress ) ppc_md.progress("mvme5100_setup_arch: find_bridges", 0); /* Setup PCI host bridge */ mvme5100_setup_bridge(); /* Find and map our OpenPIC */ pplus_mpic_init(MVME5100_PCI_MEM_OFFSET); OpenPIC_InitSenses = mvme5100_openpic_initsenses; OpenPIC_NumInitSenses = sizeof(mvme5100_openpic_initsenses); printk("MVME5100 port (C) 2001 MontaVista Software, Inc. (source@mvista.com)\n"); if ( ppc_md.progress ) ppc_md.progress("mvme5100_setup_arch: exit", 0); return;}static void __initmvme5100_init2(void){#ifdef CONFIG_MVME5100_IPMC761_PRESENT request_region(0x00,0x20,"dma1"); request_region(0x20,0x20,"pic1"); request_region(0x40,0x20,"timer"); request_region(0x80,0x10,"dma page reg"); request_region(0xa0,0x20,"pic2"); request_region(0xc0,0x20,"dma2");#endif return;}/* * Interrupt setup and service. * Have MPIC on HAWK and cascaded 8259s on Winbond cascaded to MPIC. */static void __initmvme5100_init_IRQ(void){#ifdef CONFIG_MVME5100_IPMC761_PRESENT int i;#endif if ( ppc_md.progress ) ppc_md.progress("init_irq: enter", 0);#ifdef CONFIG_MVME5100_IPMC761_PRESENT openpic_init(1, NUM_8259_INTERRUPTS, NULL, -1); for(i=0; i < NUM_8259_INTERRUPTS; i++) irq_desc[i].handler = &i8259_pic; i8259_init(NULL);#else openpic_init(1, 0, NULL, -1);#endif if ( ppc_md.progress ) ppc_md.progress("init_irq: exit", 0); return;}/* * Set BAT 3 to map 0xf0000000 to end of physical memory space. */static __inline__ voidmvme5100_set_bat(void){ unsigned long bat3u, bat3l; static int mapping_set = 0; if (!mapping_set) { __asm__ __volatile__( " lis %0,0xf000\n \ ori %1,%0,0x002a\n \ ori %0,%0,0x1ffe\n \ mtspr 0x21e,%0\n \ mtspr 0x21f,%1\n \ isync\n \ sync " : "=r" (bat3u), "=r" (bat3l)); mapping_set = 1; } return;}static unsigned long __initmvme5100_find_end_of_memory(void){ mvme5100_set_bat(); return pplus_get_mem_size(MVME5100_HAWK_SMC_BASE);}static void __initmvme5100_map_io(void){ io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO); ioremap_base = 0xfe000000;}static voidmvme5100_reset_board(void){ __cli(); /* Set exception prefix high - to the firmware */ _nmask_and_or_msr(0, MSR_IP); out_8((u_char *)MVME5100_BOARD_MODRST_REG, 0x01); return;}static voidmvme5100_restart(char *cmd){ volatile ulong i = 10000000; mvme5100_reset_board(); while (i-- > 0); panic("restart failed\n");}static voidmvme5100_halt(void){ __cli(); while (1);}static voidmvme5100_power_off(void){ mvme5100_halt();}static intmvme5100_show_cpuinfo(struct seq_file *m){ seq_printf(m, "vendor\t\t: Motorola\n"); seq_printf(m, "machine\t\t: MVME5100\n"); return 0;}TODC_ALLOC();void __initplatform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7){ parse_bootinfo(find_bootinfo()); isa_io_base = MVME5100_ISA_IO_BASE; isa_mem_base = MVME5100_ISA_MEM_BASE; pci_dram_offset = MVME5100_PCI_DRAM_OFFSET; ppc_md.setup_arch = mvme5100_setup_arch; ppc_md.show_cpuinfo = mvme5100_show_cpuinfo; ppc_md.init_IRQ = mvme5100_init_IRQ; ppc_md.get_irq = openpic_get_irq; ppc_md.init = mvme5100_init2; ppc_md.restart = mvme5100_restart; ppc_md.power_off = mvme5100_power_off; ppc_md.halt = mvme5100_halt; ppc_md.find_end_of_memory = mvme5100_find_end_of_memory; ppc_md.setup_io_mappings = mvme5100_map_io; TODC_INIT(TODC_TYPE_MK48T37, MVME5100_NVRAM_AS0, MVME5100_NVRAM_AS1, MVME5100_NVRAM_DATA, 8); ppc_md.time_init = todc_time_init; ppc_md.set_rtc_time = todc_set_rtc_time; ppc_md.get_rtc_time = todc_get_rtc_time; ppc_md.calibrate_decr = todc_calibrate_decr; ppc_md.nvram_read_val = todc_m48txx_read_val; ppc_md.nvram_write_val = todc_m48txx_write_val; ppc_md.progress = NULL;}
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?